http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Al합금에서 질소이온주입에 의한 질화물 형성과 기계적 특성 향상
정재필(Jae-Pil Jeong),이재상(Jae-Sang Lee),김계령(Kye-Ryung Kim),최병호(Byung-Ho Choi) 한국표면공학회 2006 한국표면공학회지 Vol.39 No.5
The aluminum nitride(AlN) layer on Al7075 substrate has been formed through nitrogen ion implantation process. The implantation process was performed under the conditions : 100 keV energy, total ion dose up to 2 × 10<SUP>18</SUP> ions/㎝². XRD analysis showed that aluminum nitride layers were formed by nitrogen implantation. The formation of Aluminum nitride enhanced surface hardness up to 265HK(0.02 N) from 150HK(0.02 N) for the unimplanted specimen. Micro-Knoop hardness test showed that wear resistance was improved about 2 times for nitrogen implanted specimens above 5 × 10<SUP>17</SUP> ions/㎝². The friction coefficient was measured by Ball-on-disc type wear tester and was decreased to 1/3 with increasing total nitrogen ion dose up to 1 × 10<SUP>18</SUP> ions/㎝². The enhancement of mechanical properties was observed to be closely associated with AlN formation. AES analysis showed that the maximum concentration of nitrogen increased as ion dose increased until 5 × 10<SUP>17</SUP> ions/㎝².
애니메이션에 배경으로써 표현된 숲의 이미지 분석 : 「이상한 나라의 앨리스」, 「원령공주」를 중심으로
정재필(Jae-Pil Jeong) 한국콘텐츠학회 2019 한국콘텐츠학회논문지 Vol.19 No.9
디지털 영상에서 숲, 물, 하늘과 같은 자연 배경의 표현은 끊임없이 시도 됐고, 발전되어 가고 있다. 애니메이션에서 이러한 배경의 스타일을 기획하고 디자인하는 과정은 애니메이션의 제작 단계 중 프리 프로덕션(pre-production)에 속한다. CG기술의 발전으로 애니메이션의 제작과 소비 속도가 가속화된 요즘 제작 일정을 줄이기 위해 자연물의 배경은 점차 일반화 되어가고 있다. 프리 프로덕션(pre-production)단계에서 콘텐츠의 차별화를 위해 내러티브, 캐릭터만을 중요시하고, 배경은 단순히 움직이지 않는 이미지라고 생각하기 때문이다. 하지만 배경 디자인은 작품의 내러티브를 효과적으로 표현할 수 있는 도구로써 그 역할에 주목할 필요가 있다. 본 연구는 작품 속 배경 디자인의 역할을 찾아보기 위해 숲을 주된 배경으로 하는 애니메이션 「이상한 나라의 앨리스」(1951)와 「원령공주」(1997)를 분석하였다. 산림학에서 얘기하는 7가지 숲 경관의 구분 방법을 토대로 주요 배경인 숲을 조사하고, 작가의 의도와 부합하는지 분석하였다. The expression of natural backgrounds in a digital clip such as forest, water and sky break new ground and evolve. The process of arriving at a certain background style and designing belongs to the pre-production stage of animation produuction. Due to the advancement of CG technology, the production and consumption of animation has accelerated and so in an effort to reduce production time, the natural background has increasingly becomme normalised. For the distinction in contents, narrative and characters are emphasized in pre-production since it is believed that the background design will simply be a still image. However, there is a need to focus on background design as it is a tool that can effectively emphasize the narrative. This research is an analysis of the background designs role in forest background in productions such as 「Alice‘s Adventures in Wonderland」(1951) and 「Princess Mononoke」(1997). It details how appropriate each background forest was for the artists intent using the 7 types of forest landscapes according to dendrology.
