RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI우수등재

        피압지하수에 의한 자연사면 연약층내의 간극수압 반응에 관한 모형 실험 연구

        정두영,이광준,Jeong, Doo Young,Lee, Kwang Joon 대한토목학회 1994 대한토목학회논문집 Vol.14 No.3

        자연사면 붕괴의 주요인의 하나는 연약층에서의 간극수압 상승이다. 따라서 이 연약층내의 간극수압 계측이 중요하다. 본 연구는 피압지하수위, 풍화암반 파쇄대의 투수성 그리고 연약층의 풍화정도를 고려한 간극수압 계측의 실내모형 실험이다. 제3기층 붕괴형과 붕괴성 붕괴형의 모형으로 피압지하수 상태에서 filter의 투수성에 따른 연약층내에서의 간극공기압 및 간극수압의 반응을 측정하였다. 간극압의 반응양상에 있어서 제3기층 붕괴형은 시간 변화에 따라 반응양상이 계단형(step type)으로 나타났고 붕괴성 붕괴형은 파형(wave type)으로 나타났다. 간극수압 반응율은 제3기층 붕괴형이 붕괴성 붕괴형보다 크며, 연약층의 풍화도의 증가에 따라 간극수압 반응율은 감소하였다. One of the major elements of a natural landslide is the increase of the pore water pressure in a weakened layer. Therefore, the measurement of the pore water pressure in the layer is important. This work is a laboratory model study of the measurement of the pore water pressure with regard to the confined groundwater level, the permeability of the crack zone and the weathering degree of the weakened layer. By the model of the Tertiary period failure type and the Colluvium failure type, the reactions of the pore air pressure and the pore water pressure were measured in the weakened layer according to the permeability of the filter on the condition of the confined groundwater states. On the reaction phase of the pore pressure according to the during time, the Tertiary period failure type proved to be a step type and the Colluvium failure type turned out to be a wave type. The reaction ratios of the pore water pressure in the Tertiary period failure type are higher than the Colluvium failure type, decrease according to increasing of the weathering degree of the weakened layer.

      • KCI우수등재

        주문진 표준사의 불포화 침투특성 측정에 관한 실험적 연구

        정두영,송경수,Jeong, Doo Young,Song, Kyung Soo 대한토목학회 1993 대한토목학회논문집 Vol.13 No.5

        불포화 영역에서의 침투현상이나 역학적 특성을 파악하기 위해서는 불포화투수계수와 함수특성곡선(含水特性曲線)의 측정이 필요하다. 주문진 표준사를 대상으로 pF시험의 흡인법(수두법)과 가압판법을 이용해 함수특성곡선을 구하고 Richard형 불포화투수시험 장치를 개선한 장치에서 glass필터 $P_3$와 $P_4$를 이용하여 불포화투수계수와 함수특성곡선을 구하였다. 또한 대표적인 추정식을 사용하여 표준사에 대한 불포화투수계수와 함수특성곡선을 유도하고 각각의 실험치와 비교 검토하였다. 불포화시험 계측에 없어서는 안될 필터의 선택기준을 제시하고자 필터의 공기침입압(AEV)과 포화투수계수를 측정하여 양자 사이의 상관성을 나타내었다. In order to study hydraulic properties and mechanical properties on unsaturated region, soil-water retention curve was obtained for suction plate method and pressure plate method, respectively. To investigate permeability of unsaturated soil and soil-water retention curve at the same time, unsaturated permeability tests using an improved Richard's method were performed on Joomoonjin Sand. These experimental results were compared with those by empirical equations. The relationship between air entry value and saturated permeability of filter was obtained for selecting a proper filter in unsaturated soil tests.

      • Ca, Al계 안정처리토의 구조적 특성의 비교

        정두영,최길열,이병석,Jeong, Du-Yeong,Choe, Gil-Yeol,Lee, Byeong-Seok 한국지반공학회 1986 대한토질공학회지 Vol.2 No.3

