http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
멀티밴드 레이크 수신기를 적용한 DS-UWB 시스템의 성능분석
최윤성,김수남,강동욱,김기두,Choi Yun-Sung,Kim Su-Nam,Kang Dong-Wook,Kim Ki-Doo 대한전자공학회 2004 電子工學會論文誌-TC (Telecommunications) Vol.41 No.12
본 논문에서는 우수한 잡음 방지 성능과 다른 사용자 간섭에 강건하며, 보안성이 우수한 특징을 갖는 DS-UWB(Direct Sequence-UWB) 방식에 멀티밴드 방식을 적용하였다. 제안된 시스템의 각 서브밴드는 코히어런스 대역폭을 만족하지 못하기 때문에 각 서브밴드에서 레이크 수신기가 사용되었으며 레이크 수신기의 출력은 MRC(Maximum Ratio Combining) 기법을 사용하여 결합하였다. 제안된 시스템은 타 시스템과의 원활한 공존이 가능하며 PBI(Partial Band Interference)에 우수한 성능을 나타낸다. 또한 초광대역 안테나의 부담이 줄게 되며 평균전력 대비 첨두치(peak to average power) 값이 작다는 장점이 있다. 본 논문에서는 AWGN(Additive White Gaussian Noise), 다른 사용자 간섭 및 협대역 잡음이 존재하는 채널에서 멀티밴드 시스템을 적용한 DS-UWB 의 BER 을 수학적으로 분석하였으며, 수신단에서 서브밴드 수가 증가함에 따라 성능이 개선됨을 시뮬레이션을 통하여 입증하였다. In the paper, system is combined multiband system with DS-UWB techniques with properties including low peak-to-average power ratio, robustness to multiuser interference and excellent security. Because each sub-band is not satisfied with coherence bandwidth, rake receiver in each sub-band is applied to the Proposed system receiver. Output of rake receiver is combined by using Maximal Ratio combining technology. In this paper we mathematically analyse the BER of the DS-UWB system with singleband and multiband systems in the narrow interference channel condition and multi user interference channel condition, the simulation results show that proposed scheme is getting robuster with increasing of the number of subbands.
목재수확 방법에 따른 벌채부산물 목재칩의 생산 및 연료 특성
최윤성 ( Yun-sung Choi ),정인선 ( In-seon Jeong ),조민재 ( Min-jae Cho ),문호성 ( Ho-seong Mun ),오재헌 ( Jae-heun Oh ) 한국산림과학회(구 한국임학회) 2021 한국산림과학회지 Vol.110 No.2
본 연구는 목재수확방법에 따른 단목수확시스템과 전목수확시스템으로 구분하여 벌채부산물 수집 및 가공작업의 생산성과 비용을 산출하고, 생산된 목재칩의 연료 특성을 비교 분석하여 목재칩 등급을 분류하고 에너지 시설에 연료 조건이 적합한지를 검토하였다. 벌채부산물 목재칩의 시스템 생산성 및 총 비용은 단목이 1.6 Gwt/SMH, 89,865 won/Gwt이었고, 전목은 2.9 Gwt/SMH, 72,974 won/Gwt로 단목에 비해 목재칩 생산성이 1.3배 높았고, 비용은 18.7% 절감되었다. 벌채부산물 목재칩은 국제표준과 국내기준으로 단목의 목재칩은 등급에 적합하지 않았지만 선별처리를 통해 품질이 A2와 2급으로 향상되었다. 전목은 선별전 목재칩이 국내기준 2급이었으나 국제표준에 적합하지 않았고, 선별처리를 통해 A2 등급으로 향상 되었다. 또한 에너지 시설을 대상으로 Plant A는 단목의 선별전을 제외한 모든 목재칩이 건조처리를 통해 이용가능하였고, 전목 선별전 목재칩이 99,408 won/Gwt으로 가장 비용이 낮았다. 별도의 건조처리가 요구되지 않은 Plant B, C, D는 전목 선별전 목재칩이 57,204 won/Gwt으로 가장 비용이 낮았다. 따라서 벌채부산물을 이용하기 위해 전목수확시스템의 적용과 목재칩 품질 향상을 통해 에너지 이용시설에 적합한 목재칩을 생산할 수 있을 것으로 판단된다. This study calculated the productivity and cost of extraction and processing of logging residues by cut-to-length (CTL) and whole-tree (WT) harvesting methods. In addition, the comparative analysis of the characteristics of wood chip fuel to examine whether it was suitable for the fuel conditions of the energy facility. In the harvesting and processing system to produce the wood chips of logging residues the system productivity and cost of the CTL harvesting system were 1.6 Gwt/SMH and 89,865 won/Gwt, respectively. The productivity and cost of the WT harvesting system were 2.9 Gwt/SMH and 72,974 won/Gwt, respectively. The WT harvesting productivity increased 1.3times while harvesting cost decreased by 18.7% compared to the CTL harvesting system. The logging residues of wood chips were not suitable for CTL wood chips based on International Organization for Standardization (ISO 17225-4:2021) and South Korea standard (NIFoS, 2020), but the quality (A2, Second class) was improved through screening operation. The WT-unscreened wood chips conformed to NIFoS standard (second class) and did not conform to ISO but were improved through screening operation (Second class). In addition to the energy facility in plant A, all wood chips except CTL-unscreened wood chips were available through drying processing. The WT-unscreened wood chips were the lowest at 99,408 won/Gwt. Plants B, C, and D had higher moisture content than plant A, so WT-unscreened wood chips without drying processing were the lowest at 57,204 won/Gwt. Therefore, the production of logging residues should improve with operation methods that improve the quality of wood chips required for applying the variable biomass and energy facility.
