http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
가솔린 엔진 흡기포트내의 연료거동 및 벽류생성 가시화 방법에 관한 연구
김봉규(B.G.Kim),이기형(K.H.Lee),이창식(C.S.Lee),강건용(K.Y.Kang) 한국자동차공학회 1997 한국자동차공학회 춘 추계 학술대회 논문집 Vol.1997 No.6_1
In a gasoline engine with port injection system, the fuel behavior in the intake port has significant influence on the HC emission and the precise A/F control. That is to say, it is inevitable that the injection direction and behavior of fuel injected in the intake port have an effect on the generation of unbumed HC within a cylinder.<br/> In this paper, we visualize fuel behavior in the intake port using micro CCD camera synchronized with the stroboscope and investigate the fuel-film characteristics formed at the wall of intake port by processing image captured with VCR in the transparent intake port made of acryl.<br/> With these measuring methods, it was found that the fuel behavior and the formation of fuel-film in the intake port could be evaluated qualitatively. These results show that 2spray injector has a good response and minimizes the fuel-film in a DOHC gasoline engine.<br/>
MPI 엔진용 공기 보조 인젝터의 분무 미립화 및 및 연소 특성에 관한 연구
이창식(C. S. Lee),이기형(K. H. Lee),서영호(Y. H. Seo) 한국자동차공학회 1996 한국자동차공학회 춘 추계 학술대회 논문집 Vol.1996 No.11_2
The spray characteristics of air-assisted fuel injection and its effects on the lean combustion was investigated in this study. The atomization characteristics of a Bosch fuel injector inserted into the air-assist adapter is measured with PMAS. Droplet size decreased with air supplied and fine spray with below 6O㎛ of SMD is acquired at the assistant air pressure over O.5bar. The lean combustion performance of a 1.8L DOHC engine equipped with air-assist adapters is tested on the dynamometer. When the assistant air pressure is increased. lean limit was extended, and fuel consumption and emissions were decreased.
이창식(C.S.Lee),김정헌(J.H.Kim) 한국자동차공학회 1992 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
This paper deals with the results of injection characteristics and the influence parameters upon the fuel injection performance of the inline injection system in a diesel engine. In this study, the characteristics of the injection rate, the injection pressure and the injection duration have been investigated by changing the injection parameters. The predicted results and injection performance are compared to the measured data from the injection test system.<br/> <br/>
고속 유동 계측을 위한 PIV 시스템 개발에 관한 연구
이창식(c.s. Lee),이기형(K.H. Lee),전문수(M.S. Chon),김영호(Y.H. Kim) 한국자동차공학회 1996 한국자동차공학회 춘 추계 학술대회 논문집 Vol.1996 No.11_2
Abstract: An analysis of the spatial structure in flow field is very important thing in an engine inlet system. In this study, the PIV(Particle Image Velocimetry) system is developed to analyze high velocity and the bulk flow motion in a gas flow field. The single-frame double pulsed technique is used with 2-D Fourier transform and 2-D auto-correlation algorithm. The discrete Fourier transform of magnified particle pairs is taken numerically to make the fringe image. And then taking inverse Fourier transform of fringe image results in the correlation pattern. Flow visualization technique and single-trame PTV(Particle Tracking Velocimetry) are employed to clear directional ambiguity as well. And the PIV system is applied to measure the velocity field of gasoline fuel spray and cylinder flow in steady flow test bench. In fuel spray experiments, the axial velocity is getting larger downward, and radial velocity is getting smaller outward. And the spatial resolution in PIV is much higher than that of PTV in obtaining velocities.
고압 분사 디젤 인젝터의 노즐 형상이 분사 특성 및 분무 거동에 미치는 영향
이창식 ( C. S. Lee ),박성욱 ( S. W. Park ),전문수 ( M. S. Chon ) 한국분무공학회 2004 한국액체미립화학회지 Vol.9 No.1
N/A This paper describes the characteristics of injection rate and macroscopic behavior of fuel spray injected from common-rail type diesel injectors with different nozzle geometries. The injection rates according to the nozzle geometries were measured at different energizing duration of the injector solenoid and injection pressure by using the Bosch`s injection rate meter based on the pressure variation in the tube. The spray behaviors injected from the different nozzles were visualized using the spray visualization system composed of an Ar-ion laser, an ICCD camera, and a synchronization system at various injection and ambient pressures. It is revealed that VCO nozzle has higher spray tip velocity at the early stage of injection duration and wider spray cone angle than the mini-sac nozzles. Also the spray cone angle is increased with the increase of nozzle diameter.