http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박용완,현부성,김창렬 한국세라믹학회 1992 한국세라믹학회지 Vol.29 No.10
The batches having excess SiO2 to tetrasilicic mica KMg2.5 (Si4O10)F2 were melted at 1450℃. The fabricated samples were heat-treated for the nucleation and the crystallization. The crystallized samples were investigated on several properties. The tetrasilicic mica composition with excess 10 wt% SiO2 was successful both in glassifying and in crystallizing. The optimum temperatures for the nucleation and the crystallization were 680℃ and 1000-1100℃, respectively. The mica and the cristobalite crystallines were identified after heat-treatment. The properties of the samples processed appropriately were as follows, bulk density 2.64g/㎤, thermal expansion coefficient ∼80×10-7/℃, Vicker's hardness ∼105 Kgf/㎟, bending strength ∼666Kgf/㎟, dielectric constant ∼11.1, tan δ 2.5%, volume resistivity 2.35×107∼1.3×1011{{{{ OMEGA }}cm, surface roughness 6.984㎛.
코디어라이트 조성에 있어서 X-선 회절분석과 적외선 분광분석을 이용한 결정화도 측정
박용완,현부성 한국결정성장학회 1992 韓國結晶成長學會誌 Vol.2 No.2
결정화 유리에서의 결정화도 측정, 혹은 소결체에서의 잔류 유리량을 측정할 때 가장 유용한 방법을 찾아내기 위하여 현재까지 보고되어 있는 방법중에서 Ohlberg와 Benedetti의 XRD를 이용한 방법과 IR을 이용한 Hirose의 방법을 선정하여 코디어라이트 조성의 유리와 β-코디어라이트의 혼합물에 대하여 결정화도를 측정하였다. 이들 측정 방법중에서 Ohlberg의 방법은 표준시료가 준비되었을 경우 약 5%의 오차를 보였으며, Benedetti의 방법은 Ohlberg의 방법보다 큰 오차를 보였지만 표준시료를 필요로 하지 않았다. Hirose의 방법은 적은 결정화도 범위에서만 적용가능한 방법인 것으로 보여졌다.
박용완,현부성 한국세라믹학회 1992 한국세라믹학회지 Vol.29 No.10
In producing cordierite glass-ceramics by sintering, following experiments were conducted in order to determine the optimum heat-treatment schedule for high-crystallinity and dense sintered body. The glass composition of 11.67MgO-29.46Al2O3-52.88SiO2-5P2O5-1B2O3 (wt%) was selected on the basis of the early experiment. The 3-step heat treatment schedule was determined by the results of DTA, Dilatometric measurement and high-temperature XRD, where the particle-size-controlled glass powder was used. The degree of densification and the crystallinity were evaluated by the measurement of the bulk density and X-ray scattering intensity. The specimen fired with the optimum conditions showed ${\alpha}$-cordierite phase, relative density ∼98%, crystallinity ∼92%, thermal expansion coefficient ∼30${\times}$10-7/$^{\circ}C$, dielectric constant ∼5.5 and resistivity ∼1.0${\times}$1012 {{{{ OMEGA }}cm, respectively.
코디어라이트계 결정화 유리에 관한 연구 -$TiO_2$ 첨가 효과
박용완,현부성,정준상 한국세라믹학회 1993 한국세라믹학회지 Vol.30 No.12
The effects of TiO2 addition as a nucleating agent on the cordierite glass-ceramics were investigated. The glass compositiion was stoichiometric cordierite composition of 13.7MgO-34.9Al2O3-51.4SiO2(wt%), and TiO2 as a nucleating agent was added by 5, 10 and 15wt% in addition. The optimum amount of TiO2 addition and appropriate heat treatment schedule were determined by using dilatometer, DTA, XRDA and SEM. The composition containing 10wt% TiO2 was proved to be the best among the investigated compositions. And the optimum heat treatment schedule was 840℃-2h for the nucleation and 1140℃-2h for the crystallization. The properties were as follows. The crystallinity was ∼75%, thermal expansion coefficient 33×10-7/℃(25∼700℃), dielectric constant 7.6(1KHz) and Vicker's hardness 5.1GPa.
코디어라이트 조성에 있어서 결정질 상의 정량분석에 관한 연구
박용완,현부성,원종원 한국결정성장학회 1993 韓國結晶成長學會誌 Vol.3 No.2
결정화 유리에서의 결정질 양의 측정, 혹은 소결체에서의 잔류 유리량을 측정할 때 유용한 방법을 찾아내기 위하여 현재까지 보고되어 있는 방법중에서 XRD를 이용한 Ohlberg의 방법과 Wakelin등의 방법을 이용하여 코디어라이트 조성의 유리와 α-코디어라이트의 혼합물에 대하여 결정질 양을 측정하였다. Ohlberg의 방법은 한 각도에서 측정하는 경우, 약 4∼5%의 오차를, 4각도에서 측정하여 평균한 경우에는 2∼3%의 오차를 보였으며, Wakelin등의 방법은 실험 양이 많았지만 2∼3%의 오차를 보였다.
박용완,현부성,김태호 한국세라믹학회 1995 한국세라믹학회지 Vol.32 No.7
A porous glass-ceramics body was prepared in the phosphate system. The glass composition of 47.2CaO-22.2TiO2-30.6P2O5 (mol%) containing a few weight percent of ZrO2 was suitable for a mother glass of a porous glass-ceramics. The dense glass-ceramics body was made by a two-step heat treatment of the mother glass. The crystalline phases of the glass-ceramics were $\beta$-Ca3(PO4)2 and CaTi4(PO4)6. The $\beta$-Ca3(PO4)2 phase could be selectively leached out with HCl solution and thus a crystalline $\beta$-Ca3(PO4)2 skeleton was remained. The dimension and shape of the porous glass-ceramics were nearly the same as the those of the first formed glass. The specific surface area and average proe radius of the porous glass-ceramics were 19$m^2$/g and 22 nm, respectively.
Dip-coating법에 의한 ${alpha}-Fe_2O_3$막 제조에 관한 연구
강경원,정용선,현부성,오근호 한국결정성장학회 1998 한국결정성장학회지 Vol.8 No.2
출발원료로 ferric nitrate, ethylene glycol, acethyl acetone 혼합용액을 사용하여 dip-coating된 ${\alpha}-Fe_2O_3$ 막을 제조하였다. coating을 위한 혼합용액의 시간 경과에 따른 용액내의 가교(polymerization) 효과를 관찰하기 위해서 적외선 분광기(FT-IR)를 사용하였고, 막 형성시 유기물 분해 및 결정화 시작온도를 확인하기 위하여 FT-IR, XRD, DSC 등을 이용하여 분석을 행하였다. 또한 AFM과 SEM을 통하여 각 조건에서 제조된 막의 표면상태 및 두께 변화에 대하여 관찰되었다. ${\alpha}-Fe_2O_3$films were prepared by a dip-coating method using the mixed solution of ferric nitrate, ethylene glycol and acethyl acetone. The polymerization effect of the mixed solution was studied by FT-IR spectroscopic analysis, and the decomposition of organic parts and crystallization of the dip-coated film were investigated by FT-IR, XRD and DSC. In addition, AFM and SEM were employed to analyze the surface roughness and the thickness of ${\alpha}-Fe_2O_3$films.