        점성토인 실트질점토(CL)와 사질토인 사질실트(SM)의 시료토에 Ca계의 소석회, Al계의 황산알미늄 첨가제로 안정처리한 결과 Ca계에 있어서는 실트질점토의 경우 알민산칼슘수화물과 탄산칼슘이 반응생성 되었으며 사질실트의 경우에는 탄산화알민산칼슘수화물과 탄산칼슘이 반응생성 (반도생성)되었고 Al계의 첨가 처리 경우에서는 실트질점토와 사질실트 모두에서 산화암미늄이 생성되어 있음을 X-선 회절분석에 의한 구조적 특성을 비교함으로써 확인되었고 이들 안정처리 효과로서 일축압축강도가 Ca계의 경우는 크게 증가하였으나 Al계의 경우에서는 거의 증가가 없었다. The results of stabilization process in silty.clays and sand-silts, which were, respectively, treated with Calcium hydroxide of the Calcium series and Aluminium Sulphate of the Aluminium series are follows. 1) In the former case used calcium hydrate and calcium cabonate for silty-clays, calcium aluminnium cabonate oxide hydrate and calcium carbonate for sandy-silts were produced 2) In the latter case used Aluminium Sulphate, by X-ray diffraction test, it was found that Aluminium Oxide was produced both in silty-clays and sandy-silts 3) As the results of stabilization process, in the former case, unconfined compression strength was increased greatly but in the latter case it was little increased.

      • 품질코스트시스템에 관한 실태분석 -충북지역의 제조업을 중심으로-

        정두영(Jeong, Du Young),정호영(Jung, Ho Yeong),정재권(Jeong, Jae Gwon) 글로벌경영학회 2016 글로벌경영학회 학술대회 발표논문집 Vol.2016 No.2

        제조기업의 세계시장 환경은 급속히 변화하고 있다. 기술발전 가속화, 경쟁 가열, 규제환경 변화, 소득증대에 따른 소비자 요구의 다양화 등 경영환경이 혁신적으로 변화하고 있다. 이에 품질은 2000년대 이후 세계경쟁 속에서 경영전략의 핵심 성공요인으로 인식되어졌으며, 기업이 성장및 발전하기 위해 상품과 서비스의 질적 향상은 경영의 핵심요인이 되었다. 본 연구는 충북지역 소재 제조기업들의 품질코스트시스템과 기업성과 간의 상관성을 검증하기 위한 품질코스트시스템의 결정변수 조사와 기존 선행연구 결과와의 차이점을 분석하였고, 연구결 과는 다음과 같다. 첫째, 설문조사에 응답한 기업 중 90%이상 기업이 품질관리와 관련된 부서에서 체계적이고 계획적인 품질관리를 수행하고 있다. 둘째, 품질코스트에 필요한 재고관리 측면을 보면 92%의 기업이 계획적인 재고관리 및 자동화 시스템을 도입하였으며, 품질관리는 제조원가 및 매출원가를 기준으로 월별 분석을 수행하고 있는 것으로 나타났다. 셋째, 충북지역의 품질코스트시스템의 실시효과는 대체로 양호한 가운데, 품질코스트시스템 실행에 따른 애로점이 개선되어야 할 것으로 분석되었다. 본 연구결과는 품질코스트시스템 실행현황을 바탕으로 기업의 품질관리, 경영전략 및 정책수립 등에 활용하여 기업의 국제 경쟁력 강화에 기여할 수 있을 것으로 기대된다. Corporate management accounting systems are inadequate for today s environment. In this time of rapid technological change, vigorous global and domestic competition, and enormously expanding information processing capabilities, management accounting systems are not processing useful, timely information for the process control, product costing, and performance evaluation activities of managers. Companies are now recognizing the need for dramatic improvements in their manufacturing operations. Success in the global competitive environments requires that companies commit to order-of-magnitude improvements in quality, enormous reductions in inventory, and successful adoption of adoption of advanced manufacturing technology. Quality is a critical competitive factor in today s environment, with many firms striving to improve the quality of their products. Because of the impact of quality on market share and costs, quality management has become an important factor in schieving productivity gains and increasing, or at least maintaining profits. The main purpose of this study is to search for determinants of quality cost system, and to develope a quality costs model in Chung Buk area, and to identify relationships between effectiveness of quality cost system and business performance. The study procedures are summarized as follows First, previous studies are surveyed and reviewed. Second, the determinants of quality cost system are identified. In this analysis five factors(the level of small group activity, the level of standardization, communication, business awareness quality mind, cost mind, etc.) are selected as independent variable. Next, the findings of this study can be summarized as follows First, both organizational commitment and communication level are documented as influential factors, but the evidence is relatively week. Second, I find that the most influential factor on effectiveness of quality cost system is the small group activity level.

