http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
손영권,윤춘경,김형중,함종화,Son, Yeong-Kwon,Yoon, Chun-Gyeong,Kim, Hyung-Joong,Haam, Jong-Hwa 한국농공학회 2011 한국농공학회논문집 Vol.53 No.6
Long-term water treatment performance analysis was conducted for the constructed wetland treating agricultural tailwater. Studied wetland was established in 2001 and operated from June, 2002 to November, 2010. Wetland vegetation cover was shown over 90 % coverage after 2005. According to vegetation development, accumulation of sediment nutrient was observed; Organic Carbon, T-P and T-N. In addition, DO concentration and temperature was decreased in the constructed wetland output. An infiltration rate also significantly decreased due to compaction of wetland soil. A runoff coefficient was increased due to the low infiltration rate after 2005. A T-N, TSS and Chl.a removal rate was maintained constantly. However, the T-P removal rate was slightly decreased along to wetland operation because low DO concentration could increase elution of phosphorus from sediment. After constructing open water, the T-P removal rate was increased. This is because open water could accelerate the reaearation process. Consequently, over three years of vegetation development could be helpful for wetland performance. In addition, DO concentration is important factor to maintain the T-P treatment.
침투된 지르코니아-뮬라이트 복합체의 미세구조 및 기계적 성질
손영권,이윤복,김영우,오기동,박홍채 한국세라믹학회 2000 한국세라믹학회지 Vol.37 No.2
Y-TZP/mullite composites were prepared by the infiltration of Y-TZP precursor into partially reaction-sintered mullite. The addition of Y-TZP(~7.2 wt%) increased the bend strength(207 MPa), fracture toughness(4.6MPa.m1/2) and Vickers microhardness(853kg/$\textrm{mm}^2$) of the uninfiltrated mullite sintered at 162$0^{\circ}C$ for 10h by more than 75, 70 and 105%, respectively. Residual alumina-rich glass was observed at a mullite/mullite junction, due to the mullitization reaction of silica melt with crystalline $\alpha$-Al2O3 during a final sintering. Although ZrO2 inclusions improved the final sintered density of mullite they did not effectively prevent its grain growth.
손영권,이한필,김해도,최선화,김정대,Son, Yeong Kwon,Rhee, Han-Pil,Kim, Haedo,Choi, Sun Wha,Kim, Jeong Dae 한국농공학회 2015 한국농공학회논문집 Vol.57 No.4
Safety of reclaimed wastewater irrigation needs to be evaluated to promote public health. Quantitative microbial and toxic risk assessment was conducted to identify the level of risk for farmland workers who use reclaimed wastewater and groundwater in Jeju island. Microbial risk through inhalation and ingestion exposure was below acceptable level (less than $10^{-3}$) of $7.07{\times}10^{-6}$ for reclaimed wastewater and $9.99{\times}10^{-8}$ for groundwater irrigation worker. Aggregate exposure risk of Ni, As and Cu was most contributable to overall risk in both reclaimed wastewater and groundwater irrigation plot. High cumulative exposure risk was estimated through non-dietary soil ingestion and dermal contact of soil, due to the high concentration of As, Cu and Ni in farmland soil. Overall toxic risk was $2.68{\times}10^{-4}$ for reclaimed water and $2.39{\times}10^{-4}$ for groundwater irrigation, which could not meet acceptable toxic risk level of $10^{-6}$. Further efforts, such as provide personal protective equipments or public health education, need to be implicated to reduce adverse health risk.
손영권 ( Yeongkwon Son ),윤춘경 ( Chun-gyeong Yoon ),최재호 ( Jae-ho Choi ),이한필 ( Han-pil Rhee ),정지연 ( Jiyeon Jung ) 한국농공학회 2011 한국농공학회 학술대회초록집 Vol.2011 No.-
농경지 비점오염 저감을 위한 인공습지를 효과적으로 설계하기 위해서는 유입수와 유출수의 유량, 수질 및 흐름특성을 고려해야 하며, 획일적인 설계보다는 지역 특성을 충분히 파악하고, 습지 내에서 이루어지는 오염물질의 처리기작을 충분히 반영할 수 있도록 설계되어야 한다. 면적부하율은 일정면적에서 목표수질을 달성하기 위해 최대로 받아들일 수 있는 오염물질의 부하량으로, 이를 이용하여 인공습지의 유량 및 수질조건의 간단한 입력으로 면적을 산정할 수 있다. 개발된 면적산정 프로그램은 충남 당진군 석문면에 위치한 석문시험포에서 2002년부터 2010년까지 장기간 조사된 자료를 바탕으로 면적부하율을 산정하여 주었으며, 평균 및 최대유량, 유입수질 그리고 목표수질을 입력하여 필요한 인공습지의 면적을 계산할 수 있도록 하였다. 체류시간에 따른 인공습지의 수질변화를 살펴보면, TSS의 경우 5 mg/L의 농도까지 감소하는 데 2일의 체류시간이 소요되었으며, 2일 이후에는 농도의 감소폭이 매우 적어졌다. T-P의 경우 약 0.2 mg/L의 농도를 보이는데 5일의 체류시간이 필요한 것으로 측정되었으며, BOD와 T-N은 체류시간이 증가함에 따라 지속적으로 감소하는 경향을 보였다. 종횡비는 단락류(preference flow; short circuiting)를 피하기 위해 1이상으로 설계하는 것이 일반적이며, 큰 종횡비로 설계할 경우 수두손실 또는 유입부에서 배수현상(backwater)과 같은 문제가 생길 수 있다. 개발된 설계방법에서는 가장 일반적인 형태인 3∼5 사이의 값을 제시하고 있으며, 현장에 적용되는 종횡비의 경우에 실제 적용된 부지의 형태에 따라 조정될 수 있다. 개발된 설계공식을 석문시험포의 자료를 이용하여 검증하였다. 입력된 시나리오 값은 인공습지의 평균유량이 250㎥/day이고 체류시간은 5일로 설계하였다. 유입수 평균 BOD 농도는 10 mg/L, 유출수의 목표수질은 BOD 5 mg/L이다.또한 개방수역은 1개소에 설치한다. 평균유량(250 ㎥/day)과 체류시간(5일)을 대입하여 계산한 필요면적은 0.25 ha이다. 이때 습지의 수심은 0.5 m로 계산하였는데, 이것은 일반적인 습지의 수심인 0.3 m와 개방수역의 수심(1.5 m)을 고려한 것이다. 면적부하율 회귀식을 이용하여 BOD 10 mg/L를 5 mg/L로 저감하기 위해 필요한 면적은 0.39 ha로 계산되었다. 계산된 습지면적인 0.39 ha로 체류시간을 다시 산정하면 7.81일을 얻을 수 있으며, 습지의 길이는 108.26∼139.76 m가 적당하다.