http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정중은 ( Joong-eun Jung ),김주연 ( Ju-youn Kim ),배혜수 ( Hye-su Bae ),김호준 ( Ho-joon Kim ) 한국정보처리학회 2013 한국정보처리학회 학술대회논문집 Vol.20 No.2
본 연구에서는 의료 진단키트의 자동판독 시스템에서, 통제되지 않은 조명 환경에서도 정확한 색상 판별을 위한 ROI 영역 추출 기법과 조명 보정 기법을 고찰한다. 3 단계로 세분된 ROI 추출 과정은 조명변화에 적응적인 배경영상 정보를 유지하고, 노이즈 제거와 에지 추출 과정을 포함한다. 진단 결과의 정량적 판별에 중요 지표가 되는 색상정보가 조명의 영향의 의해 왜곡되는 것을 보완하기 위하여 표본 추출된 학습데이터로부터 조명 보정 곡선을 생성한다. 20 종류의 색상패턴을 대상으로 적용한 실험 결과를 통하여 제안된 이론의 유용성을 고찰한다.
Hastelloy X 주조재의 열간 노출에 따른 미세조직 및 인장 특성 변화
최백규,김인수,도정현,정중은,정인용,홍현욱,조창용,Choi, Baig Gyu,Kim, In Soo,Do, Jeonghyeon,Jung, Joong Eun,Jung, In Yong,Hong, Hyun Uk,Jo, Chang Yong 한국주조공학회 2017 한국주조공학회지 Vol.37 No.5
Microstructural evolution of cast Hastelloy X during thermal exposure has been investigated. OM, SEM, and TEM microscopy were carried out on the as-cast, the standard heat treated, and the thermally exposed conditions. Tensile tests were also conducted to understand the effect of microstructural evolution on the degradation of tensile properties. Coarse $M_6C$ and fine $M_{23}C_6$ carbides were found in as-cast Hastelloy X with fine carbides on sub-boundary. Some of $M_{23}C_6$ carbide dissolved into the matrix during solution heat treatment and dislocation network formed at the interface between the carbide and the matrix due to the misfit strain. There was no significant microstructural difference between the exposed specimens at $400^{\circ}C$ and the solution heat treated specimen. A large amount of $M_{23}C_6$ carbides precipitated along and near grain boundaries and sub-boundaries after exposure at $650^{\circ}C$. Exposure at $870^{\circ}C$ of the alloy caused precipitation of $M_6C$ and ${\mu}$. The strength increased and the elongation decreased by thermal exposure at $650^{\circ}C$ and $870^{\circ}C$ because carbides interfere with the movement of the dislocation. It was found that the precipitation of carbide gave significant effects on the tensile properties of Hastelloy X.
멀티미디어 처리 : 조영증강 초음파영상에서 밀도변화 데이터를 이용한 진단 파라미터 추출 기법
이준용 ( Jun Yong Lee ),정중은 ( Joong Eun Jung ),김호준 ( Ho Joon Kim ) 한국정보처리학회 2015 정보처리학회논문지. 소프트웨어 및 데이터 공학 Vol.4 No.7
의료 진단 초음파영상에서 조영제의 전이시간과 확산패턴의 형태는 질환 및 병변을 분석하는 중요한 파라미터로 고려된다. 조영증강 초음파영상 분석과 관련한 기존의 대부분의 연구에서 대상 영역의 평균 명도 변화곡선을 기반으로 파라미터값을 추출한다. 그런데 이러한 명도 데이터는 조영제의 마이크로 버블 효과로 인하여 그 값이 왜곡될 수 있다. 이에 본 논문에서는 조영증강 초음파 진단 파라미터의 추출과정에서 그 정확도를 개선하기 위하여 명도값의 변화뿐만 아니라, 조영제의 영향을 반영하는 픽셀에 대한 밀도 정보를 보완적으로 활용하는 방법을 제안한다. 제안된 기법은 간 질환 진단 과정에서 병변의 윤곽선 추출과 병변의 특성분석을 위하여 조영제의 확산시점과 속도를 보다 정확하게 판별할 수 있게 한다. 실제 임상 데이터를 사용한 실험결과를 통하여, 제안된 방법이 파라미터 영상 생성기법에서 개선된 결과를 생성할 수 있음을 보인다. In medical ultrasonography, transit time and contrast enhancement patterns are considered as important parameters to analyze liver diseases. In many recent researches, time-intensity curves(TIC) have been used for calculating the transit time of the contrast agents. However, the intensity curve may include the variations which are caused by the micro-bubble effect of contrast agents. In this paper, we propose a complementary approach to diagnostic parameter extraction which utilizes a density information as well as the intensity data. The proposed technique improves the accuracy in extraction of the transit time and velocity of contrast agents for detection and characterization of focal liver lesions. Through the experiments using a set of clinical data, we show that the proposed methods can improve the reliability of the parametric image data.