      • KCI등재

        16세기 후반 조선학계의 양명학 비판론과 문묘제도 개정 논의

        정두영(Jeong, Du Young) 역사실학회 2021 역사와실학 Vol.76 No.-

        양명학이 전래되고 수용·비판되었던 명종(明宗) 말 선조(宣祖) 초는 사림세력의 집권에 따른 정치 질서의 재편이 요구·시도되던 시기였다. 그 결과 김세필(金世弼)·박상(朴祥)와 같이 비판적으로 검토하는 경우, 홍인우(洪仁祐)·남언경(南彦經)·노수신(盧守愼)과 같이 양명학을 적극적으로 이해·수용하려는 경우, 이황(李滉)과 그 문하 및 그에 동조하는 학자들과 같이 이단(異端)으로 규정·배척하는 경우, 유성룡(柳成龍)·이정구(李廷龜)처럼 양명학을 우호적으로 인식했다가 비판적 입장을 취하는 경우, 선조(宣祖)처럼 양명학보다는 왕수인(王守仁) 개인의 공업에 주목하는 경우 등 자신의 정치적 성향과 학문적 입장에 따라 양명학에 대하여 다양한 반응을 보였다. 이런 다양한 반응이 가능했던 것은 양명학 문헌의 유포에 특별한 제약이 없었고, 심학(心學)에 대한 평가가 경직되지도 않았으며, 또한 이러한 분위기 속에서 강학과 토론 등 양명학에 대한 학문적 검토가 이루어졌기 때문이다. 이황의 양명학 변척이 이루어지면서부터 양명학에 대한 학계의 인식은 일변하였다. 주자학을 체계화하고 주자도통의 정립을 시도함으로써, 주자학적 정치질서를 확립시키는데 주력했던 이황은, 양명학이 주자학 정치이념을 확고하게 정립·확산시키는 데 큰 장애가 될 것으로 판단하였다. 이에 따라 양명학을 이단으로 규정하고 배척하였다. 이황 문하들도 이황의 입장을 계승하여 양명학을 변척했다. 그 결과 주류 학계의 일반적 입장은 점차 양명학을 이단(異端)으로 규정하고 배척하는 경향을 띠게 되었다. 이황과 그 문하의 변척 활동에 따라 양명학에 대한 이러한 인식은 일반적인 인식으로 자리잡아 갔으며, 양명학이 거론될 때마다 이황의 변척이 그 기준이 되고 있었다. 이를 잘 보여주는 사례가 명의 조선 문묘제도 개정 요구와 이에 대한 조선 조정의 대응 양상이었다. 선조 34년(1601) 명의 요구로 시작된 문묘개정 논의의 초점이 되었던 것은 호거인(胡居仁) 진헌장(陳獻章), 왕수인(王守仁), 설선(薛宣) 등 중국의 유현(儒賢)을 문묘에 종사하는 문제였다. 퇴계 이황의 양명학 변척에 따라 양명학은 이단으로 규정되는 것이 학계의 공론(公論)이었고, 이는 주자의 성리학만이 정학(正學)이며, 그것과 조금이라도 어긋나면 이단(異端)이라는 주자도통의 관점이 그 기준이었다. 이런 관점에서 본다면 육구연(陸九淵)·왕수인(王守仁)의 종사(從祀)는 절대 허용할 수 없는 문제였다. 명의 영향력이 이미 사라진 시점에서도 똑같은 논의가 반복되고 있다는 사실은 이 논의가 단순한 제도 개정 문제가 아니라 이단에 대한 엄격한 비판을 통해 주자정통을 강화하려는 목적이 개입되어 있었음을 보여준다. At the end of King Myeongjong and King Seonjo, where Yang Myung-hak was introduced, accepted, and criticized, it was a time when the reorganization of the political order was demanded and attempted according to the power of the Sarim forces. As a result, in the case of critically reviewing such as Kim Se-pil and Park Sang, in the case of actively understanding and accepting Yang Myung-hak, such as Hong In-woo, Nam Eon-kyung, and Noh Su-sin, and in the case of rejecting the rules or the scholars who sympathize with him, Yuseong. These various reactions were possible because there were no special restrictions on the distribution of Yangmyeonghak literature, the evaluation of psychology was not rigid, and academic reviews of Yangmyeonghak such as lectures and discussions were conducted in this atmosphere. Since Yi Hwang"s rejection of Yangmyeonghak, the academic perception of Yangmyeonghak has changed. Yi Hwang, who focused on establishing a runner-up political order by systematizing runner-up and attempting to establish runner-up communication, judged that Yang Myung-hak would be a major obstacle to firmly establishing and spreading the runner-up political ideology. Accordingly, Yang Myung-hak was defined as heresy and rejected. Yi Hwang"s servants also succeeded Yi Hwang"s position and transformed Yang Myung-hak. As a result, the general position of the mainstream academia gradually tended to define and reject bimyunghak as a heresy. According to Yi Hwang and his subordinates" transformational activities, this perception of Yang Myung-hak became a general perception, and whenever Yang Myung-hak was mentioned, Yi Hwang"s exclusion was the standard. A good example of this was the demand for revision of the Joseon Munmyo system and the response of the Joseon adjustment to this. The focus of the discussion on the revision of the tomb, which began at the request of King Seonjo in the 34th year of King Seonjo (1601), was on the issue of Chinese Yu Hyeon, including Ho Geoin, Jinheonjang, Wang Suin, and Seolseon, engaged in the tomb. According to Toegye Yi Hwang"s rejection of Yang Myung-hak, Yang Myung-hak was defined as heresy in the academic world, and only the Neo-Confucianism of the runner was suspended, and if it deviated a little from it, the perspective of Ju Ja-Dotong was the standard. From this point of view, the work of Yuk Gu-yeon and Wang Su-in was absolutely unacceptable. The fact that the same discussion is repeated even at the time when the influence of the title has already disappeared shows that this discussion was not just a matter of institutional amendment, but the purpose of strengthening the self-government through strict criticism of heresy.

