http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이온빔의 공정변수에 따른 Cu/Polyimide 박막의 접착력향상에 관한 연구
신윤학,김명한,최재하,Shin Youn-Hak,Kim Myung-Han,Choi Jae-Ha 한국재료학회 2005 한국재료학회지 Vol.15 No.7
In microelectronics packaging, the reliability of the metal/polymer interfaces is an important issue because the adhesion strength between dissimilar materials is often inherently poor. The modification of polymer surfaces by ion beam irradiation and rf plasma is commonly used to enhance the adhesion strength of the interface. T-peel strengths were measured using a Cu/polyimide system under varying $N_2^+$ ion beam irradiation conditions for pretreatment. The measured T-peel strength showed reversed camel back shape regarding the fixed metal-layer thickness, which was quite different from the results of the 90° peel test. The elementary analysis suggests that the variation of the T-peel strength is a combined outcome of the plastic bending work of the metal and polymer strips. The results indicate that the peel strength increases with $N_2^+$ ion beam irradiation energy at the fixed metal-layer thickness.
이온빔에 의한 Cu/Polyimide 표면개질에 따른 접착력향상에 관한 연구
신윤학,추준식,이승우,정찬회,김명한,Shin Youn-Hak,Chu Jun-Sick,Lee Seoung-Woo,Jung Chan-Hoi,Kim Myung-Han 한국재료학회 2005 한국재료학회지 Vol.15 No.1
In microelectronics packaging, the reliability of the metal/polymer interfaces is an important issue because the adhesion strength between dissimilar materials is often inherently poor. The modification of polymer sufaces by ion beam irradiation and rf plasma are commonly used to enhance the adhesion strength of the interface. T-peel strengths were measured using a Cu/polyimide system under varying $Ar^+$ ion beam irradiation pretreatment conditions. The measured T-peel strength showed reversed camel back shape regarding the fixed metal-layer thickness, which was quite different from the results of the $90^{\circ}$ peel test. The elementary analysis suggests that the variation of the T-peel strength is a combined outcome of the plastic bending work of the metal and polymer strips. The results indicate that the peel strength increases with $Ar^+$ ion beam irradiation energy at the fixed metal-layer thickness.
Mo:Na 두께에 따른 Cu(In,Ga)Se<sub>2</sub> 박막의 물성과 효율변화
신윤학,김명한,Shin, Younhak,Kim, Myunghan 한국재료학회 2014 한국재료학회지 Vol.24 No.3
To realize high-performance thin film solar cells, we prepared CIGS by the co-evaporation technique on both sodalime and Corning glass substrates. The structural and efficient properties were investigated by varying the thickness of the Mo:Na layer, where the total thickness of the back contact was fixed at 1${\mu}m$. As a result, when the Mo:Na thickness was 300 nm on soda-lime glass, the measured Na content was 0.28 %, the surface morphology was a plate-like compact structure, and the crystallinity by XRD showed a strong peak of (112) preferential orientation together with relatively intense (220) and (204) peaks as the secondary phases influenced crystal formation. In addition, the substrates on soda-lime glass effected the lowest surface roughness of 2.76 nm and the highest carrier density and short circuit current. Through the optimization of the Mo:Na layer, a solar conversion efficiency of 11.34% was achieved. When using the Corning glass, a rather low conversion efficiency of 9.59% was obtained. To determine the effects of the concentration of sodium and in order to develop a highefficiency solar cells, a very small amount of sodium was added to the soda lime glass substrate.
