http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
선형전동기를 적용한 LCD 패널 자동반송용 순환궤도차량 시스템 개발
김원곤,윤종보,박건우,황계호,Kim, Won-Gon,Yun, Jong-Bo,Park, Gun-Woo,Hwang, Gye-Ho 한국반도체디스플레이기술학회 2008 반도체디스플레이기술학회지 Vol.7 No.3
The authors investigated an overhead shuttle (OHS) system for automatic transferring the liquid crystal display (LCD) panels. The constructed tracks of OHS system include the linear and curve regions and have been installed on the ceiling to transfer the cassette of LCD glass along the closed-loop and open-loop tracks. In this study, the OHS system was implemented by a proposed linear motor to solve encoder installation and the system cost problems of the long distance transfer system. In addition, we utilized a new algorithm of the position detection and a new control algorithm for driving linear motor. The newly developed control algorithm was demonstrated from both a computer simulation and an experimentation, indicating that the highly reliable and speedy transfer system can enhance the LCD panel productivity of commercial OHS system.
황계호(Gye-Ho Hwang),윤종보(Jong-Bo Yun),문인호(In-Ho Moon),이봉섭(Bong-Seob Lee) 한국조명.전기설비학회 2011 한국조명·전기설비학회 학술대회논문집 Vol.2011 No.11
태양광 모듈 제조 공정 중 핵심장비인 라미네이터 장비의 기술은 히터 표면 온도의 균일도, 진공도, 압력 제어기술 등을 조합하여 운용하는 기술이 필요하며, 사용자 측면에서 태양광 모듈은 고출력 및 대면적화 되는 추세이다. 따라서 본 논문에서는 이러한 핵심기술을 적용한 라미네이션 장비를 설계, 제작하여 국산화하였으며, 또한, 태양광 모듈의 대면적화에 대응한 대면적(3, 600*2, 100[mm]) 히터 시스템의 설계, 제작, 실험을 통한 결과로 기동 온도 특성이 30분 이내에 목표 온도 지령치에 추종하였으며, 전체 표면온도 균일도에서도 표면온도 지령치에 대한 온도편차가 ±2[℃] 이내로 우수한 특성을 확인 알 수 있었다.
OHS 분기 시스템 적용을 위한 선형전동기에 관한 연구
박건우(Gun-Woo Park),윤종보(Jong-Bo Yun),문인호(In-Ho Moon) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
본 논문은 LCD 생산라인의 물류 자동화 시스템 중 OHS(Over Head Shuttle)을 분기가 되도록 하여, 이송 효율을 높이고, 이송거리를 단축시키기 위한 선형 이송시스템에 적용이 가능한 영구자석 여자 횡자속 선형 전동기 개발에 관한 내용이다. 3차원 FEM 해석과 정특성 실험을 통해 전동기의 특성을 분석하여, 직선-곡선 레일과 분기 구간에서 이송 가능한 횡자속 선형전동기 추진모듈의 사양을 결정하고 시작품을 설계, 제작하여 OHS 시스템 등의 이송시스템에 적용 가능한지 그 타당성을 검토하였다.
김원곤(Won-Gon Kim),윤영민(Young-Min Yun),황계호(Gye-Ho Hwang),백철준(Cheol-Jun Paik),윤종보(Jong-Bo Yun),문인호(In-Ho Moon) 한국조명·전기설비학회 2010 한국조명·전기설비학회 학술대회논문집 Vol.2010 No.9월
Domestic photovoltaic power generation takes a little distribution over other energy resources. But, the government's policy on new and renewable energy has encouraged research on solar cell, solar cell modules, and solar cell power generations. This paper is based on the research of solar cell lamination system, a core manufacturing equipment in solar cell module manufacturing. The research is stated about the core technologies of solar cell lamination system; large surface heating system, vacuum system, pressurizer, and manufacturing process.
황계호(Gye-Ho Hwang),이근선(Gun-Sun Lee),윤종보(Jong-Bo Yun),문인호(In-Ho Moon),이봉섭(Bong-Seob Lee) 한국조명·전기설비학회 2010 한국조명·전기설비학회 학술대회논문집 Vol.2010 No.9월
최근, 박막형 태양전지에 대한 연구는 활발히 진행되고 있지만, 박막형 태양선지 제조장비에 대한 연구는 미흡한 실정이다. 이에 본 논문에서는 박막형 태양선지 제조공정과 제조장비를 파악하고, 기존 Batch타입 제조라인의 카세트 이송 로봇을 국산화와 장비개선을 위해 분석하였으며, 또한, 기존 겐트리 타입 카세트 이송 로봇의 역할, 기능을 파악하여, 새로운 개념과 개선사항을 반영한 arm타입 카세트 이송 로봇과 이 카세트 이송 로봇의 동작을 위한 최적인 전원으로 파티클 발생이 없는 비접촉 전원시스템을 제시하였다.
