서울시 신축한옥의 면적별 평면구성에 따른 공간적 특징에 관한 연구

정준수,양승정,김수암,Chung, Joon-Soo,Yang, Seung-Jung,Kim, Soo-Am 한국주거학회 2013 한국주거학회 논문집 Vol.24 No.6

According to the relation of the attribution of residents, we analyzed the spatial characteristics of newly-built Hanok in Bukchon focused on a spatial area-ratio, the number of rooms, L/D/K configuration. The results are as follows: 1) Have increased the number of residents, the family members are also increased. In this study, the major formed case is 3 residents and two-generation family. 2) In the most cases, R area-ratio is the highest, next to L/D/K integrated area-ratio. While the examples that the L/D/K integrated area-ratio is lower than R area-ratio, or is also higher than R area-ratio are appeared. These examples can present that it has a tendency to secure the necessary room depending on the attribution of residents. 3) L/D/K is classified into four types of connection. And the characteristics depending on the number of rooms are as follows. L+DK is the most common type, next to LDK>LD+K>L+D+K. And L+DK is widely distributed in each sized area. And particularly, it is appeared mostly in 3R.

장수명주택 해외진출을 위한 대상국가의 외부환경분석

정준수(Chung, Joonsoo),이보라(Lee, Bora) 한국주거학회 2015 한국주거학회 논문집 Vol.26 No.5

Currently, the Korean construction industry is shifting its interest to the overseas construction market because of a stagnating domestic market. In the meantime, the international housing construction market is expanding with respect to new city development projects that are supported by population growth and urban migration. Despite the Korean construction industry's expertise in new city development, technology, and systems for apartment supply, the share of Korean players in the international housing construction market is continuously decreasing. As a measure to overcome this situation, the authors of this study considered the paper The Development of a Cost Effective, Long-life Housing Model and Construction of Testbed, which is currently in progress as a part of national project. Through literature review and interviews with experts, the authors determined that there are column+minimum interior (infill) apartments that are similar to the long-life housing in some areas of China, Southeast Asia, and Russia. Candidate countries expected to be feasible for the entry of long-life housing were selected by determining the top countries that have already entered the long-life housing market and analyzing those selections through additional specific techniques. The external environments of the selected countries were also analyzed. Please refer to the full paper for details.

유인 우주기지 건설기술 개발의 필요성 및 방향 설정 연구

정준수(Chung, Joon-Soo),임석호(Lim, Seok-Ho),양현정(Yang, Hyeon-Jeong),서동구(Seo Dong-Goo),김봉찬(Kim Bong-Chan),이재욱(Lee Jae-Wook) 대한건축학회 2023 대한건축학회 학술발표대회 논문집 Vol.43 No.2

3D Infill을 활용한 PC모듈러 시공시스템 개발

정준수 ( Chung Joo-soo ),임석호 ( Lim Seok-ho ),허병욱 ( Heo Byung-wook ),채지용 ( Chae Ji-yong ),박진호 ( Park Jin-ho ) 한국건축시공학회 2020 한국건축시공학회 학술발표대회 논문집 Vol.20 No.1

The need for off-site construction has increased in the construction industry in Korea in recent years due to the enforcement of the 52-hour workweek, the increasing age of workers on construction sites, the deepening dependence on overseas workers, and the stagnation of productivity in the construction industry. Thus, studies on OSC started in April 2020. In addition, as a national policy study advocating the modular construction method, which is one of the OSC methods, was completed in the first half of 2019. 70 housing units in two complexes that satisfied the Housing Act requirements have been supplied to citizens. However, although modular construction methods have been recognized as a dramatic construction method that achieves shortened construction schedules and solves the issues of cost reduction and the shortage of technical workers on sites by combining the advantages of the manufacturing industry and applying the economies of scale, realistically it has issues due to the rising cost of steel and a low pre-fabrication ratio. Moreover, the construction time of core parts, such as those built by pouring concrete, has become a factor that hinders the shortening of construction times. Thus, this study aims to propose a precast concrete(PC) modular construction system, which fuses three-dimensional infill as an interior finish material and a three-surface PC module that can acts as a structure for a construction method that is economical and can shorten construction time.

모듈러건축의 외장재 모듈정합설계 및 시공

정준수(Chung, Joon-Soo),임석호(Lim, Seok-Ho),설욱제(Seol Wook-Je),백정훈(Baek, Cheong-Hoon) 대한건축학회 2018 대한건축학회논문집 Vol.34 No.6

With the progress of national policy researches on the modular construction, many studies have been conducted regarding the standardization of interior building materials. However, studies on the standardization of exterior building materials are still insufficient, and there are no dedicated exterior materials for modular construction. In this regard, this study investigated the necessary of standardization through the analysis on 7 kinds of exterior materials used in general buildings and exterior building materials applied to modular apartment houses in order to establish design criteria for the standardization of dedicated modular exterior materials. Based on the analysis results, assembly reference plane in conjunction with inside dimensions was set, and panelizing standardized in five parts was proposed to solve the problem of low exterior material standardization rate. It also proposed elastic gasket and steel bracket details that can compensate for the fabrication errors of unit boxes and construction errors in stacking.