Mo : Na/Mo 이중층 구조 두께에 따른 태양전지 후면전극의 조직 및 전기적 특성
신윤학,김명한,Shin, Younhak,Kim, Myunghan 한국재료학회 2013 한국재료학회지 Vol.23 No.9
Mo-based thin films are frequently used as back electrode materials because of their low resistivity and high crystallinity in CIGS chalcopyrite solar cells. Mo:Na/Mo bilayer thin films with $1{\mu}m$ thickness were deposited on soda lime glass by varying the thickness of each layer using dc-magnetron sputtering. The effects of the Mo:Na layer on morphology and electrical property in terms of resistivity were systematically investigated. The resistivity increased from $159{\mu}{\Omega}cm$ to $944{\mu}{\Omega}cm$; this seemed to be caused by increased surface defects and low crystallinity as the thickness of Mo:Na layer increased from 100 nm to 500 nm. The surface morphologies of the Mo thin films changed from a somewhat coarse fibrous structures to irregular and fine celled structures with increased surface cracks along the cell boundaries as the thickness of Mo:Na layer increased. Na contents varied drastically from 0.03 % to 0.52 % according to the variation of Mo:Na layer thickness. The change in Na content may be ascribed to changes in surface morphology and crystallinity of the thin films.
Mo:Na두께에 따른 Cu(In,Ga)Se<sub>2</sub> 태양전지 박막의 효율 특성
신윤학,김명한,Shin, Younhak,Kim, Myunghan 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.9
We have focused on the conversion efficiency of CIGS thin film solar cell prepared by co-evaporation method as well as the optimization of process condition. The total thickness of back electrode was fixed at 1 ${\mu}m$ and the structural, electric and optical properties of CIGS thin film were investigated by varying the thickness of Mo:Na bottom layer from 0 to 500 nm. From the experimental results, the content of Na was appeared as 0.28 atomic percent when the thickness of Mo:Na layer was 300 nm with compactly densified plate-shape surface morphology. From the XRD measurements, (112) plane was the strongest preferential orientation together with secondary (220) and (204) planes affecting to the crystallization. The lowest roughness and resistivity were 2.67 nm and 3.9 ${\Omega}{\cdot}cm$, respectively. In addition, very high carrier density and hole mobility were recorded. From the optimization of Mo:Na layer, we have achieved the conversion efficiency of 9.59 percent.
RF 스퍼터링으로 증착된 하이드록시아파타이트 박막의 열처리 특성
정찬회,이준희,신윤학,김명한,최석환,김승언,Jung, Chan-Hoi,Lee, Jun-Hee,Shin, Youn-Hak,Kim, Myung-Han,Choi, Sock-Hwan,Kim, Seung-Eon 한국재료학회 2006 한국재료학회지 Vol.16 No.4
RF sputtering process was applied to produce thin hydroxyapatite(HAp) films on Ti-6Al-4V alloy substrates. The effects of different heat treatment conditions on the hardness between HAp thin films and Ti-6Al-4V alloy substrates were studied. Before deposition, the Ti-6Al-4V alloy substrates were heat treated for 1h at $850^{\circ}C\;under\;3.0{\times}10^{-3}torr$, and after deposition, the HAp thin films were heat treated for 1h at $400^{\circ}C,\;600^{\circ}C\;and\;800^{\circ}C$ under the atmosphere, and analyzed FESEM-EDX, FTIR, XRD, nano-indentor, micro-vickers hardness, respectively. Experimental results represented that the surface defects of thin films decreased by relaxation of internal stress and control of substrate structure followed by heat treatment of substrates before the deposition, and the HAp thin films on the heat-treated substrates had higher hardness than none heattreated substrates before the deposition, and the hardness properties of HAp thin films and Ti-6Al-4V alloy substrates appeared independent behavior, and the hardness of HAp thin films decreased by formation of $VTiO_3(OH),\;{\theta}-Al_{0.32}V_2O_5,\;Al_{0.33}V_2O_5$.