PV Module 공정용 Lamination system에 관한 연구
황계호(Gye-Ho Hwang),김원곤(Won-Gon Kim),윤영민(Young-Min Yun),백철준(Cheol-Jun Paik),윤종보(Jong-Bo Yun),문인호(In-Ho Moon),신철수(Cheol-Su Shin),김병수(Byong-Su Kim),이봉섭(Bong-Seob Lee) 한국조명·전기설비학회 2010 한국조명·전기설비학회 학술대회논문집 Vol.2010 No.5월
In recent years research on solar cells and modules made active, while solar cells and modules to produce solar power equipment for the research is lacking. Thus In the paper, the key chapter for the production of photovoltaic modules, technical review of lamination system is designed, manufactured and were localized. using lamination system, Photo voltaic module((10×6: 60cell) 3 sheets can be produced simultaneously with multiple defects were studied
Stocker 시스템에 적용한 고효율 비접촉 전원시스템 개발
황계호(Gye-Ho Hwang),김원곤(Won-Gon Kim),윤종보(Jong-Bo Yun),문인호(In-Ho Moon),이봉섭(Bong-Seob Lee),민병재(Byung-Jae Min),김동희(Dong-Hee Kim) 한국조명·전기설비학회 2010 조명·전기설비학회논문지 Vol.24 No.2
최근, LCD(Liquid Crystal Display) 산업에서 클린룸의 규모가 커짐에 따라 Stocker 시스템의 사이즈가 커지고 길이가 장거리화 되고 있다. 이에 제조업체는 생산수율을 높이기 위해 Stocker 시스템의 전체 택타임을 줄이기 위한 방안으로 Stocker 시스템의 속도 증가와 고유가 시대에 여러 장비들에 대한 에너지 절약을 통한 공장 운영비용이 최소화되도록 요구하고 있다. 따라서 본 논문은 차세대 Stocker 시스템의 에너지 절감과 이송 속도증가에 따른 고효율 비접촉 전원시스템(CPS, Contactless Power Supply)의 최적설계를 제안하고, 에너지 절감을 위한 비접촉 전원시스템의 시제품을 제작하여 부하인 크레인의 여러 운전 패턴에 따른 비접촉 전원시스템의 실증시험과 입/출력 특성, 효율 개선에 따른 최적화로 개발된 비접촉 전원시스템의 에너지 절감 효과에 대하여 서술하였다. Recently, As increasing cleanroom size, Stocker system is trending the large size and long distance for LCD material transfer system. In order to rise a rate of production, the manufacturer are on the decrease of total tact time with Stocker system. And the manufacturer are requested to high speed of next generation Stocker system. Also manufacturers for the high oil prices through energy-saving conservation to minimize plant operating costs are required. Therefore, this paper propose optimal design of high efficiency Contactless Power Supply(CPS) system about high speed and energy savings of next generation Stocker system. This paper proposes CPS system is applied in the long distance and straight section with Stocker system for energy savings. The test results of input/output characteristic and efficiency of CPS system on operating pattern of Stocker system were analyzed, and proved the applicability on commercial use.
독립형 태양광 시스템에 적용한 태양광 모듈 시뮬레이션에 관한 연구
황계호(Gye-Ho Hwang),김원곤(Won-Gon Kim),윤종보(Jong-Bo Yun),문인호(In-Ho Moon),이봉섭(Bong-Seob Lee),정도영(Do-Young Jung) 한국조명·전기설비학회 2009 조명·전기설비학회논문지 Vol.23 No.2
본 논문은 일사량과 온도의 조건에 따른 태양전지 셀의 등가회로 모델을 모델링하였고, 이를 바탕으로 제작사의 태양광 모듈을 시뮬레이션하여 비교 검토하였다. 검토결과 태양광 모듈의 사양서와 시뮬레이션 값의 오차율이 낮아 신뢰성을 확보할 수 있었으며, 또한 최적인 태양광 모듈 어레이를 시뮬레이션하여 최적인 태양전지 모듈 어레이의 규모를 선택하여 독립형 태양광 시스템을 구현하였다. 또, 특정지역에 설치시 최적인 출력전력도 시뮬레이션을 통하여 알 수 있었다. This paper presents the equivalent circuit model of solar cell with irradiation and temperature condition. Based on solar cell model, the photovoltaic module specification of manufacturer compare with photovoltaic module simulation and is investigated by simulation results. The obtained results indicate that residual of simulation value and specification value about photovoltaic module is lower. There is considerable validity in simulation of photovoltaic module, Thus, the optimum simulation of photovoltaic module array are studied in this paper. This paper propose the sizing optimization of photovoltaic module array for stand-alone photovoltaic system Also, the proposed stand-alone photovoltaic system is setting in special region(in seoul). This paper presents simulation characteristic of optimization output power in seoul.
독립형 태양광 시스템에 적용한 태양전지 시뮬레이션에 관한 연구
황계호(Gye-Ho Hwang),김원곤(Won-Gon Kim),윤종보(Jong-Bo Yun),문인호(In-Ho Moon),이봉섭(Bong-Seob Lee),정도영(Do-Young Jung) 한국조명·전기설비학회 2008 한국조명·전기설비학회 학술대회논문집 Vol.2008 No.10월
본 논문은 일사량과 온도의 조건에 따른 태양전지 셀의 등가회로 모델을 모델링하였고, 이를 바탕으로 제작사의 태양광 모듈을 시뮬레이션하여 비교 검토하였다. 검토결과 태양광 모듈의 사양서와 시뮬레이션 값의 오차율이 낮아 신뢰성을 확보할 수 있었으며, 또한 최적인 태양광 모듈 어레이를 시뮬레이션하여 최적인 태양전지 모듈 어레이의 규모를 선택하여 독립형 태양광 시스템을 구현하였다. 또, 특정지역에 설치시 최적인 출력전력도 시뮬레이션을 통하여 알아보았다.