삭제된 공인인증서의 복구 및 개인키 암호화 패스워드의 검출
최윤성(Youn-sung Choi),이영교(Young-gyo Lee),이윤호(Yun-ho Lee),박상준(Sang-joon Park),양형규(Hyung-kyu Yang),김승주(Seung-joo Kim),원동호(Dong-ho Won) 한국정보보호학회 2007 정보보호학회논문지 Vol.17 No.1
공인인증서는 온라인 금융거래와 증권거래 등에서 사용자의 신원 확인을 위해 사용된다. 이때 사용자의 공개키는 공인인증서에 저장되며, 이 공개키에 대응되는 사용자의 개인키는 보안을 위해 사용자가 설정하는 패스워드로 암호화되어 개인키 저장 파일에 저장된다. 본 논문에서는 현재 널리 사용되고 있는 공인인증서 관리 소프트웨어에서 정상적으로 삭제된 공인인증서와 개인키 저장 파일이 포렌식 툴을 이용하면 얼마든지 복구가 가능하다는 점을 밝힌다. 그리고 복구된 공인인증서와 개인키 저장 파일을 이용하여 오프라인에서 개인키 암호화 패스워드를 밝혀낼 수 있다는 문제점을 지적하고 그에 따른 대응책을 제시한다. The certificate is used to confirm and prove the user’s identity in online finance and stocks business. A user’s public key is stored in the certificate (for e.g., SignCert.der) and the private key, corresponding to public key, is stored in the private key file (for e.g., SignPri.key) after encryption using the password that he/she created for security. In this paper, we show that the certificate, deleted by the commercial certificate software, can be recovered without limitation using the commercial forensic tools. In addition, we explain the problem that the private key encryption password can be detected using the SignCert.der and the SignPri.key in off-line and propose the countermeasure about the problem.
항공 우주 해상 : 1축 자세제어실험 장비를 이용한 SIMC 기반 쿼드로터 Cascade 제어기 적용에 관한 연구
최윤성 ( Yun-sung Choi ),유영진 ( Young-jin You ),정진석 ( Jin-seok Jeong ),강범수 ( Beom-soo Kang ) 한국항행학회 2015 韓國航行學會論文誌 Vol.19 No.6
본 논문에서는 1축 자세제어실험 장비를 제작하여 쿼드로터 형 무인항공기에 적용할 단일입력-단일출력 Cascade 제어기 실험을 수행하였다. 해당 장비는 두 개의 모터와 프로펠러에 의해 자세변화가 가능한 시소 형태로 구현하였고, 무게 추를 변경하여 회전축을 중심으로 상하 무게중심 이동이 가능하도록 제작하였다. 개발한 장비를 통해 Cascade 구조를 가지는 PID(각도)-PID(각속도) 제어기를 구성하여 실험을 수행하였으며, PID 이득의 조정을 용이하게 하는 SIMC 제어기 이득 조정 기법을 Cascade 제어에 접목하였다. 이를 위해 Matlab-Simulink 환경 하에 2차 시간 지연 모델을 구축하여 시스템 변수 추정을 수행하였다. 기존의 SIMC 조정 기법 적용 과정을 수행하여 그 특성을 파악하고, 적용 과정의 안정성 문제를 고려하여 수정된 방안을 제시하였으며, 이를 1축자세제어실험 장비에 적용하여 기존의 과정과 수정된 과정을 비교 실험하였다. This paper reports the single-input-single-output cascade control by using 1-axis attitude control test-bench for quad-rotor UAV. The test-bench was designed as a see-saw shape using 2 motors and propellers, and to enable changing the center of gravity with the center of gyration using ballast. The experiment was carried out by constructing a PID-PID controller having a cascade structure with the test-bench. The SIMC based PID gain tuning process, which makes PID gain tuning easy, was grafted to cascade control. To graft SIMC method, the system parameter estimation result was conducted with second order time delay model by using Matlab-Simulink. Gain tuning was conducted by simulating with estimated system parameter. In this paper, the conventional application of SIMC was conducted and improved application was proposed for improving stability at tuning process.