http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
C-14 요소호기검사의 정량치가 Helicobacter pylori 감염 정도를 반영할 수 있을까?
임석태(Seok Tae Lim),손명희(Myung Hee Sohn),이승옥(Seung Ok Lee),이수택(Soo Teik Lee),정명자(Myoung Ja Jeong) 대한핵의학회 2001 핵의학 분자영상 Vol.35 No.1
N/A Purpose: The C-14 urea breath test (C-14 UBT) is the most specific noninvasive method to detect Helicobacter (H) pylori infection. We investigated if the C-14 UBT can reflect the presence and degree of H. pylori detected by gastroduodenoscopic biopsies (GBx). Materials and methods: One hundred fifty patients (M:F=83:67, age 48.6±11.2 yrs) underwent C-14 UBT, rapid urease test (CLO test) and GBx on the same day. For the C-14 UBT, a single breath sample was collected at 10 minutes after ingestion of C-14 urea (137 KBq) capsule and counting was done in a liquid scintillation counter for 1 minute, and the results were classified as positive ( 200 dpm), intermediate (50∼199 dpm) or negative (〈50 dpm). The results of CLO tests were classified as positive or negative according to color change. The results of GBx on giemsa stain were graded 0 (normal) to 4 (diffuse) according to the distribution of H. pylori by the Wyatt method. We compared C-14 UBT results with GBx grade as a gold standard. Results: In the assessment of the presence of H. pylori infection, the C-14 UBT global performance yielded sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV) and accuracy of 92.5%, 88.4%, 97.1%, 88.4% and 91.3%, respectively. However, the CLO test had sensitivity, specificity, PPV, NPV and accuracy of 83.2%, 81.4%, 91.8%, 81.4% and 82.7%, respectively. The quantitative values of the C-14 UBT were 45±27 dpm in grade 0, 707±584 dpm in grade 1, 1558±584 dpm in grade 2, 1851±604 dpm in grade 3, and 2719±892 dpm in grade 4. A significant correlation (r=0.848, p<0.01) was found between C-14 UBT and the grade of distribution of H. pylori infection on GBx with giemsa stain. Conclusion: We conclude that the C-14 UBT is a highly accurate, simple and noninvasive method for the diagnosis of ongoing H. pylori infection and reflects the degree of bacterial distribution. (Korean J Nucl Med 2001;35:61-68)
이석태(Lee, Seok-tae),박남률(Park, Nam Ryoul),전인찬(Jeon, Inchan) 한국방재학회 2017 한국방재학회논문집 Vol.17 No.4
공중음파는 인간의 가청영역 이하의 주파수 대역을 가지는 초저음파로 거리에 따른 에너지 감쇠 효과가 적어 수백 km 이상까지 전달되는 특징이 있어, 먼 거리에서 발생하는 화산, 핵실험, 미사일 발사 등의 감시에 유용하다. 공중음파 관측소는 일반적으로 센서를 배열로 배치하여 신호가 입사된 각도를 추정할 수 있도록 하며, 이와 같은 형태를 배열 관측소라고 한다. 배열 관측소의 성능은 센서의 배치 형태에 따라 달라지는데, 배치 형태 외에도 접근성, 소음원 등을 동시에 고려해야 하기 때문에 실제배치에 적용할 수 있는 설계에 이르기까지 현장방문 등의 접근성으로 인해 큰 어려움이 존재하여 왔다. 본 논문은 이와 같은 문제점을 해결하기 위하여 지리정보를 기반으로 배열 관측소를 설계하여, 배열 관측소의 성능과 지형을 동시에 만족시키는 설계가 가능하도록 하기 위한 시스템 설계에 관한 것이다. 배열 관측소 설계에 필요한 요구사항을 정의하고 이를 만족하기 위한 시스템을 설계하여 적용하였다. 본 논문의 결과는 관측소 설치와 관련된 의사결정업무 이행 시 유용하게 사용될 수 있을 것으로 기대한다. The infrasound is an ultra-low-frequency wave that lower than human audible range. It can be transmitted to several hundred km or more, because the infrasound has low energy attenuation characteristics depending on the distance. So it is useful for monitoring events from long distance like volcanoes, nuclear tests, and missile launches. An aerial acoustic observatory generally arranges sensors in an array so as to be able to estimate the incident angle of the signal, and this form is called an array. The performance of the array station depends on the layout of sensors. In addition to the layout of the array should be consider the accessibility of the site, the background noise source to the actual layout has existed. In this paper, we propose a system for designing an infrasound array based on geographic information system to satisfy the performance and the geographical requirements. We defined the requirements for the infrasound array station design and apply to the system. The result of this paper is expected to be useful for the implementation of decision-making tasks related to the installation of infrasound arrays.
기상청 공중음파 관측소 표준 배경잡음 모델 개발 예비 연구
이석태(Lee, Seok-tae),박남률(Park, Nam Ryoul) 한국방재학회 2017 한국방재학회논문집 Vol.17 No.4
공중음파는 대기를 통해 전달되어 온도, 습도, 바람 등에 의해 도달신호의 특성이 변하게 된다. 특히, 관측소에 상시 작용하고 있는 배경잡음으로 인해 양질의 공중음파 신호를 확보하기 어려운 경우가 많다. 배경잡음의 원인은 인간 활동에 의해 생성되는 노이즈 및 바람에 의한 영향을 큰 원인으로 들 수 있다. 실제 확인하고자 하는 공중음파 신호의 품질을 확보하기 위해 배경잡음의 주요 주파수 대역 등을 확인하고 정량화하는 배경잡음모델 개발은 원하는 신호의 신호 대 잡음비를 높이기 위한 필터 등의 설계에 있어서 중요하다. 본 논문에서는 기상청 양구와 철원의 2015년도 공중음파 기록의 파워 스펙트럼 밀도를 구해 상위 95%와 하위 5%의 영역내의 주파수 별 최대 밀도를 구한 배경잡음 모델을 구하였다. 파워 스펙트럼 밀도 분석 결과 철원 관측소에 비해 양구 공중음파 관측소가 상대적으로 높은 잡음수준을 가지고 있고 특정 주파수 대역에서는 국제 공중음파 표준 잡음 모델을 초과하는 것으로 나타났다. 2015년도의 기상데이터 분석을 통해 양구의 높은 관측소 고도로 인한 바람의 영향임을 확인할 수 있었다. 본 논문의 결과는 양질의 공중음파 기록을 확보하기 위한 배경잡음모델 결과로 사용될 수 있을 것으로 기대한다. The infrasound is transmitted through the air, so the characteristics are changed by temperatures, humidity, and wind of the air. It is difficult to obtain high quality infrasound signals due to the background noise. The main sources of the background noise are human activities and wind. The development of a background noise model that quantifies the frequency band is important in the design of filters to improve the signal-to-noise ratio. In order to secure the quality of the infrasound signals. In this paper, we obtain the power spectral densities for the year of the 2015 infrasound recordings of Yanggu and Cheolwon station, and develop the model that obtained by maximum density per frequency in the upper 95% and lower 5% regions. Power spectral density analysis showed that the Yanggu station had relatively higher noise levels than the Cheolwon station and exceeded the international standard background noise model in certain frequency bands. The analysis of the meteorological data for the year of 2015 shows that the wind interfered the signal due to the high altitude of the station. The results of this paper are expected to be used as a background noise model to obtain high quality infrasound data.