경미한 흉부 손상에서의 늑골 골절 진단: 같은 날 연속 시행한 단순촬영과 초음파의 비교
조용수,백창희,이경래,신윤학,황영섭,정구영,정수현,황철목 대한영상의학회 2007 대한영상의학회지 Vol.56 No.4
목적: 경미한 흉부 손상으로 늑골 골절이 의심된 환자에서 같은 날 연속 시행한 단순촬영과 초음파검사가 늑골 골절을 얼마나 발견하는지 그 차이를 비교해보고자 하였다. 대상과 방법: 경미한 흉부 손상을 받고 2주가 지나지 않은 내원 환자 중 늑골 골절이 의심되어 흉부 단순 촬영과 초음파를 같은 날 연속적으로 시행 한 215명을 대상으로 하였다. 모든 환자에서 흉통이 유일한 증상이었다. 단순 흉부 촬영과 초음파는 거의 같은 시기에 시행되었으며 두명의 영상의학과 전문의가 5-9 MHz의 선상 탐촉자를 사용하여 초음파를 시행하였다. 초음파에서 늑골, 늑연골, 늑연골접합부의 앞쪽 변연에 파괴가 있을 때 골절이라고 하였다. 골절의 위치, 개수와 골절의 합병증 유무를 기술하였으며 그 진단율을 초음파와 단순촬영에서 비교하였다. 결과: 215명 중 단순촬영만으로 50명(23%)에서 70개의 골절을 발견하였고 초음파로는 133명(62%)에서 203개의 골절을 발견하였다. 초음파에서 83명에게서 133개의 새로운 골절을 찾아내었다. 초음파가 단순촬영에 비해 2.6배 골절환자를 더 발견하였고 골절된 늑골의 수로는 2.9배 더 발견하였다. 초음파로 진단된 203개의 골절 중 늑골 자체는 201개이고 늑연골은 1개, 늑연골접합부는 1개였다. 단순촬영과 초음파에서 늑골 골절 외의 합병증은 없었다. 결론: 경미한 흉부 손상을 입은 환자에서 단순촬영에 이어 같은 날 연속 시행한 초음파에서 늑골골절의 발견율이 더 높았다. Purpose: We wished to compare the ability of ultrasonography and radiography performed on the same day to detect rib fractures in minor chest injuries. Materials and Methods: Two hundred and fifteen patients with minor chest injuries were selected. Radiography and ultrasonography were performed on the same day with these patients. Chest wall pain was the only presenting symptom. Two radiologists performed ultrasonography. Fractures were identified by a disruption of the anterior margin of the rib and costal cartilage. The incidence and location of fractures and complications revealed by radiography and ultrasonography were compared. Results: Radiographs revealed the presence of 70 rib fractures in 50 (23%) of 215 patients and ultrasonography revealed the presence of 203 rib fractures in 133 (62%) of 215 patients. Ultrasonography uniquely identified 133 rib fractures in 83 patients. Ultrasonography identified a 2.9 fold increase in the number of fractures in a 2.6 fold number of subjects as compared to radiography. Of the 203 sonographically detected fractures, 201 were located in the rib, one was located at the costochondral junction, and one in the costal cartilage. There were no complications seen by either radiography or ultrasonography. Conclusion: Ultrasonography reveals more fractures than those that may be overlooked on radiography for minor chest injuries.
