http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이상욱,형창희,유문희,신천식,안재영,Lee, S.U.,Hyoung, C.H.,You, M.H.,Sin, C.S.,Ahn, J.Y. 한국전자통신연구원 2016 전자통신동향분석 Vol.31 No.3
위성항법 보강시스템은 항법위성인 GPS 제공 항법신호를 수신 처리하여 각종 오차 성분을 제거시킴으로써 산출된 위치정확도, 시스템 가용도 및 제공신호에 대한 무결성 등이 향상됨에 따라 항공분야, 해양분야 및 차량내비 등 육상분야에서 요구하는 위치정확도뿐만 아니라 보강 및 무결정정보 등을 특정 성능 요구를 만족시킬 수 있도록 제공하는 시스템이다. GPS 신호에 대한 오차를 보강한 메시지를 활용하는 매체를 무엇을 활용하는지에 따라 구분할 수 있는데 위성을 이용하면 위성기반 보강시스템(Satellite Based Augmentation System: SBAS), 지상망을 이용하면 지상기반 보강시스템(Ground Based Augmentation System: GBAS), 비행기를 이용하면 항공기반보강시스템(Aircraft-Based Augmentation System: ABAS)으로 일컫는다. 본고에서는 위성항법 보강시스템의 현황과 그 관련 기술에 대하여 기술하고 한다.
이상욱,유준규,변우진,Lee, S.,Ryu, J.G.,Byun, W.J. 한국전자통신연구원 2021 전자통신동향분석 Vol.36 No.4
Navigation satellite systems (GPS, GLONASS etc.) provide three main services, i.e., positioning for location based services, navigation for multi-modal transportation services, and timing for communication and critical infrastructure services. They were started as military systems but were extended to civil service. Navigation satellite navigation system began with GPS in the USA and GLONASS in Russia at nearly the same time. Indian NavIC and Chines BDS announced their FOCs in 2016 and 2020, respectively and European Galileo and Japanese QZSS are catching up others. In these days, Navigation Satellite System, Positioning, Navigation, and Timing services are part of our daily life very closely. They are required for autonomous driving car, Unmanned vehicles like UAV, UGV, and UMV, 5G/6G telecommunications, world financial system, power system, survey, agriculture, and so on. The services among navigation satellite systems are very competitive and also cooperative one another. This article describes the status of these systems and evolution in the technical and service senses, which may be helpful for planning korea positioning system(KPS).
SIDM(Smooth Impact Drive Mechanism)을 이용한 초정밀 회전기구에 대한 연구
이상욱(S. Lee),전종업(J. U. Jeon),박규열(K. Y. Park),부경석(K. S. Boo) 한국정밀공학회 2006 한국정밀공학회 학술발표대회 논문집 Vol.2006 No.5월
This paper represents a ultra precision rotational device where the smooth impact drive mechanism(SIDM) is utilized as a driving mechanism. Linear motions of piezoelectric elements are converted to the rotational motion of disk by frictional forces generated between the rotational disk and the friction bars which are attached to the piezoelectric elements. This device was designed to drive a rotational disk using slip-slip motion mechanism based on stick-slip motion mechanism. Experimental results show that the angular velocity was increased in proportion to the magnitude of supplied voltage to piezoelectric element. In our device, the smooth rotational motion was obtained when the driving frequency has been reached to 500㎐ under the driving voltage of 100V. The amount of step movement has been revealed to be 3.44×10?⁴ radian.
이상욱(Lee S.W.) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.8
본 연구는 2008∼2013년 한국의 은행 대출 자료를 이용하여 건설 및 부동산업으로의 대출 집중과 은행 위험의 관계를 분석하였다. 각 은행의 기업대출에서 건설, 부동산업으로의 대출이 차지하는 비중을 이용하여 건설 및 부동산업의 대출을 산정하였다. 은행 위험은 부실여신(3개월 이상 연체 및 무이자 여신) 규모와 은행의 자기자본비율로 산정하였다. 분석 결과에 따르면, 1기 이전 은행의 건설, 부동산업 등으로의 대출 비중이 증가할수록 은행의 부실여신 규모는 감소하고 자기자본비율은 제고되는 것으로 나타났다. 은행의 특정 산업으로의 대출 집중은 은행의 위험을 증가시키지 않을 것으로 추정된다. 이는 대출집중으로 인해 은행들이 해당 산업에 대한 대출 전문심사 능력향상이 향상됨에 따라 이들 산업에 대한 정보비대칭성을 낮출 수 있기 때문인 것으로 추정된다. 한국의 경우 건설 및 부동산임대업으로의 대출 증가가 은행의 부실대출 위험으로 연계될 가능성은 크지 않은 것으로 진단된다. This paper analyzes the relationship between the industry bank loan concentration and its risk using the Korean bank loan data. We focused on the construction and real estate industry which are controversial on the non performing loans. We used the construction or leasing real estate industry bank loan ratio of the corporate bank loan as the bank loan concentration proxies. The bank risk are measured as the equity capital rate or the size of non performing loans. According to the results of this research, the preceding bank loan ration of the construction industry or the leasing real estate industry decreases the non performing loans and increases the equity capital rate. The bank loan concentration to the specific industry may not increase bank risk. The bank loan concentration may decrease the information asymmetry and improve the screening abilities the non performing loans. We suggest that the bank loan concentration on the construction or leasing real estate industry in the Korean economy may not directly connected to the bank risk.