      • KCI등재
      • KCI등재

        품질코스트시스템에 관한 실태분석

        정두영(Jeong Du Young),정호영(Jung Ho Yeong) 글로벌경영학회 2016 글로벌경영학회지 Vol.13 No.4

        본 연구는 제조기업들의 품질코스트시스템 도입과 활용상태 및 기업성과 형성에 중요한 기여요인으로 평가받고 있는 품질코스트시스템의 결정변수에 대한 실태를 충북지역에 소재하는 제조기업들을 중심으로 살펴보았다. 연구결과는 다음과 같다. 첫째, 설문조사에 응답한 충북소재 제조기업 중 90% 이상의 기업이 품질관리 관련부서에서 체계적이고 계획적인 품질관리를 수행하고 있는 것으로 나타났다. 둘째, 품질코스트에 필요한 재고관리 측면을 보면 92%의 기업이 계획적인 재고관리 및 자동화 시스템을 도입하였으며, 품질관리는 제조원가 및 매출원가를 기준으로 월별 분석을 수행하고 있는 것으로 나타났다. 셋째, 충북지역의 품질코스트시스템의 실시효과는 대체로 양호한 가운데, 품질코스트시스템 실행에 따른 애로점이 개선되어야 할 것으로 분석되었다. 본 연구결과는 품질코스트시스템 실행현황을 바탕으로 기업의 품질관리, 경영전략 및 정책수립 등에 활용되어 기업의 국제 경쟁력 강화에 기여할 수 있을 것으로 기대된다. The main purpose of this study is to search for determinants of quality cost system which is considered to be an important contributor of business performance , and to analyze the utilization status on a quality costs system of manufacturing companies located in Chungbuk area. The study procedures are summarized as follows First, previous studies are surveyed and reviewed. Second, the determinants of quality cost system are identified. In this analysis five factors(the level of small group activity, the level of standardization, communication, business awareness quality mind, cost mind, etc.) are selected as independent variable. Next, the findings of this study can be summarized as follows First, more than 90% of the manufacturing companies in Chungbuk which responded to the questionnaire have been performing planned quality management Second, I find that 92% of companies have introduced planned inventory management and automation system, and quality management is performing monthly analysis based on manufacturing cost and cost of goods. Third, the implementation effectiveness of quality cost system in manufacturing companies is generally good, but it is analyzed that the problems of quality cost system should be improved.

      • KCI등재

        객체 위치를 기반으로 한 P&ID 연결 정보 인식 연구

        정두영(DooYoung Jeong),박광필(Kwang-Phil Park),임다빈(Dabin Lim),정현(Hyun Chung) (사)한국CDE학회 2022 한국CDE학회 논문집 Vol.27 No.4

        In the piping layout design process, it takes a lot of hours to read the piping and instrumentation diagram (P&ID) and find the connection information. P&IDs are often delivered as images or non-digital drawings for various reasons. In this study, to extract connection information automatically from drawing images, we recognize text, symbols, and lines, and organize connection relation based on the objects’ location. Tesseract OCR, an optical character recognition engine, was used for text recognition, and an Object Detection model and OpenCV were used in combination for symbol and line, and those are implemented in Python. Connection between the objects detected was evaluated based on the coordinates of them and some pixel distance considering the drawing resolution. To verify the proposed method, the possibility of extracting drawing information was reviewed by testing 9 P&ID drawings provided by a shipyard. The overall recognition rate was 74.8% for text and more than 97% for symbols. A digital file which includes the connection relation between the pipes and the instruments generated after the recognition stage, and it shows that the method finds the connection between pipe-pipe and pipe-instrument in the accuracy of 76.2% and 89.7% respectively.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