http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이승준(Seungjun Lee),이강진(Kangjin Lee),정종태(Jongtae Jung),하영철(Youngchul Ha),안승희(Seunghee Ahn),이철구(Chulgu Lee),허재영(Jaeyoung Her) 한국유체기계학회 2001 유체기계 연구개발 발표회 논문집 Vol.- No.-
Korea Gas Corporation(KOGAS) have constructed a gas flowmeters' calibration facilities at Jungdong Bucheon. The facilities consisting of 6 reference turbine meters can perform calibrations of large capacity natural gas flowmeters up to 9,600 ㎥/h at 95 kPa. This large capacity and high pressure natural gas facilities is traceable to the national standard of gas flow rate (KRISS). In this article the motive of construction and description of design are summarized.
천연가스 계량배관 내$\cdot$외의 온도차가 계량오차에 미치는 영향에 관한 연구
하영철,이철구,장승룡,이강진,Ha Youngcheol,Lee Chulgu,Chang Seungyong,Lee Kangjin 한국가스학회 1998 한국가스학회지 Vol.2 No.1
단열이 되어 있지 않은 천연가스 계략배관에서 배관 내$\cdot$외의 온도차로 인한 오리피스 유량계 오차를 정성적으로 실험하였다. 고려된 주요 인자는 유속과 대기온도이며 태양복사열도 일부 고려되었다. 실험결과 유량이 극히 작고, 배관 내$\cdot$외의 온도차가 큰 하절기 유동조건에서도 그다지 큰 오차는 발생하지 않는 것으로 분석되었다. Experiments had been conducted Qualitatively regarding flow measurement errors of orifice flowmeter due to temperature difference between the inside and outside the natural gas meter-run in case of no pipe insulations. The primary factors considered in this study are fluid velocity and surrounding temperature. In addition, a portion of thermal radiation due to the sun was involved as a factor. The results showed that the considerable errors were not detected even in conditions of low flow rates and large temperature difference between the inside and outside the meter-run.
이상규(Sanggyu Lee),이철구(Chulgu Lee),양영명(Young-myung Yang) 한국가스학회 2009 한국가스학회 학술대회논문집 Vol.2009 No.4
천연가스가 가스전에서부터 사용자에게 전달되는 방법은, 대단위 배관으로 전달하는 PNG (Pipeline Natural Gas) 방식과 액화해서 전달하는 LNG (Liquified Natural Gas) 방식으로 크게 분류된다. LNG 방식으로 천연가스를 이송할 경우, 천연가스를 약 -162 ℃로 액화해야 한다. 천연가스 액화플랜트는 크게 전처리설비, 중질분 분리설비, 액화설비, 그리고 저장설비로 분리되는데, 그중에 액화설비는 공정 형태에 따라, C3MR, Cascade, DMR 등 여러 공정으로 분류된다. 본 논문에서는 액화공정 중 세계적으로 가장 널리 적용된 C3MR공정에 대한 Simulation을 구성하고 액화 용량 변화에 따른 특성에 대한 연구결과를 설명하였다. There are two ways in the transportation methods of the natural gas from the gas wells to the end users: first, the PNG (Pipeline Natural Gas) method delivering the natural gas through the large-scale pipelines, and the second, the LNG (Liquified Natural Gas) method delivering the LNG after the liquefaction process. When using the LNG method to transport the natural gas, it is essential to liquefy the natural gas to -162℃. The natural gas liquefaction plant consists of a pre-processing process, fractionation process, liquefaction process, and storage tank. The natural gas liquefaction processes are classified into several kinds such as C3MR, Cascade, DMR and others. In this study, it is explained that the simulation study of the C3MR process which is applied worldwide and how the characteristics get changed according to train capacity.