이상욱(S.W.Lee),김재훈(J.H.Kim),이성팔(S.P.Lee) 전력전자학회 2003 전력전자학술대회 논문집 Vol.2003 No.7(1)
본 논문에서는 상용무선망을 이용하여 각종 계측 및 측정 탑재장치에 의하여 측정된 데이터를 수집 및 전송하는 지상고정 초소형 위성과 이를 이용한 데이터 수집 시스템에 대하여 기술한다.
무 펀치 피어싱 공정에서 직벽 구현을 위한 최적화 해석
이상욱(Lee S.W.),엄태준(Um, Tai-Joon),주영철(Joo Youngcheol),김국원(Kim Kug Weon),권계시(Kwon, Kye-Si) 한국산학기술학회 2010 한국산학기술학회논문지 Vol.11 No.1
논문에서는 무 펀치 피어싱 공정 (기존 피어싱 공정에서 펀치 대신 유압을 사용)을 통해 형성된 구멍에 서 내부에 수직 벽을 형성시키는 데 중요한 역할을 하는 공정 인자를 찾기 위한 최적화 해석을 수행하였다. 최적화 기법으로는 다꾸치법을 사용하였다. 또한 수직 벽 형성을 해석하는데 있어서는 연성파괴이론 중 하나인 Lemaitre 손 상이론을 차용하였다. 최적화 해석 결과 수직벽 형성에 가장 큰 영향을 주는 인자로서 '다이의 모서리 반경'이 선정 되었다. In this work, optimization analysis has been accomplished to find important process factors for realization of vertical wall around holes punched by the punchless piercing process. Taguchi method was used for optimization analysis. Lemaitre damage theory, one of the ductile fracture models, was also adopted to simulate numerically formation of vertical wall. From the results of analysis the most influencing factor that affects the vertical wall has been revealed to be 'Corner Radius of Die'.
무 펀치 피어싱 공정에서 교번식 고압 적용을 통한 구멍 내 직벽 구현 해석
이상욱(Lee S.W.),엄태준(Um, Tai-Joon),주영철(Joo Youngcheol),김국원(Kim Kug Weon),권계시(Kwon, Kye-Si) 한국산학기술학회 2009 한국산학기술학회논문지 Vol.10 No.5
본 논문에서는 고압의 유체를 펀치 대신 사용하는 무 펀치 피어싱공정을 통해 얇은 금속 판에 거의 직벽을 가진 구멍을 내기 위한 방법으로 위, 아래 양 방향으로 교번적으로 고압을 가하는 피어싱공정을 제안하고 이를 기존 단 방향 피어싱공정 결과와 비교하였다. 연성파괴이론 중 하나인 Lemaitre 손상이론을 도입하여 두 방법에 따른 절단면의 모양을 수치적으로 얻은 후 이들 간의 차이를 나타내었다. 해석 결과, 양 방향에서 교번적으로 가압한 경우 수직도가 수직선 기준 3.6°정도의 매우 작은 펀치를 보여 단면 형상이 거의 수직으로 나타남을 알 수 있었다. In this work, the punchless piercing process with application of alternate high pressure has been proposed as a method to obtain pierced holes having nearly vertical wall over thin metal plates. The numerical simulation considering Lemaitre damage model has been accomplished for the proposed method. The simulated results have been compared with those by conventional one-way punchless piercing process. It has been revealed that the fractured section made by pressure alternation method shows nearly steep wall where the deviation angle from the vertical line is as small as 3.6°.
선형 격자 형성 방정식을 이용한 직교 격자 형성에 관한 연구
이상욱(S. W. Lee),권장혁(J. H. Kwon),권오준(O. J. Kwon) 한국전산유체공학회 2000 한국전산유체공학회지 Vol.5 No.1
A method of two and three dimensional orthogonal grid generation with control of spacing by using the covariant Laplace equation is presented. An important feature of the methodology is its ability to control effectively the grid spacing especially near the boundaries still maintaining good orthogonality in whole field.<br/> The method is based on the concept of decomposition of the global transformation into consecutive transformation of an approximate conformal mapping and an auxiliary orthogonal mapping to have linear and uncoupled equations. Control of cell spacing is based on the concept of reference arc length, and orthogonal correction is performed in the auxiliary domain.<br/> It is concluded that the methodology can successfully generate well controlled orthogonal grids around bodies of 2 and 3 dimensional configurations.