http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
RF 스퍼터링으로 증착된 하이드록시아파타이트 박막의 열처리 특성
정찬회,이준희,신윤학,김명한,최석환,김승언,Jung, Chan-Hoi,Lee, Jun-Hee,Shin, Youn-Hak,Kim, Myung-Han,Choi, Sock-Hwan,Kim, Seung-Eon 한국재료학회 2006 한국재료학회지 Vol.16 No.4
RF sputtering process was applied to produce thin hydroxyapatite(HAp) films on Ti-6Al-4V alloy substrates. The effects of different heat treatment conditions on the hardness between HAp thin films and Ti-6Al-4V alloy substrates were studied. Before deposition, the Ti-6Al-4V alloy substrates were heat treated for 1h at $850^{\circ}C\;under\;3.0{\times}10^{-3}torr$, and after deposition, the HAp thin films were heat treated for 1h at $400^{\circ}C,\;600^{\circ}C\;and\;800^{\circ}C$ under the atmosphere, and analyzed FESEM-EDX, FTIR, XRD, nano-indentor, micro-vickers hardness, respectively. Experimental results represented that the surface defects of thin films decreased by relaxation of internal stress and control of substrate structure followed by heat treatment of substrates before the deposition, and the HAp thin films on the heat-treated substrates had higher hardness than none heattreated substrates before the deposition, and the hardness properties of HAp thin films and Ti-6Al-4V alloy substrates appeared independent behavior, and the hardness of HAp thin films decreased by formation of $VTiO_3(OH),\;{\theta}-Al_{0.32}V_2O_5,\;Al_{0.33}V_2O_5$.
배건오(Gunoh Bae),신동훈(Donghoon Shin),배민철(Min-chul Bae),최석환(Sock-hwan Choi) 대한전기학회 2021 대한전기학회 학술대회 논문집 Vol.2021 No.10
이상기후 및 전력소비량의 변화에 따라 전력 수요량은 매년 증가 추세이다. 이에 따라 신규 송전선로의 건설이 필요하며, 시공성 및 경제성 측면에서 가공송전선로가 유리하다. 본 연구에서는 가공송전선 중 저이도-장경간 특성을 갖는 증용량 가공선의 탄소복합소재 인장선에 대한 열화특성을 기계적 방법 및 열적 방법으로 평가하였다. 열화 후 기계적 방법은 3-point bending 기법을 사용하여 평가하였으며, 열 분석은 TGA 및 DMA를 사용하여 인장선의 유리전이온도(Tg) 와 활성화 에너지를 QFW(Ozawa-Flynn-Wall Eqation) Method를 사용하여 평가를 진행하였다. 그 결과 탄소복합소재 인장선의 경우 열분석 방법인 OFW를 사용한 방법보다 기계적 평가 방법에서 더 신뢰성 있는 결과 값을 확인할 수 있었다.
신동훈(Dong-Hoon Shin),김기상(Ki-Sang Kim),최석환(Sock-Hwan Choi),홍동석(Dong-Seok Hong),정용채(Yong-Chae Jung) 대한전기학회 2021 대한전기학회 학술대회 논문집 Vol.2021 No.10
본 논문은 전력케이블 접속함에서 발생 가능한 전기트리의 진전을 억제하기 위해 자가복원 기술을 적용하여 연구한 결과로, 전기트리에 의한 자가복원 캡슐 깨짐 현상을 통해 전기트리 경로에 힐링액이 채워져 전기트리 진전을 억제하는데 목적이 있다. 본 연구를 통해 힐링 효과를 검증하고 자가복원 캡슐이 함유된 절연체의 전기적, 기계적 특성에 대한 연구결과를 기술하고자 한다. 캡슐형태의 이종절연재료가 함유됨에 따라 절연체 고유물성 변화를 발생시킬 가능성에 대한 대비를 위해 기존재료와의 차이를 비교하였고, 실급 시제품을 제작하여 Type test를 진행하였다. 본 논문은 스스로 회복하는 능력을 가지고 있는 재료에 대한 미래지향적인 연구결과로 사료되고 향후 전력설비에 다양하게 적용될 것으로 기대된다.
다결정 실리콘 태양전지의 표면 텍스쳐링 및 반사방지막의 영향
전성욱(Seong-Uk Jun),임경묵(Kyung-Muk Lim),최석환(Sock-Hwan Choi),홍영명(Yung-Myung Hong),조경목(Kyung-Mox Cho) 한국표면공학회 2007 한국표면공학회지 Vol.40 No.3
The effects of texturing and anti-reflection coating on the reflection properties of multi-crystalline silicon solar cell have been investigated. The chemical solutions of alkaline and acidic etching solutions were used for texturing at the surface of multi-crystalline Si wafer. Experiments were performed with various temperature and time conditions in order to determine the optimized etching condition. Alkaline etching solution was found inadequate to the texturing of multi-crystalline Si due to its high reflectance of about 25%. The reflectance of Si wafer texturing with acidic etching solution showed a very low reflectance about 10%, which was attributed to the formation of homogeneous. Also, deposition of ITO anti-reflection coating reduced the reflectance of multi-crystalline si etched with acidic solution(HF+HNO₃) to 2.6%.