수부 건초에서 발생한 거대 세포종 (단발성 및 다발성 거대 세포종의 비교)
이승구,강용구,박원종,양성철,신윤학,Rhee, Seung-Koo,Kang, Yong-Koo,Bahk, Won-Jong,Yang, Sung-Chul,Shin, Yun-Hack 대한근골격종양학회 2003 대한골관절종양학회지 Vol.9 No.1
목적: 건초에서 발생하는 거대 세포종(황색종)은 수부에서 발생하는 양성 연부조직 종양중 낭종 다음으로 흔하며, 수술 절제후, 간혹 재발 되기도 한다. 대부분 단발성으로 발생하나 가족성 고콜레스테롤혈증 환자에서는 다발성이며 대칭적 발생을 보인다. 저자들은 수부 건초에서 발생한 거대세포종의 임상적 특성과 수술 절제후 장기 추적 결과를 분석하였고, 특히 단발성 및 다발성 거대세포종 환자의 특성을 비교하였다. 대상 및 방법: 1995년부터 2002년까지 만 8년간 본 병원에서 수술 가료후 건초의 거대세포 종으로 확진된 총 21예(다발성 3예 포함)를 대상으로 임상 및 X-선상 분석을 하였으며, 수술 절제후 평균 16개월(3~46개월) 추적하여 재발여부 및 단발성과 다발성 거대세포종의 임상 과정을 비교 하였다. 결과: 총 21예중 14예(66.7%)가 여자였으며 40대에서 16예(76.2%)로 빈발하였고 평균 연령은 47세(19~68세)였다. 단발성 거대세포종 18예중 수지별 발생은 인지와 환지가 각4예씩, 소지(3예), 중지(2예) 및 모지(1예)의 순이었고, 수장부의 발생이 4예였다. 원위 및 중위 지골 부위가 9예(50%), 근위 지골 부위가 4예, 중수지골 및 중수지절 부위가 2예였다. 신전건(7예)보다 굴곡건(11예) 건초 이환이 더 많았고(양측 건이환 3예), 증상 발현에서 수술까지의 지연은 평균 14개월(3~48개월)이였다. 다발성 거대세포종 3예중 1예는 인지와 중지의 중위지골 부위에 발생하였고, 2예는 고콜레스테롤혈증을 동반한 20대 남자들에서 대칭적 거대세포종이 수부를 포함하여 22곳 및 12곳등 다발적 이환을 보였고, 외형상의 돌출로 보기 흉하거나 기능 제한을 초래하는 부위만 선택적으로 아전절제하였다. X-선상 연부조직 음영 증가외 4예에서 종괴의 압박에 따른 피질골 미란과 파열소견을 보였다. 수술시 3예에서 수지 신전건과 굴곡건의 양측 건초를 모두 침범하는 넓고 큰 다엽상 소견을 보였으며, 평균 16개월 추적중, 총 18예중 3예에서 재발(16.7%)하였다. 이들 재발예는 단발성 거대세포종중 굴곡건과 신전건 건초를 광범위하게 다엽상 이환을 하였거나 술전 X-선상 골피질의 파열이나 골미란등이 있어 불완전 절제를 시행한 경우들이었으며, 재 광범위 절제 하였고 추적 관찰 중이다. 단발성 및 다발성 거대세포종은 종괴의 병리 조직학상 유사함을 제외하면, 발생 기전이나 침범 부위와 정도, 동반 질환은 물론 치료와 예후에도 차이가 많아 서로 다른 질환으로 판단된다. 결론: 수부의 건초에서 발생하는 거대세포종(황색종)은 드물지 않은 종양으로 완전 절제가 필수적이며, 특히 가족성 고콜레스테롤혈증 환자에서는 다발성 건 황색종을 동반 할수 있어 치료에 유의해야 한다. Purpose: To analyse their end results and also to differentiate the single or multiple giant cell tumor(GCT) of tendon sheath in hand. Materials & Methods: Total 21 cases with GCT of tendon sheath in hand were treated surgically and analyzed their end results with clinically, radiologically and pathologically to allowed for average 16 months after surgical excision. Results: The finger flexor tendons, especially on index and ring finger, involving distal interphalangeal joint and mid-phalanges in fourth decades (average age of 47 years old) were frequently involved, and the mass was not exceed than 2 cm in size, fixed on tendon sheath with rubbery hard tenderness but rare bony involvements except 4 cases of bony erosion and cortical perforation. The three cases with multiple GCT of hand was also combined with familial hypercholesterolemia, and are commonly involved the extensor tendons as well as achilles tendons bilaterally, treated with partial excision because of multiplicity. Average 16 months after surgical excision for single GCT cases was followed and showed the recurrence in 3 cases(3/18,16.7%), treated with wide excision. The single and multifocal GCT are similar in pathologic changes but different soft tissue tumors in their pathogenesis, treatment and prognosis. Conclusion: Incomplete excision of GCT of tendon sheath in hand are thought to be the cause of recurrence, especially in cases with incomplete lesional excision, in multilobular and bony involvement etc. So careful wide excision is necessary to prevent the recurrence.
