http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
BIPV에 활용 가능한 반투명 페로브스카이트 태양전지의 효율 및 내구성에 관한 연구
김수경,김도형,소준영,최동혁,이유선,곽민준,Kim, Su-kyung,Kim, Do-hyung,Soh, Joon-young,Choi, Dong-hyeok,Lee, You-sun,Kwak, Min-jun 한국전력공사 2020 KEPCO Journal on electric power and energy Vol.6 No.2
Regarding greenhouse gas reduction, BIPV (Building Integrated Photovoltaics) is an important technology that can generate its own power in urban buildings based on clean energy resources. In particular, the perovskite material is attracting attention as a BIPV solar cell because it can have various colors and transparency. However, it is not easy to increase both transparency and efficiency factors because solar cell transparency and efficiency are inversely related to each other. Therefore, in this paper, we propose a semi-transparent perovskite solar cell structure that can improve both transparency and efficiency, and evaluate the stability according to international standard. 온실 가스 감축과 관련하여 BIPV (Building Integrated Photovoltaics)는 청정 에너지 자원을 바탕으로 도심의 빌딩에서 자체적으로 전력을 생산할 수 있는 중요한 기술이다. 특히, 페로브스카이트 물질은 투명성을 지니고 있으며, 다양한 색상 구현이 가능하여 BIPV용 태양전지로 주목받고 있다. 그러나 태양전지의 투과도와 효율은 서로 반비례 관계에 있어 두 인자를 모두 높이는 것은 쉽지 않은 과제이다. 따라서 본 논문에서는 투과도와 효율을 모두 높일 수 있는 반투명 페로브스카이트 태양전지 구조를 제안하고, 이를 평가하였으며, 안정성 평가를 위해 국제표준에 따른 내구성 평가를 수행하였다.
박판 자성 재료를 이용한 전력 케이블 인근의 자기장 차폐
김상범(Sang-Beom Kim),소준영(Joon-Young Soh),신구용(Koo-Yong Shin),정진혜(Jin-Hye Jeong),명성호(Sung-Ho Myung) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.7
본 연구에서는 자기장 차폐를 위하여 3상 전력 케이블을 얇은 자성 판재로 둘러싸는 방법을 제안한다. 두꺼운 상용 뮤-메탈, 방향성 및 무방향성 규소 강판을 출발 재료로 하여 두께 0.1 ㎜의 차폐재 3종류를 제조하였다. 3상 전류일 때, 차폐재 위치의 자기장이 100 μT 정도이면 뮤-메탈이(SF<0.1) 가장 효과적이었고, 500 μT 이상이면 규소 강판이(SF 0.3~0.4) 더 효과적이었다. 또한, 안쪽에 방향성 규소 강판, 바깥쪽에 뮤-메탈을 함께 둘러쌀 경우 500 μT까지도 SF를 0.1 이하로 할 수 있었다. 한편, 단상 전류에서는 고 투자율 소재의 적용은 오히려 자기장을 증가시키는 결과를 보였다. 이상의 결과는 자기장 강도 H의 크기에 따라 각 소재의 투자율 우열이 서로 다른 점과 이로 인해 차폐재 내에 유도되는 자기장 벡터와 원래의 자기장 벡터의 상호 상쇄 및 중첩 작용으로 설명할 수 있었다. In this work, wrapping conductors with thin magnetic materials is proposed as a magnetic shielding method. The 0.1 ㎜ thick metal sheets of mu-metal, grain-oriented electrical steel, and non-oriented electrical steel were produced from commercial alloy sheets through cold rolling and followed high temperature annealing. In case of 3-phase electric currents, mu-metal was the best in shielding performance at a B-field magnitude of about 100 μT, whereas silicon steels were better than mu-metal at a B-magnitude over 500 μT. In addition, wrapping with silicon steel(inner) together with mu-metal(outer) resulted in a shielding factor less than 0.1 even at 500 μT. These results are due to changes in hierarchy of magnetic permeabilities of the materials with increasing magnetic field strength. In case of single-phase electric current, B-magnitude outside the magnetic shell was rather increased compared to the unshielded case. This result is explained by vector composition of B-fields near magnetic shielding materials.
극박 방향성 규소강판과 상용 방향성 규소강판의 철손특성 비교
조성수(Seong-Soo Cho),김상범(Sang-Beom Kim),소준영(Joon-Young Soh),채우규,한상옥(Sang-Ok Han) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
Thin-gauged 3% Si-Fe sheets having a high magnetic induction of over 1.9 T have been developed for the purpose of applications where operation frequency is higher than power frequency. In order to clarify requirements of iron loss characteristics for the applications, iron loss characteristics of the newly developed strip were investigated by iron loss separation method and were compared with those of commercially produced 0.3 ㎜-thick electrical sheets. In case of relatively high excitation induction(1.7 T) and low frequency(60 ㎐), reducing hysteresis loss is effective to decrease total iron loss. In case of relatively low excitation induction(1.0 T) and high frequency(1 ㎑), reducing eddy-current loss is effective by decreasing thickness and grain size to improve total iron loss.