http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신개발된 평데크플레이트(ACE-DECk)를 이용한 합성술래브의 전단거동에 관한 실험적 연구
허병욱,양명숙,배규웅,오상훈,Heo, Byung-wook,Yang, Myung-Sook,Bae, Kyu-woong,Oh, Sang-Hoon 한국강구조학회 2001 韓國鋼構造學會 論文集 Vol.13 No.3
구조용 데크플레이트를 사용한 합성슬래브의 파괴형식 중에서 수평전단파괴는 가장 일반적인 파괴형태로써, 본 논문에서는, 데크 춤 60mm인 신개발된 (ACE-DECK) 합성구조용 평데크플레이트를 개발하여 합성슬래브의 전단거동에 관한 실험적 연구를 수행하였다. 실험체는 데크의 형상, 두께 및 콘크리트의 토핑두께를 변수로 하여 총 22개의 실험체를 제작하여 전단부착성능 실험을 실시하였다. 실험결과, 데크의 두께 및 콘크리트 토핑두께에 따른 합성슬래브의 전단부착성능은 크게 영향이 없는 것으로 나타났고, 신형상(ACE-DECK)의 평데크플레이트는 전단부착응력이 $3.6kgf/cm^2$ 까지 나타나 기존의 평데크 형상에 비교하여 효과적인 전단부착성능을 발휘함을 알 수 있었다. Longitudinal shear failure is the most common failure-type in composite slabs. In this paper, the shear-connection behavior of composite slabs with a particular profiled steel sheeting, so called ACE-DECK, having a depth of 60mm is studied experimentaly. Twenty two pull-out test specimens of different shapes, concrete topping thickness, and different steel sheeting thickness are carried out. It is founded that the shear connection behavior of composite slabs are not affected significantly in the steel sheeting thickness and concrete topping thickness. A new type of profiled steel sheeting is more effective in shear-bond strength that of existing flat-type deck plate, which can offer longitudinal shear strength in composite slope up to $3.6kgf/cm^2$
신형상의 합성용 평데크플래이트(ACE-DECk)의 휨성능에 대한 실험적 연구
오상훈,장인화,배규웅,허병욱,양명숙,Oh, Sang-Hoon,Jang, In-wha,Bae, Kyu-woong,Heo, Byung-wook,Yang, Myung-sook 한국강구조학회 2001 韓國鋼構造學會 論文集 Vol.13 No.3
본 논문은 새롭게 개발된 신형상의 평데크플레이트를 사용한 합성슬래브의 휨성능에 대한 실험적 연구이다. 실험은 데크의 두께, 스팬, 토핑두께 및 단면형상 등을 변수로 하여 총 48개의 합성슬래브 단순휨 실험을 수행하여 휨성능을 평가하였으며 기존형의 절곡형 데크와 비교하였다. 실험결과, 신형상의 평데크플레이트가 기존의 절곡형에 비해서 강도, 초기강상, 평형능력 등에서 매우 우수한 성능을 나타냈으며 휨 강성을 나타내는 유효단면 2차 모멘트값은 기존의 ACI 규준식보다 ASCE 규준식에 보다 일치하는 것으로 나타났다. 실험결과를 내력, 강성 및 변형능력 등으로 구분하여 정리하여 나타냈다. This paper present a study on the flexural behavior of composite slabs using the flat-type profiled(ACE-DECK) steel deck plate which are developed recently. Forty eight composite slabs with different thickness, span, shear span and deck profile were tested to evaluate the flexural capacity and compared to the existing traperzodial deck profiles (KEM, ALPHA-DECK) According to the experiment results, flat-type profiled steel deck plate indicates more excellent capacity than existing traperzodial deck profiles in strength, stiffness, and ductility. The equation proposed by ASCE code for the effective moment of inertia are more acceptable than the equation proposed by ACI code. Thus, in this paper, test results are summarized by strength, stiffness, and deformation capacity for the specimens.
골형 합성 테크플레이트를 사용한 반슬림 합성보의 개발에 관한 실험적 연구
배규웅,오상훈,허병욱,양명숙,Bae, Kyu-Woong,Oh, Sang-Hoon,Heo, Byung-Wook,Yang, Myung-Sook 한국강구조학회 2001 韓國鋼構造學會 論文集 Vol.13 No.1
상업건축물에서 사용이 증가하고 있는 철골조 건물은 일반적으로 콘크리트 바닥 슬래브와 함께 합성거동하도록 설계된다. 현제 "합성 구조"가 사용성 측면에서 경제적이고 작업성이 좋으며, 시공상의 편의성 등의 장점이 있다는 것은 일반화된 사실이지만, 자체의 춤이 깊기 때문에 철골조 아파트에 적용되기에는 어려움이 있다. 따라서 본 연구는 이러한 합성의 전체 춤을 절감할 수 있는 반슬림플로어 시스템을 개발하였다. 본 시스템은 철골보 춤내에 콘크리트 슬래브를 삽입하여 일체화함으로써 철골조 고층건물에서 층고를 최소화 할 수 있는 공법이다. 실험은 12개의 합성슬래브 실험체를 데크현상, 슬래브폭, 스터드볼트의 유무와 콘크리트 토핑두께를 변수로하여 휨성능을 평가하였다. Steel frames are increasingly used in commercial buildings. and most steel frames are designed to achieve composite action with the concrete floor slab. The advantages of 'composite construction' are now well understood in terms of structural economy. good performance in service. and ease of construction. But. these conventional composite construction system are difficult to apply steel framed apartment due to their large depth. So. in this study we developed Semi Slim Floor system which could reduce the overall depth of composite beam. Semi Slim Floor system is a method of steel frame multi-story building construction in which the structural depth of each floor is minimised by incorporating the steel floor beams within the depth of the concrete floor slab. Twelve composite slab specimens with different deck-type. slab width. with or without stud bault and concrete topping thickness were tested to evaluate the flexural capacity.