http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Di-nitro-diaza-alkane 계열 에너지 가소제를 활용한 온도 둔감 추진제 특성 연구(I)
주현혜(Hyunhye Joo),주형욱(hyung-uk Joo),권태수(Tae Soo Kwon),권순길(Sun-kil Kwon) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.11
근래 추진제의 개발 동향은 온도 둔감 특성을 가지는 것을 목표로 온도에 둔감한 특성을 가진 DNDA-57을 활용한 개발이 이루어지고 있다. 이번 연구에서는 DNDA-57이 포함된 추진제에 대해 Closed Bomb Test 및 40MM 발사시험을 통해 온도 둔감 효과를 확인하였다. 현재 최적의 추진제 형상 및 조성, 그리고 작업 공정에 대한 연구가 진행 중이다. 향후 최적의 조성 및 공정을 수립하기 위한 연구를 지속적으로 수행할 계획이다. Over recent several years, researches for the less sensitive gun propellant development have been carried out with promising the product of propellants which have temperature independent characteristics using the new energetic plasticizing mixture as Di-nitro-diaza-alkanes. During this study, the promising propellant formulation having temperature ballistic properties as well as better behaviors concerning the cold brittleness of the materials was confirmed by results in tests of a closed bomb and 40mm Gun firing. On-going research on the optimized shape, formulation and processes of the propellant is progressing. From now on it should be done present study to establish the better composition and processes.
주현혜(Hyunhye Joo),주형욱(Hyunguk Joo),권태수(Taesoo Kwon),권순길(Sunkil Kwon) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.12
K11은 5.56×45Nato 탄과 20 mm 공중폭발탄을 혼용할 수 있는 분대지원화기로 하나의 방아쇠로 두 탄약을 모두 발사시킬 수 있다. K11은 고정포가 아닌 소총이기 때문에 소지하고 이동하며 사격하므로 탄이 발사되면서 발생하는 압력을 사격수가 감당해야한다. 따라서 탄이 발사되면서 발생하는 압력은 같은 속도를 내면서도 낮으면 효과적이다. 이에 따라 제한된 조건에서 20 mm 공중폭발탄 추진시스템의 개량 가능성을 검토하였다. A K11 rifle can use two ammunitions of 5.56×45Nato and 20mm Air Burster munitions by one trigger. Because the Pressure generated by the shot is loaded on the solider. the lower pressure at same velocity is preferred. We studied the way how to improve the propulsion system of air burster munition for K11 rifle at limited condition.
알루미늄클로라이드 촉매를 이용한 Tricyclopentadiene 유도체의 이성화 반응 연구(I)
주현혜(Hyunhye Joo),주형욱(Hyeong Uk Joo),박창선(Chang-Sun Park),한정식(Jeong-Sik Han) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.11
Tetrahydrotricyclopentadiene(이하 THTCPD)의 이성질체는 높은 밀도와 높은 발열량을 가지고 있어 고성능 액체 연료의 주요성분으로 활용이 가능하다. 본 연구에서는 상온에서 고체상태로 유동성이 좋지 않은 THTCPD를 흐름성이 우수한 액체상태 특성을 가질 수 있게 할 수 있는 최적의 반응조건을 찾는 것이다. THTCPD의 이성화 반응은 반응온도 변화와 반응용매의 영향 등의 다양한 반응조건을 통해 살펴보았다. 알루미늄클로라이드 촉매를 사용하여 실험한 결과 사용한 반응용매 중 Dichloromethane(Methylene Chloride: MC), 1,2-Dichloroethane(Ethylene Chloride: EC), Chloroform이 n-Hexane, Toluene보다 이성화 반응에서 우수한 특성을 나타내었으며, 반응온도도 이성화반응에 영향을 크게 미치는 것을 알 수 있었다. Tetrahydrotricyclopentadiene(below THTCPD) isomer is a good candidate for the high performance liquid fuel component because of high density and heat of combustion value. But it has bad fluidity. The object of this study was to find out the optimal reaction condition to improve the fluidity of THTCPD because initial reactant is solid state, So we have carried out isomerization reactions using aluminum chloride catalyst under varying the reaction condition such as reaction temperature and reaction solvents. The results showed that when using aluminum chloride catalyst, isomerization reaction was more active in dichloromethane(methylene chloride: MC), 1,2-dichloroethane(ethylene chloride: EC) and chloroform than n-hexnae and toluene and was effected by reaction temperature.
장정은(Jungeun Jang),주형욱(Hyeong Uk Joo),오민석(Minseok Oh),주현혜(Hyunhye Joo),권태수(Tae Soo Kwon) 한국추진공학회 2014 한국추진공학회 학술대회논문집 Vol.2014 No.12
방호성능이 향상된 전차에 대응하기 위해서는 관통성능이 증강된 운동에너지탄의 필요성이 대두되고 있다. 본 연구에서는 추진제의 주원료인 NG(Nitroglycerine)등 고에너지 가소제에 의한 포신마모를 최소화하고 에너지 손실 및 속도감소를 최소화하기 위해 둔감제 등을 투입하여 에너지를 극대화 하였다. 그리고 표면에 온도둔감특성을 가지는 코팅을 수행하여 추진제의 연소속도가 온도에 크게 의존하지 않게 하여 상온에서 최대 평균압력을 사용할 수 있도록 하였다. 온도둔감 특성은 Closed Bomb Test, 40미리 고중량탄을 적용한 Simulator Gun 시험 및 신형 105mm 날개안정철갑 시험을 통하여 확인하였다. In order to develope with the improved performance protection tank, it is necessary to develop penetration enhanced kinetic energy ammunition. In this study, to minimize barrel abrasion due to the high-energy plasticizer such as NG, the main ingredient of propellant, and to minimize energy loss and reduced speed, the insensitive components were added to maximize the energy. And by performing the propellent surface coating, so as to have a temperature independent characteristics without burning rate of the propellant is dependent on the temperature, and to use the maximum average pressure at room temperature. Surface coated propellants were confirmed by results in tests of a closed bomb test, 40mm Simulator Gun firing and 105mm armor piercing fin stabilized discarding sabot firing test.