이준용 ( Jun-yong Lee ),정중은 ( Joong-eun Jung ),김호준 ( Ho-joon Kim ) 한국정보처리학회 2015 한국정보처리학회 학술대회논문집 Vol.22 No.1
본 연구에서는 조영증강 초음파 진단에서 혈류의 패턴을 효과적으로 판단할 수 있게 하기 위하여 조영제의 확산패턴을 영상으로 표현하는 방법론을 제안한다. 초음파 영상에서 조영제의 전이 시 간에 대한 파라미터의 가시화 기법과, 단계별 전이패턴을 단일 영상으로 표현하는 방법을 제시함으로써, 병변의 진단 및 분석과정에서 대상 영역 내 혈류의 형태와 속도를 효과적으로 판별할 수 있게 한다. 분석과정의 필요에 따라 영상에서 정밀도를 선택적으로 적용할 수 있도록 하였으며, 노이즈 제거를 위한 필터링 과정과 단계별 전이 시점의 위치에 대한 영역 분할 과정을 거쳐 영상 생성 결과를 개선할 수 있도록 하였다.
일방향 응고 니켈기 초내열 합금 CM247LC의 온도에 따른 크리프 특성
최백규 ( Baig-gyu Choi ),도정현 ( Jeonghyeon Do ),정중은 ( Joong Eun Jung ),석우영 ( Woo-young Seok ),이유화 ( Yu-hwa Lee ),김인수 ( In Soo Kim ) 한국주조공학회 2021 한국주조공학회지 Vol.41 No.6
일방향응고로 제조된 니켈기 초내열합금 CM247LC의 다양한 온도 및 응력조건에서 크리프 특성에 대해 고찰하였다. 열처리 후 일부 공정조직이 남아 있었으며 비교적 균일한 육면체의 γ'이 수지상 내부와 수지상간 영역에서 관찰되었다. 상대적 저온인 750℃의 고응력 크리프 영역에서는 1차 크리프 동안 많은 변형이 발생하였으나 고온으로 갈수록 3차 크리프 구간이 크리프 변형시간의 대부분을 차지함을 알 수 있었다. 저온 고응력에서는 부분 전위가 γ'으로 진입하며 적층결함을 γ'내에 생성시켰으며 초기 크리프변형속도가 증가하는 부분이 있었으나 850℃ 이상의 온도에서는 γ' 내부에서 적층결함이 관찰되지 않았으며 이는 적층결함에너지의 온도의존성 때문인 것으로 판단된다. 고온이어서 확산속도가 빠른 950℃와 1000℃에서는 γ'의 래프팅이 관찰되었다. 온도가 좀 더 낮은 850℃에서는 변형기구가 응력에 따라 다르게 나타나서 상대적으로 크리프 시간이 긴 저응력에서만 래프팅이 관찰되었다. Creep properties of directionally solidified Ni-based superalloy CM247LC under various temperature and stress conditions have been investigated. In the heat-treated specimen, some portion of eutectic γ-γ' remained, and uniform cubic γ' was observed in the dendrites. At low temperature (750℃) and high stress condition, a large amount of deformation occurred during the primary creep, while the tertiary creep region accounted for most of the creep deformation under high temperature and low stress condition. γ' particles are sheared by dislocation dissociated into super lattice partial dislocations separated by stacking faults at 750℃. No stacking faults in γ' were found at and above 850℃ due to the temperature dependence of the stacking fault energy. Raft structure of γ' was found after creep test at high temperature of 950℃ and 1000℃. At 850℃, the deformation mechanism was shown to be dependent on the stress condition, and so rafting was observed only under low stress condition.
니켈기 초내열합금의 열간노출에 따른 미세조직 및 기계적 특성 변화
김인수 ( In-soo Kim ),최백규 ( Baig-gyu Choi ),정중은 ( Joong-eun Jung ),도정현 ( Jeong-hyeon Do ),정인용 ( In-yong Jung ),조창용 ( Chang-yong Jo ) 한국주조공학회 2016 한국주조공학회지 Vol.36 No.5
The microstructural evolution of a cast Ni base superalloy, IN738LC, has been investigated after long term exposure at several temperatures. Most of the fine secondary γ` particles resolved after 2000 hour exposure at 816℃. At higher temperatures of 871℃ and 927℃, secondary γ` resolved after 1000 hours of exposure, and cuboidal primary γ` grew with exposure time. During the ther-mal exposure, σ phase formed at all tested temperatures, and η phase was observed around interdendritic regions due to carbide degeneration. The influence of microstructural evolution during thermal exposure on the mechanical properties has been analyzed. The effects of γ` particle growth are more pronounced on the high temperature creep properties than on the room temperature tensile properties.
니켈기 초내열 합금 GTD 111에서 편석에 의한 합금원소 분포 및 미세조직 변화
최백규 ( Baig Gyu Choi ),김인수 ( In Soo Kim ),도정현 ( Jeong Hyeon Do ),정중은 ( Joong Eun Jung ),조창용 ( Chang Yong Jo ) 한국주조공학회 2015 한국주조공학회지 Vol.35 No.6
Segregation during solidification and homogenization during thermal exposure in GTD 111 were investigated. The microstructures of as-cast, standard heat-treated, and thermally exposed specimens were observed by SEM. A compositional analysis of each specimen was conducted by EDS. The dendrite core was enriched in W and Co, though lower levels of Ti and Ta were observed. An unexpected phase, in this case like the η phase, was observed due to segregation near the γ-γ`` eutectic in the standard heat-treated specimen. Segregation also induced microstructural evolution near the γ-γ`` eutectic during the standard heat treatment. A quantitative analysis and microstructural observations showed that the thermal exposure at a high temperature enhanced the chemical homogeneity of the alloy.