급냉응고법에 의한 In-Situ 복합재료로서의 Al-10wt%Ti-4wt%Fe 합금 (II)
김혜성,정재필,권숙인,금동화,Kim, Hye-Seong,Jeong, Jae-Pil,Gwon, Suk-In,Geum, Dong-Hwa 한국재료학회 1998 한국재료학회지 Vol.8 No.12
본 연구에서는 Al-10wt%Ti-4wt%Fe 복합재료를 in-situ공정으로 제조할 수 있는 가능성 및 2 원계 Al-10wt%Ti 복합재료의 낮은 기계적 성질(탄성계수, 상온 고온강도, 내마모특성 등)을 PM SiC/2124 복합재료 수준 흑은 그 이상으로 향상시킬 수 있는 가능성을 조사하였다. 제조된 Al-10wt%Ti-4wt%Fe 합금은 불연속 SiC 강화상으로 보강된 Al-기지 복합재료($SiC{w}$/2124)와 유사한 미세구조를 보여주었으며, 탄성계수 및 인장강도, 내마모성질 등의 기계적 특성이 2원계 Al-10%Ti 합금각 비교해 현저하게 향상되었음이 관찰되었다. 위의 결과는 초정 $Al_3Ti$상 외에도 Fe 원소의 첨가를 통한 추가적인 $Al_{x}Fe$의 분산강화 효과에 기인한 것으로 해석된다. The possibilities of producing Al-10%Ti-4%Fe composites through in-situ processing and thus achieving mechanical property improvements over binary Al-10%Ti to a level or higher exhibited by PM SiC/A12124 composites were explored in this study. The microstructure of in-situ processed Al-10%Ti-4%Fe composites was similar to that of Al matrix composites reinforced with discontinuous SiC particulates(SiC/A12124) and significant enhancements in elastic modulus, tensile strength and wear resistance were observed as compared to Al-10%Ti alloy. These results can be attributed to the in-situ formed Al. Fe by third element addition, leading to additional dispersion strengthening effect over $Al_3Ti$ phase reinforcement in Al-Ti system.
동-스테인리스 강 브레이징 접합부의 계면조직과 접합강도에 관한 연구(ll)
이우천,강춘식,정재필,이보영,Lee, U-Cheon,Gang, Chun-Sik,Jeong, Jae-Pil,Lee, Bo-Yeong 한국재료학회 1993 한국재료학회지 Vol.3 No.6
Cu-P계, 4종의 Cu-P-Pn계 및 3종의 Cu-P-Sn-Ag계 용가재를 사용해 Ar분위기 하에서 1003 및 1033K로 1.2Ks동안 노브레이징한 ST304, STS430 및 저탄소강과 동 접합체들을 전단시험 및 조직시험하였다. 계면에서의 미세조직은 제 종류 즉 첫째,균열을 포함하는 반응층 둘째, 분산층 세째, 균열을 포함하는 반응층과 분산층으로 분류된다. 분산층만이 존재할때 40-60MPa 이상의 상대적으로 높은 전단강도가 얻어지며, 동모재파단을 일으킨다. 이 반응층이 형성되었을때는 반드시 균열이 형성되며, 낮은 전단강도를 나타내고 접합부파단을일으킨다. 이 반응층은 Fe-P계의 화합물이다. 이러한 미소조직 및 강도 경향은 용가재내 Sn의 존재 및 모재내 Ni(또한 Cr)의 존재 유무에 따라 변화한다. The microstructural and shear tests of STS304/, STS430/ and low-C steel/Cu joints brazed using Cu-P, Cu-P-Sn(four type) and Cu-P-Sn-Ag(three type) filler metals at 1003 and 1033K for 1.2ks in Ar atomsphere were performed. Interfacial microstructures were divided into three type ; first, reaction layer contained cracks second, dispersed layer without cracks third, dispersed layer and reaction layer contained cracks. The joints composed only of dispersed layer without cracks have the high shear strength of above 40-60 MPa and result in failure in copper base metal. Low shear strength and joint failure result from the formation of reaction layer which induced cracks. The reaction layer is a Fe-P compound. This tendency of microstructure and shear strength depends on the existence and/or nonexistence of Sn in filler metals as well as Ni (and Cr) in base metals.