http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공공기관의 성과관리가 조직몰입에 미치는 영향: 과업특성의 조절효과를 중심으로
성락훈 ( Rakhoon Sung ),김정수 ( Jungsoo Kim ) 성균관대학교 국정관리대학원 2015 국정관리연구 Vol.10 No.1
본 연구에서는 공공기관의 성과관리가 주관적인 조직효과성인 조직몰입에 미치는 영향에 대해 경험적으로 분석해 보고자 하였다. 그리고 이를 통해 공공기관 내부의 성과관리제도가 적절하게 운영되는지, 또 그것이 조직몰입에 기대한 만큼의 영향을 미치는지를 파악하고자 하였다. 또한 성과관리가 조직몰입에 미치는 영향에 있어서 과업특성이라는 조절변수가 어떠한 영향을 미치는지도 경험적으로 분석하였다. 분석결과 내부성과관리요인과 구성원이해도가 조직몰입에 통계적으로 유의미한 영향을 미치는 것으로 검증되었다. 또한 조절변수의 경우 과업특성 중 목표모호성이 유의미한 영향력이 있는 것으로 나타났다. 이러한 분석결과는 공공기관의 조직몰입을 제고하기 위해서는 조직원이 이해하고 받아들일 수 있는 성과관리 측정지표의 구성과 더불어 보다 명료한 목표의 제시가 중요하다는 것을 시사한다. This study is to analyze the effects of performance management upon organizational commitment in public organizations empirically. And through this, it was to understand the internal performance management system that adequately operated in public organizations, and it was the effects on organizational commitment as expected. Also, it was analyzed the effects between performance management and organizational commitment through task characteristics which is moderating variable empirically. Analysis of internal performance management factors and understanding members were statistically significant impact on organizational commitment and ensure that effective. These results suggest that it is important to present a more clear goals as well as the configuration of the performance management metrics that members understand and accept, in order to improve the organizational commitment in public organizations.
외팔보의 고유진동수 변경을 위한 힌지구속조건 위치선정 방안
성락훈 ( Rock-hoon Sung ) 한국고등직업교육학회 2001 한국고등직업교육학회논문집 Vol.2 No.3
An exact characteristic equation is obtained for the cantilever beam with stopper at auxiliary position. To verify the reliability of the equation, the result is compared the result of clamp-free beam and clamp-hinge beam characteristic equation. In this paper suggested the selecting Technique of hinge constraint location for natural frequency modification on the cantilever beam using presented equation and graphs.
극한값으로부터의 최적화를 이용한 그루브를 통한 표변형상변형 동특성 변경법 검증
박미유(Park, Mi-You),성락훈(Sung, Rock-Hoon) 한국산학기술학회 2009 한국산학기술학회논문지 Vol.10 No.1
구조물 동특성 변경법이란 부가 구조물의 첨가나 삭제, 재료 물성치의 변경, 구조물의 형상변경 등을 이용해 구조물의 동특성을 향상시킬 수 있는 매우 효과적인 방법이다. 하지만 이러한 구조물 동특성 변경법 중 구조물의 형상 변경을 통해 그 구조물의 동특성을 향상시키는 방법은 지금까지는 주로 엔지니어의 경험이나 많은 시간을 요하는 시행착오법에 의존해 왔다. 따라서, 앞선 연구를 통해 이러한 구조물의 형상 변경을 통한 동특성변경법에 있어서 기존의 경험이나 시행착오법에 의존하는 방법이 아닌, 체계화된 방법론을 제안하게 되었으며 하드디스크 드라이브(HDD)에 성공적으로 적용하였다. 제안된 그루브를 통한 표면형상변형 동특성변경법을 검증해 보기 위하여, 본 연구에서는 모든 요소가 엠보싱 되어 있는 극한의 경우로부터 최적화를 수행하고 앞선 연구에서 얻어진 최적화 결과와 비교함으로써 제안된 방법론의 효과를 검토해 볼 수 있었으며, 1차 고유진동수를 높이기 위한 최적화 결과 그루브의 형상은 앞선 연구결과와 같음을 알 수 있었다. Structural Dynamics Modification (SDM) is a very effective technique to improve structure’s dynamic characteristics by adding or removing auxiliary structures, changing material properties and shape of structure. Among those of SDM technique, the method to change shape of structure has been mostly relied on engineer’s experience and trial-and-error process which are very time consuming. In order to develop a systematic method to change structure shape, surface grooving technique is studied and successfully applied to HDD cover model. To verify Surface Grooving Technique, fully embossed HDD cover model was optimized. And comparing with previous optimization result, the effectiveness of this surface grooving technique was checked. The shape of groove and 1st natural frequency were converged to the same result of previous optimization.
박승광 ( S. K. Park ),유수웅 ( S. W. You ),이봉재 ( B. J. Lee ),성락훈 ( L. H. Sung ) 대한내과학회 1972 대한내과학회지 Vol.15 No.2
The purpose of this report is to illustrate the long course and rarity of C.L.L. in Korea. This is the first case of C.L.L. among 107 all leukemia during the past 10 years in National Medical Center. Variation in the incidence of C.L.L. are compared to oth