http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
기존선 완화곡선부의 승차감을 고려한 틸팅차량의 곡선부 제한속도 평가
엄주환,엄기영,여인호,유영화 한국철도학회 2004 한국철도학회논문집 Vol.7 No.4
The purpose of this paper is to present the alignment layout and the way of modifying transition curve for better operation of tilting trains. It is based on data from field investigation of all curves in conventional line. In general, all curves have transition parts in the beginning and end of the main curve in order to improve the passenger’s comfort. The speed-up of conventional line may need an extention of transition curves. This paper checked out whether the transition curve should be modified or not and how to lengthen it. Then the maximum train speeds in curve prior to and after the modification of transition curve were evaluated.
엄주환,유영화,엄기영 한국철도학회 2003 한국철도학회논문집 Vol.6 No.4
In this paper, the track impact factor of conventional line was evaluated using the data for wheel load measured in field and the properties of current operating trains. The equation for track impact factor was presented through the statistical analysis of variational ratio in wheel load and compared with other design equations in domestic and foreign countries. A review on the safety of track system in conventional line was made from the relationship between the velocity and the corresponding impact factor. It was found that the impact factor from the proposed equation is a little less than the values from the equations adopted in both AREA and domestic railway, while it is same as the equation for continuous welded rail(CWR) in Japan. Therefore it could be said that the track satisfies a criteria for dynamic load caused by the train and the corresponding level of safety is guaranteed for dynamic load of the train
엄주환(Ju-Hwan Um),유영화(Young-Hwa You),엄기영(Ki-Young Eum) 한국철도학회 2003 철도저널 Vol.6 No.4
In this paper, the track impact factor of conventional line was evaluated using the data for wheel load measured in field and the properties of current operating trains. The equation for track impact factor was presented through the statistical analysis of variational ratio in wheel load and compared with other design equations in domestic and foreign countries. A review on the safety of track system in conventional line was made from the relationship between the velocity and the corresponding impact factor It was found that the impact factor from the proposed equation is a little less than the values from the equations adopted in both AREA and domestic railway, while it is same as the equation for continuous welded rail(CWR) in Japan. Therefore it could be said that the track satisfies a criteria for dynamic load caused by the train and the corresponding level of safety is guaranteed for dynamic load of the train
엄주환(Um, Ju-Hwan),최일윤(Choi, Il-Yoon) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.4
철도 선로선형은 한번 건설되면 변경하기가 매우 어렵다. 따라서 철도에서 선로선형의 변경은 일반적으로 큰 경제적 비용을 수반한다. 본 연구에서는 기존 고속철도 및 일반철도의 속도향상을 위한 선형개량 시, 경제성을 고려한 평면선형의 허용개량범위 결정에 설계초기조건(교각)이 미치는 영향에 대해 분석하였다. 분석결과, 교각(Intersection Angle)이 클수록 직 선부에 지장물이 있는 경우가 허용범위에 큰 영향을 미친다는 것을 알 수 있었다. 또한 교각이 클수록 최대 허용곡선반경은 작아지며, 허용완화곡선장은 길어짐을 알 수 있었다. 본 연구를 통해 교각의 크기 및 지장물 위치에 따른 개량허용범위를 쉽게 예상할 수 있으며, 속도향상 및 선로개선을 위한 선형 개량시 지장물을 고려한 경제적 설계가 가능할 것으로 예상된다. The alignment modifications after completion of railway construction entail a lot of efforts and time as well as high additional costs. In the process of renewal of the existing railway alignment to offer higher-speed services, the effect of initial design parameters(e.g., intersection angle) on determination of allowable degree of improvement of horizontal curves under consideration of economic efficiency is investigated in this study. From the analysis results, in the case that there are obstacles at the tangent line, it was found that the larger angle of intersection has a significant effect on the permissible zone. In addition, as the intersection angle is increased, the permissible values of maximum curve radius and the length of transition curve becomes smaller and longer, respectively. It is expected that this study can contribute to the efficient and accurate prediction of the permissible zone according to the locations of obstacles and the size of intersection angle as well as improvement in the railway alignment without any additional costs.
종곡선/평면곡선 경합 시 승차감을 고려한 선형최적화에 관한 연구
엄주환(Ju-Hwan Um),양신추(Sin-Chu Yang),최일윤(Il-Yoon Choi) 한국철도학회 2010 한국철도학회 학술발표대회논문집 Vol.2010 No.7
Superimposition of horizontal and vertical curves may hamper the ride comfort and the running stability of train and largely affect the maintenance cost. However, in many cases, it's not easy to make a track plan because of the fixed points (bridge, tunnel, turnout, catenary system, etc.) to be avoided due to the geographic conditions or to be passed for utilization of existing structures. In this study, when the horizontal and vertical curves are superimposed, in order to optimize the horizontal curve in aspect of the ride comfort , the object function P<SUB>CT</SUB>?was developed and verified by vehicle dynamic analysis. Also, the solution algorithm for simplified evaluation method was presented.