http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고로슬래그 미분말을 혼입한 보통강도 고유동 콘크리트 배합에 관한 실험적 연구
장현오(Jang, Hyun-O),지남용(Jee, Nam-Yong) 대한건축학회 2013 大韓建築學會論文集 : 構造系 Vol.29 No.6
High fluidity concrete is the concrete that has a high level of fluidity without the separation of materials while it is not hardened and has the self-compacting property without the extra work for compaction. In order to expand the usability of such high fluidity concrete for general usage, the formulation of an economical binder through the recycling of resources and reasonable mixing conditions for normal strength and high fluidity concrete are required. Therefore, this study formulated concrete binders at Level Six using ground granulated blast furnace slag for W/B 0.45 and 0.55, and then, performed a fluidity securing experiment according to the addition rates of a air entraining and high-range waterreducing agent. Accordingly, for the mixes in which the separation of materials occurred, the fluidity securing experiment was run after adding a viscosity agent in the concrete, which was 0.05% of the amount of the powder. According to these results, the optimal mixing ratios regarding the mixing of normal strength and high fluidity concrete using ground granulated blast furnace slag were BFS 15% and a air entraining and high-range waterreducing agent 1.25% for W/B 0.45, and were BFS 30% and a air entraining and high-range waterreducing agent 0.75% for W/B 0.55.
초고성능 프리캐스트 콘크리트 바닥판 현장이음부의 휨 인장성능 평가에 관한 실험적 연구
장현오 ( Jang Hyun O ),장종민 ( Jang Jong Min ),조근희 ( Cho Keun Hee ),이한승 ( Lee Han Seung ) 한국구조물진단유지관리공학회 2017 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.21 No.2
In this study, flexural and tensile properties of pre-cast UHPC deck joints with surface treatment applied to fields were evaluated. It showed that all specimen set experimental variables satisfied sufficient resisting load efficiency and crack standard.
6-gingerol을 혼입한 수용액내에서의 전기화학적 부식특성 평가에 관한 실험적 연구
장현오 ( Jang Hyun-o ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.1
최근 국내에서는 콘크리트 제조 시 내구성 확보를 위한 일환으로 대부분 아질산계 무기 방청제를 사용하고 있으나, 이는 NO가스의 발생 및 발암물질 함유 등의 이유로 유럽지역에서는 사용이 금지(유럽 : 리치협약, REACH Regulation) 되어있는 실정이며, 이에 대한 아질산계 방청제를 대체할 수 있는 우수한 성능의 친환경 유기계 방청제 개발이 시급히 필요한 상황이다. 본 연구는 생강추출물의 비휘발성 성분인 6-gingerol과 curcumin을 이용하여 친환경 유기계 방청제를 개발하고 이를 활용한 친환경 고내구성 하이브리드 콘크리트를 개발하기 위한 기초연구로써, 콘크리트 모사 수용액내에서의 전기화학적 방청 성능 평가에 관한 실험적 연구를 수행하였다.
시공이음부 계면처리방법에 따른 초고성능 콘크리트의 전단부착성능 평가에 관한 실험적 연구
장현오 ( Hyun-o Jang ),김보석 ( Bo-seok Kim ),이한승 ( Han-seung Lee ) 한국건축시공학회 2016 한국건축시공학회지 Vol.16 No.3
시공이음부 발생에 따른 초고성능 콘크리트의 일체성을 확보하기 위해서는 그 특성을 수반함과 동시에 전단부착성능에 대한 정량적인 계면처리방법이 필요할 것으로 판단된다. 이에, 본 연구는 초고성능 콘크리트 타설 시, 발생하는 시공이음부의 부착성능을 확보하기 위한 일환으로서 시공이음부 계면처리방법에 따른 전단부착성능 평가를 통하여 재료적인 측면에서의 합리적인 계면처리방법을 도출하고자한다. 초고성능 콘크리트 배합은 180MPa의 배합강도를 사용하였으며, 계면처리방법으로는 MN, AC, GR-10-0, GR-20-0, GR-30-0, SH-30-5, SH-30-10으로써 총 7수준으로 설정하였다. 실험체는 150×150×150mm의 Size로 제작 후, 전단부착강도 평가를 위하여 Direct shear test를 실시하였다. 실험결과, 시공이음부 접합면에 대해 계면처리를 실시한 경우 부착성능이 향상되는 것을 확인하였으며, 접합부 단면적이 증가할수록 초고성능 콘크리트의 일체성 확보에 유리할 것으로 판단된다. 또한 콘크리트의 일체성을 확보하기 위해서는 접합면 단면적의 비율 및 요철의 깊이, 개수 등이 적절히 고려되어야 할 것으로 판단된다. Structural performance and durability of ultra high performance concrete could demonstrate optimal performance when unity was kept. Accordingly, it is necessary to involve the characteristics and quantitative surface treatment at the same time in order to retain oneness of Ultra-High-Performance Concrete(UHPC) according to construction joint occurrence. Therefore, this study derives a reasonable surface treatment method in a material’s point of view through the shear adhesion performance evaluation according to the construction joints surface processing method as a part for securing the adhesion performance of the construction joints when casting UHPC. 180 MPa of required average strength was used for mix of UHPC and surface treatment method was set to totally 7 level that MN, GR-10-0, GR-20-0, GR-30-0, SH-30-5, SH-30-10. After the specimen were manufactured to a size of 150×150×150mm, Direct shear test was performed to evaluate the shear adhesion strength. As a result, it was confirmed that the adhesion performance was improved when executing a surface treatment for the construction joint interface and standard of failure mode of specimen was over Type C. Also, It was considered that interface of cross section and depth of concavo-convex should be concerned.
콜드조인트 지연시간에 따른 초고성능 콘크리트의 부착특성에 관한 실험적 연구
장현오 ( Jang Hyun-o ),장필성 ( Jang Pil-sung ),최재석 ( Choi Jae-seok ),이한승 ( Lee Han-seung ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.1
본 연구는 콜드조인트 지연시간에 따른 180MPa의 부착성능을 평가하는 것을 목적으로 한다. 콘크리트 배합강도 NSC(30MPa) 및 UHPC80(MPa), UHPC(180MPa)를 대상으로 지연시간에 따라 1차와 2차로 구분하여 시험체를 제작하였으며, 전단부착성능의 관한 평가 및 거동을 파악하기 위해 Direct shear test 실시하였다. 실험결과, NSC30+ NSC30 실험체에서는 타설 지연시간 60분까지 전단부착강도 저하율 약 5% 미만으로 나타나, 타설 지연시간이 부착성능에 영향이 없는 것으로 나타났다. 반면, UHPC80 및 UHPC180의 경우, 콘크리트 강도가 높아질수록 전단부착성능이 낮아지는 경향을 나타내었으며, 특히, UHPC180의 타설 지연시간 15분의 경우, 전단부착강도 감소율 약 10%로서, 지연시간이 증가할수록 부착성능이 급격하게 저하하는 것을 확인하였다.