http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이상훈(Sang-Hoon Lee),홍석종(Seok-Jong Hong),조혁진(Hyokjin Cho),서희준(Hee-Jun Seo),문귀원(Guee-Won Moon) 한국항공우주연구원 2010 항공우주기술 Vol.9 No.2
우주환경에서 임무를 수행하는 인공위성의 경우, 조립, 시험, 운용시점까지 위성 표면에 흡착되는 오염물질을 최소화하기 위하여 전 기간 동안 세심한 주의를 기울여야 한다. 위성표면에 흡착된 미세한 오염물질은, 고진공 및 고온, 극저온이 반복되는 가혹한 우주환경속에서 위성의 성능저하 및 효율의 손실을 가져올 수 있다. 예를 들어 위성 표면에 떨어진 입자오염은 별 추적장치의 오류를 발생시킴에 따른 위성 자세제어의 실패를 가져올 수도 있고, 표면에 흡착된 분자오염은 렌즈, 미러, 윈도우 등의 광학기기 및 주요 민감 표면에 작용하여 광학적 특성과 열제어 성능의 저하를 가져올 수 있다. 위성의 조립 및 시험을 관장하는 한국항공우주연구원에서는 위성의 오염물질에 대한 노출을 최소화하기 위해, 오염측정이 이루어지는 청정실을 운용하고 있는데, 본 논문에서는 청정실 및 진공챔버 내의 부유입자측정, 표면입자오염측정, 표면분자오염측정법을 소개하고 오염측정 결과에 대한 분석을 수행하였다. It is necessary to be careful about contamination control to minimize the accumulation of the contamination material on satellite surface during the I&T phase. In the space environment which characterized by high vacuum, high and very low temperature, contamination material causes satellite to lose its own performance. Especially, contamination material can accumulate on critical surfaces such as lenses, mirrors, and sensors. KARI(Korea Aerospace Research Institute) conducts the clean room to control and minimize the contamination effect. This paper introduces the principle of contamination and the method of measure and analysis for the contamination.
액체헬륨을 이용한 위성시험용 극저온패널 냉각시스템 개발 및 검증
조혁진(Hyokjin Cho),문귀원(Guee-Won Moon),서희준(Hee-Jun Seo),이상훈(Sang-Hoon Lee),홍석종(Seok-Jong Hong),최석원(Seok-Weon Choi) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.5
The cooling system utilizing liquid helium to chill the cryopanel (around 800 ㎜ by 700 ㎜ dimensions) down to 4.2 K was designed, implemented, and tested to verify the role of this cryopanel as a heat sink from the payload of spacecraft inside the large thermal vacuum chamber (effective dimensions: 8 m (Φ) × 10 m (L)) of KARI. Two LHe Dewars, one is main Dewar and the other is refilling Dewar, were used to supply liquid helium or cold helium gas into this cryopanel, and flow control for target temperature of the cryopanei within the requirement was done through fine adjustment of pressure inside the LHe Dewars. Return helium gas from the cryopanel was reused as a thermal barrier to minimize the heat influx on the core liquid helium supply pipe. Around three hours cooling time from ambient temperature to 40 K, the capacity to maintain the cryopanel at intermediate temperature, and 1K uniformity over the entire cryopanel surface at around 40 K with 20 W cooling power was verified through the test.
액체헬륨을 이용한 위성시험용 극저온패널 냉각시스템 개발 및 검증
조혁진(Hyokjin Cho),문귀원(Guee-Won Moon),서희준(Hee-Jun Seo),이상훈(Sang-Hoon Lee),홍석종(Seok-Jong Hong),최석원(Seok-Weon Choi) 대한기계학회 2010 大韓機械學會論文集B Vol.34 No.2
인공위성 적외선 탑재체의 열싱크 역할을 위해, 액체헬륨을 이용하여 극저온패널(가로 약 800 ㎜, 세로 약 700 ㎜)을 4.2 K까지 냉각시키는 시스템을 설계, 개발, 검증하였다. 유효직경 8 m, 유효 깊이 10 m의 대형열진공챔버에서 검증된 본 냉각시스템은 500리터 용량의 액체헬륨용기 두 개(극저온 패널로의 액체헬륨 또는 저온헬륨가스 주 공급용기 및 주공급용기로의 재충진용기)를 사용하였는데, 목표인 극저온패널의 냉각 및 온도제어는 주 공급용기 내부의 미세압력조절을 통해 액체헬륨 공급유량을 제어함으로써 이루었다. 극저온패널에 공급된 후 배기되는 저온 헬륨가스는 특별히 설계, 제작된 사중진공배관의 제3층을 흐르며 열차단막의 역할을 수행함으로써, 액체헬륨 공급 라인인 제1층(중심배관)으로의 열유입을 최소화하였다. 극저온패널을 상온에서 40 K(합성표준불확도 194 mK)까지 냉각시키는데 약 3시간이 소요되었으며, 20 W의 열을 발산하는 극저온패널을 40 K 주변 온도에서 1 K 이내의 온도균일도를 가지며 유지할 수 있었다. A cooling system utilizing liquid helium to chill the cryopanel (800 ㎜ × 700 ㎜ dimensions) down to 4.2 K was designed, implemented, and tested to verify the role of the cryopanel as a heat sink for the payload of a spacecraft inside the large thermal vacuum chamber (effective dimensions : 8 m (Φ) × 10 m (L)) of KARI (Korea Aerospace Research Institute). Two LHe (Liquid Helium) Dewars, one for the main supply and the other for refilling, were used to supply liquid helium or cold helium gas into this cryopanel, and flow control for the target temperature of the cryopanel within requirements was done through fine adjustment of the pressure inside the LHe Dewars. The return helium gas from the cryopanel was reused as a thermal barrier to minimize the heat influx on the core liquid helium supply pipe. The test verified a cooling time of around three hours from the ambient temperature to 40 K (combined standard uncertainty of 194 mK), the capacity for maintaining the cryopanel at intermediate temperatures, and a 1 K uniformity over the entire cryopanel surface at around 40 K with 20 W cooling power.
이동명(Dong-Myung Lee),김창현(Chang-Hyun Kim),이주환(Joo-Hwan Lee),김학원(Hak-Won Kim),홍석종(Seok-Jong Hong),김정철(Jung-Chul Kim),신휘범(Hwi-Beom Shin) 전력전자학회 1997 전력전자학술대회 논문집 Vol.1997 No.-
This paper proposes the vector controller of induction motors using one chip microprocessor.<br/> For developing a small and cheap speed control system, we use the one chip microprocessor 80C196MC.<br/> By using the one chip microprocessor we can make an inexpensive and small-sized vector controller for induction motors. We apply indirect vector control<br/> method and space vector modulation method to this system.<br/> The experimental results show that the proposed inverter has high performance features