전방 도달법과 수장부 T자형 금속판 고정을 통한 원위 요골 골절의 치료
최우성,김원유,최동원,신윤학,김진영 대한골절학회 2003 대한골절학회지 Vol.16 No.2
목적 : 원위 요골 골절에 대해 전방 도달법을 이용한 관혈적 정복 및 수장부 T자형 금속판 내고정술의 방사선학적 및 임상적 결과를 분석하여 문헌 고찰과 함께 보고하고자 한다. 대상 및 방법 : 도수 정복이 되지 않았거나, 심한 분쇄 골절로 인해 도수 정복 상태가 유지되지 못했거나, 부적절한 관절면의 정복 등의 이유로 원위 전완부 전방 도달법을 이용한 관혈적 정복 및 수장부 T자형 금속판을 이용한 내고정술을 시행 후 최소 1년 이상 추시 관찰이 가능하였던 19예를 대상으로, 수술 전 후의 방사선학적인 평가와 최종 추시시의 기능적 평가를 Green과 O'Brein의 방법을 이용하여 평가하였다. 결과 : 수술 직후 모든 예에서 관절면의 해부학적 정복을 얻을 수 있었다. 방사선학적 결과에서 요골 관절면의 요골 길이는 수술 전 평균 8.8 ㎜ (±4.8 ㎜)에서 수술 후11 ㎜ (±3 ㎜)로, 요골 경사각은 평균 15˚ (±5.7˚)에서 20˚ (±5˚)로, 전방 경사는 평균 -11˚ (±13˚)에서 7˚ (±4˚)로, 척골 양성 변이는 평균 4 ㎜ (±3 ㎜)에서 0 ㎜ (±1 ㎜)로 향상되었으며, 기능적 결과에 있어서는 우수 9예, 양호 7예, 보통 2예, 불량 1예 이었다. 추시 중 초기 수상이 심하였던 1 예에서는 정복의 소실과 함께 장 무지 굴건의 파열이 초래하였다. 결론 : 원위 요골 골절의 수술적 치료에서 일부 제한된 범위에서만 적응증이 되었던 수장부 금속판 내고정술로 방사선학적 측면과 기능적인 측면에서도 만족할 만한 결과를 얻었으며, 초기 분쇄 골절이 심할 경우에는 정복의 소실을 예방하기 위하여 외고정기를 부수적으로 장착하는 것이 좋을 것으로 생각된다. Purpose : To analyze the radiologic and clinical results of open reduction and volar plating through anterior approach for distal radius fracture. Materials and Methods : We retrospectively analysed that 19 distal radius fracture, which would not be reduced by closed reduction or too comminuted to maintain reduction or articular surface incongruency, were treated by open reduction and volar plating through anterior approach. The results were evaluated by preoperative and immediate postoperative radiographics and clinical results were analysed using Green and O'Brien scoring system at final follow up. Results : All cases achieved anatomical articular surface reduction postoperatively. In terms of radiologic analysis, mean radial length (8.8 ㎜±4.8 ㎜ vs. 11 ㎜±3 ㎜), radial inclination (15˚±5.7˚ vs. 20˚±5˚), volar tilt (-11˚±13˚ vs. 7˚±4˚) and ulnar plus variant (4 ㎜±3 ㎜ vs. 0 ㎜±1 ㎜) were improved. The clinical evaluation revealed 9 excellent cases, 7 good cases, 2 fair cases and I poor case. The reduction loss and flexor pollicis longus rupture was occurred in one patient, who had severely displaced comminute fracture in initial injury. Conclusion : Using volar plating, authors gain good radiologic and clinical results. But, additional external fixation is recommended to prevent further collapse in severly comminuted fractures.