http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
삼차신경통 환자에서 저출력레이저 조사에 따른 전류인지역치의 변화효과
허준영,태일호,고명연,안용우,Heo, Jun-Young,Tae, Il-Ho,Ko, Myung-Yun,Ahn, Yong-Woo 대한안면통증구강내과학회 2008 Journal of Oral Medicine and Pain Vol.33 No.1
The purpose of this study was to examine the effect of LLLT on current perception threshold in trigeminal neuralgia patients. Affected site and non-affected site was irradiated by GaAlAs diode laser. Current perception threshold was evaluated with $Neurometer^{(R)}$ CPT/C before and after LLLT. As an outcomes,CPT were obtained. We made a comparision of these values and the results were as follows. 1. There were no significant difference in CPT between affected site and non-affected site before and after LLLT irradiation. 2. There were no significant difference in CPT between affected site and non-affected site after LLLT irradiation. 3. But, CPT values of $A{\beta}$ fiber incresed slightly on both site after LLLT irradiation
허준영,Heo, Jun-Young 한국인터넷방송통신학회 2011 한국인터넷방송통신학회 논문지 Vol.11 No.6
무선 센서 네트워크는 응용에 따라 실시간 전송, 전송 보장 등의 QoS 요구 사항들을 필요로 한다. 동시에 무선 센서 네트워크의 에너지 제약을 감안한 에너지 효율성도 만족 시켜줘야 한다. 본 논문에서는 이러한 요구 사항들을 만족 시켜줄 수 있는 무선 센서 네트워크를 위한 라우팅 알고리즘을 제안한다. 제안 알고리즘은 주변 노드의 정보만을 바탕으로 싱크 노드까지의 에너지 비용, 지연 시간, 신뢰성을 추정한다. 이 추정을 기반으로 경로를 선택하는 확률을 계산한다. 노드에서 패킷을 전송할 때 계산된 확률에 의해 다음 노드를 선택한다. 선택 확률은 싱크까지의 경로에 소모되는 에너지 비용과 반비례하도록 계산되기 때문에 에너지 비용이 적은 경로일수록 더 자주 선택된다. 실시간 전송을 위해서 제안 알고리즘은 패킷이 제 시간에 싱크까지 갈 수 있는 경로들 중에 선택된다. 신뢰성 있는 전송을 위해서는 노드가 패킷의 소스일 경우 추가 패킷을 다른 경로로 보내도록 할 수 있다. 실험 결과를 통해 제안 알고리즘이 에너지 효율성을 고려하면서 실시간 전송 및 신뢰성 전송을 향상 시킬 수 있음을 알 수 있다. In some applications of wireless sensor networks, requirements such as energy efficiency, real-time, and reliable delivery need to be considered. In this paper, we propose a novel routing algorithm for wireless sensor networks. It provides real-time, reliable delivery of a packet, while considering energy awareness. In the proposed algorithm, a node estimates the energy cost, delay and reliability of a path to the sink node, based only on information from neighboring nodes. Then, it calculates the probability of selecting a path, using the estimates. When packet forwarding is required, it randomly selects the next node. A path with lower energy cost is likely to be selected, because the probability is inversely proportional to the energy cost to the sink node. To achieve real-time delivery, only paths that may deliver a packet in time are selected. To achieve reliability, it may send a redundant packet via an alternate path, but only if it is a source of a packet. Experimental results show that the proposed algorithm is suitable for providing energy efficient, real-time, reliable communications.