모듈러건축의 외장재 표준화를 위한 패널나누기 기준설정 연구

정준수(Chung, Joon-Soo),설욱제(Seol Wook-Je),백정훈(Baek, Cheong-Hoon),임석호(Lim, Seok-Ho) 대한건축학회 2017 대한건축학회 학술발표대회 논문집 Vol.37 No.2

With the progress of national policy researches on the modular construction, many studies have been conducted regarding the standardization of interior building materials. However, studies on the standardization of exterior building materials are still insufficient, and there are no dedicated exterior materials for modular construction. In this regard, this study investigated the necessary of standardization through the analysis on 7 kinds of exterior materials used in general buildings and exterior building materials applied to modular apartment houses in order to establish design criteria for the standardization of dedicated modular exterior materials. Based on the analysis results, assembly reference plane in conjunction with inside dimensions was set, and panelizing standardized in five parts was proposed to solve the problem of low exterior material standardization rate. It also proposed elastic gasket and steel bracket details that can compensate for the fabrication errors of unit boxes and construction errors in stacking.

한국의 Prefab 기술현황 및 융합개발 방향 제안

정준수(Chung, Joon-Soo),설욱제(Seol Wook-Je),백정훈(Baek, Cheong-Hoon),임석호(Lim, Seok-Ho) 대한건축학회 2017 대한건축학회 학술발표대회 논문집 Vol.37 No.1

장수명 공동주택 활성화를 위한 관련 법규의 개정방향

정준수(Chung Joon-Soo),김수암(Kim Soo-Am) 대한건축학회 2009 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.29 No.1(계획계)

Long-Life-Housing plays an important role in "green development and low carbon emission" that the government is aiming at, and also is the housing type that can improve citizens' life quality by realizing the custom made housing corresponding to the changes in life styles and various demands. Long-Life-Housing, based on its durability of the structure, exhibits the changeability of space, easy maintenance and easy remodeling. However, because the high cost of new construction compare to the apartment housing with wall-slab structure and insufficient technology base, construction of Long-Life-Housing is yet on negative lines. For the promotion of Long-Life-Housing, it is necessary to design a plan to overcome the limit of current housing market and attract the demand. Long-Life-Housing, due to the characteristics in technology and policy, is limitedly expected a development and supply in current market situation. On this, the study revised the law that is being the barrier to the supply of Long-Life-Housing separately into durability, changeability, infill, SI separation and licensing, and newly established incentive systems for promotion of Long-Life-Housing.

도시열기를 흡수 · 전환시키는 외벽체 시스템 개발

정준수(Chung, Joon-Soo),양현정(Yang, Hyeon-Jeong),김은영(Kim Eun Young) 대한건축학회 2019 대한건축학회 학술발표대회 논문집 Vol.39 No.1

The summer of 2018 was hotter than any recent years. One of the reasons for this is due to the heat coming out from the atmosphere of the earth and exhaust heat generated after cooling the building inside, which are trapped without going out from the urban area. The heat does not disappear even in evening so that the number of continued tropical night has increased every year. This phenomenon is expected to rise not only in this year but also coming years without decline. It is important to make buildings and cities to have more green space. In addition, it is also important to absorb or convert urban heat to other energy sources by external walls, which are available in more than four sides of building in cities. Thus, the replacement of existing walls into an external wall system that can absorb or convert urban heat would produce a great social and economic value. In this regard, this study aims to derive a development image of external wall system that collects urban heat and convert heat to electric energy through collaboration with other fields such as new materials that can be combined with building sectors in material fields although those materials are not widely used in current building materials. The proposed external wall system integrates three layers including current-flowing panels propose. This study also proposes a building shape mounted with the external wall system. First, national and international study trend on external wall system that can absorb and convert urban heat and quantitative studies on the current patent status were conducted. Second, the study scope is set through the term definition of the external wall system and the number of the layers was set to three. Third, the core technology that can assign the functions to three layers in the external wall system was found from other field. Fourth, the combined image of the external wall system was proposed by fusing three core technologies, and building image mounted with the external wall system was also proposed. This study derived the development image of the external wall system that collected urban heat and converted the heat into electric energy by utilizing element technologies that were developed in fields other than architecture through patents and previous literature reviews. This study also derived a building image mounted with the external wall system that integrated three layers including current-flowing panels. A prototype for this system is not yet developed, and the system is proposed to be viable only theoretically, which is a limitation of this study. However, this study is planned to conduct a performance evaluation on the system after fabricating the prototype by 2019.

동계올림픽 이후 해체된 중고패널의 BIM 기반 재사용 가능성 검토

정준수(Chung, Joon-Soo),임석호(Lim, Seok-Ho),설욱제(Seol Wook-Je),백정훈(Baek, Cheong-Hoon) 대한건축학회 2018 대한건축학회 학술발표대회 논문집 Vol.38 No.2

In Korea, the supply of modular apartment houses based on the Housing Act and the Pyeongchang Winter Olympics were big issues at the beginning of this year. First, due to the quantitative shortage of housing due to the explosive growth of single and two-member households and the necessity to improve the residential environment to diversify accommodation of the housing disadvantaged class, a national policy study had been conducted for the last 4 years and construction of the first modular apartment house was completed at the end of December 2017. However, there is room for improvement in performance, cost and construction period as the existing construction materials due to the lack of specially made interior/exterior materials. Second, due to the Olympic Agenda 2020 recommendation of the IOC, which mandates Olympics host cities to use of temporary facilities and venues (arenas) that can be disassembled, some of the Pyeongchang Olympics related facilities were constructed to enable disassembly. On one hand, there is the advantage of providing solutions to operating costs of the facilities for the local governments after the closing of the Olympics, but it also left the problem of leaving a huge amount of prefab material inventory, such as a large number of disassembled panels. Therefore, we attempt to conduct the study of reusability of BIM utilizing panels in stock as the first step to develop a specially made interior and exterior materials for modular apartment housing as the place to reuse the stock prefab materials.