움직이는 핀틀 유동 해석을 위한 이동격자 기법과 2차 난류 압축성 모델 연구
허준영(Jun-Young Heo),정준영(Jun-Young Jung),성홍계(Hong-Gye Sung),양준서(June-Seo Yang),이지형(Ji-Hyung Lee) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.11
핀틀의 이동을 고려한 비정상 수치적 해석을 위하여 격자 이동메커니즘을 연구하고, 난류압축성 모델이 핀틀의 박리에 주는 영향을 분석하였다. 비정상 수치해석 기법을 이용하여 핀틀의 위치변화를 고려하였으며, 핀틀의 이동을 모사했을 때에 Fluent에서 사용하는 비정각 격자는 불연속적인 유동이 나타나므로, 본 연구에서는 정각격자의 이동 경계면을 제안하고, 경계면에서의 불연속적인 유동을 제거하였다. 난류모델은 저 레이놀즈 수 k-ε 모델에 압축성 효과(Sarkar 모델)을 적용한 경우와 미적용한 경우에 대하여 계산하였다. 핀틀의 이동을 고려하여 압축성 보정계수 모델에 따른 연소실의 압력변화율과 움직이는 핀틀 노즐내부의 세부 유동구조를 분석하였다. A unsteady numerical analysis including a sliding mesh technique and a turbulent compressible model has been conducted to investigate the movement effect of a pintle, possessing unsteady flow separation in a pintle nozzle. The conformal sliding mesh technique proposed in the study eliminates the flow discontinuity at the moving mesh boundary found by a non-conformal sliding mesh technique used in a commercial software Fluent. Two-equation turbulence models, the low Reynolds k-ε models with or without compressibility corrections proposed by Sarkar are evaluated. The flow structures in the moving pintle nozzle and the pressure change rate in a combustor are analyzed according to the compressibility correction effect.
가변 추력용 핀틀 노즐의 동적 특성에 관한 수치적 연구
허준영(Junyoung Heo),정기연(Kiyeon Jeong),성홍계(Hong-Gye Sung) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
핀틀의 형상과 작동조건에 따른 성능변화와 유동박리특성을 비교하였다. 비정상상태 이동격자 수치해석기법을 이용하여 시간에 따른 핀틀의 위치변화를 고려하였으며, 핀틀의 작동조건에 따른 추력과 연소실 압력변화의 경향성과 박리부근에 대한 분석을 수행하였다. 핀틀의 이동속도는 각각 0.1 m/s, 1.0 m/s이며 작동시퀀스는 핀틀이 노즐 목에 머무르지 않는 경우(case 1), 0.5초 머무를 경우(case 2)를 고려하였다. The pintle nozzle performance and flow separation characteristics are analyzed to the pintle shape and operation conditions. A unsteady numerical technique with moving grid system is applied to take account the pintle movement and flow separation characteristics are estimated to the operation conditions. Pintle speed is 0.1m/s and 1.0m/s respectively. The operation sequences are 1; the pintle moves toward the nozzle throat and instantly turns back and 2; stops at the nozzle throat for 0.5sec.
실상태방정식 및 스월강도에 따른 동축와류형 분사기의 케로신/액체산소 초임계 혼합특성 연구
허준영(Junyoung Heo),김국진(Kukjin Kim),성홍계(Hong-Gye Sung) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
초임계환경에서 작동하는 케로신/액체산소 동축와류형 분사기의 혼합특성을 3차원 수치해석으로 연구하였다. 난류모델은 LES를 기반으로 하였고, 초임계영역의 상태량을 계산하기위해 실제기체 상태방정식 (SRK PR, RK-PR), 점성계수와 열전도도에 대하여 Chung이 제안한 고압상태 혼합물에 대한 방정식, 확산계수에 대하여 Fuller 이론에 Takahashi가 제안한 고압상태의 특징을 고려한 식을 적용하였다. 그리고 분사기의 실기체 상태방정식과 스월 강도에 따른 압력섭동 스펙트럼 밀도를 해석하였다. The turbulent mixing of a kerosene/liquid oxygen coaxial swirl injector under supercritical pressures have been numerically investigated in three dimensional system. Turbulent numerical model is based on LES (Large Eddy Simulation) with real-fluid transport and thermodynamics over the entire pressure range; Real-gas equation of state (SRK, PR, and RK-PR), Chung"s model for viscosity/conductivity, and Fuller"s theorem for diffusivity to take account Takahashi"s compressible effect. The effect of real-gas equation of state and swirl intensity are investigated and power spectral densities of pressure fluctuations in the injector are analyzed.