http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서석호,우완측,이수열,Seo, Sukho,Huang, E-Wen,Woo, Wanchuck,Lee, Soo Yeol 한국재료학회 2018 한국재료학회지 Vol.28 No.7
Fatigue crack growth retardation of 304 L stainless steel is studied using a neutron diffraction method. Three orthogonal strain components(crack growth, crack opening, and through-thickness direction) are measured in the vicinity of the crack tip along the crack propagation direction. The residual strain profiles (1) at the mid-thickness and (2) at the 1.5 mm away from the mid-thickness of the compact tension(CT) specimen are compared. Residual lattice strains at the 1.5 mm location are slightly higher than at the mid-thickness. The CT specimen is deformed in situ under applied loads, thereby providing evolution of the internal stress fields around the crack tip. A tensile overload results in an increased magnitude of the compressive residual stress field. In the crack growth retardation, it is found that the stresses are dispersed in the crack-wake region, where the highest compressive residual stresses are measured. Our neutron diffraction mapping results reveal that the dominant mechanism is by interrupting the transfer of stress concentration at the crack tip.
서석호(Seok Ho SEO),박세승(Sei Seung PARK),이강현(Kang Hyeon RHEE) 한국정보기술학회 2007 Proceedings of KIIT Conference Vol.2007 No.-
본 논문에서는 멀티미디어 신호처리 분야에서 중요한 부분을 차지하고 있는 고속 푸리에 변환(FIT:Fast Fourier Transform) 프로세서를 설계하는 것에 중점을 두었다. 본 논문에서는 64-points FIT(Fast Fourier Transform)프로세서를 R4 SDC(Radix-4 Single Delay path Commutator)-FIT 알고리즘을 기반으로 하는 효율적인 FIT 프로세서 구조를 설계하였다. 기존의 Radix-4 구조에서 복소 곱셈연산을 하기위해 곱셈기 4개와 덧셈기 2개를 필요로 하였지만, 본 논문에서는 이 복소 곱셈을 하는 연산량을 줄이기 위해 DA(Distributed Arithmetic)을 이용하여 기존의 곱셈기를 대신하는 구조를 제안하였다. 제안된 DA 연산구조를 VHDL로 코딩하여 시뮬레이션 한 결과, 곱셈기 구조에 비해서 65.8% 만큼 로직 사이즈가 감소됨을 보였고, 64-points FFT 전체 로직에 대해 VHDL로 코딩하여 시율레이션 한 결과 곱셈기 구조를 사용했을 경우에 비해 전체 로직 사이즈의 30.8%의 감소를 보였다. In this paper, our goal is implementing the 64-points FFT(Fast Fourier Transform) processor. Existent Radix-a SDC(Single Delay path Commutator) consist of two adders and four multipliers to operate complex multiplication but the proposed FFT architecture is applied DA(Distributed Arithmetic) and pipeline structure based on R4 SDC FFT algorithm to reduce multiplication cost. The DA structure executes complex multiplications using ROM and adders without multiplication operation and pipeline structure can reduce operation time. As a results, the proposed FFT architecture decreased logic cell size as 30.8% than the existent radix-a SDC structure.
엔진오일 누유 가시화 및 식별력 증대를 위한 기동화력장비 엔진 공정개선
서석호(Suk Ho Seo),김지훈(Ji Hoon Kim),오대산(Dae San Oh) 한국산학기술학회 2020 한국산학기술학회논문지 Vol.21 No.3
최근 2년간 군 기동화력장비의 엔진 생산 공정 중에 발생한 주요 품질문제 중에는 엔진오일 누유가 가장 많은 비중을 차지하고 있다. 이를 최소화하기 위해서는 엔진오일 누유에 대한 근본적인 원인 파악과 다빈도로 발생되는 누유부위에 대한 파악이 필요할 뿐만 아니라 더 나아가 품질비용 감소를 위해서는 엔진 조립 및 검사공정에서 누유에 대한 사전식별이 필요하다. 본 연구에서는 형광염료가 주입된 엔진오일을 통하여 누유를 가시화하고 엔진오일 누유 현상에 대한 식별성을 증대시켜 군 기동화력장비 엔진의 생산품질을 향상시키고자 하였다. 이를 위하여 기존에 사용하는 엔진오일과 형광염료가 주입된 엔진오일의 특성분석을 통하여 대체 가능성에 대해 검토하였으며 엔진오일 주입 공정과 누유검사 공정을 개선하여 엔진오일 누유에 의하여 발생할 수 있는 정비기간 및 시간을 최소화 시키고자 하였다. 최종적으로 본 연구결과를 토대로 군 기동화력장비 엔진의 신뢰도 확보 및 엔진 생산업체의 품질관리 능력 향상을 통하여 엔진 생산공정간 발생할 수 있는 품질비용을 최소화 시킬 수 있다고 사료된다. Engine oil leaks comprise the largest percentage of the major quality problems that have occurred during the engine production process for military land system equipment over the last two years. To minimize this, it is essential to understand the root cause of the engine oil leakage and perceive the more common leakage area, as well as reduce the quality costs of pre-identification for leaks in the engine assembly process and single items. Therefore, in this study, the mass production quality of engines installed and operated in power equipment was improved by visualizing the engine oil leakage injected with the fluorescent dye and increasing the identification of the engine oil leak phenomenon. For this reason, the possibility of substituting the engine oil was considered and the engine oil was injected with the fluorescent dye. The maintenance was improved by reforming the engine oil injection process and leakage inspection process. Finally, these results suggest that the quality costs between mass production processes can be minimized by ensuring the reliability of military engines by reducing the user"s complaints and improving the quality control capabilities of engine manufacturers.
An Implementation of 64-point FFT circuit of Radix-4 SDC structure Using Distributed Arithmetic
서석호(Seok Ho SEO),이강현(Kang Hyeon RHEE) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.7
In this paper, our goal is implementing the 64 point FFT(Fast Fourier Transform) processor. Existent Radix-4 SDC(Single Delay path Commutator) consist of two adders and four multipliers to operate complex multiplication but the proposed FFT architecture is applied DA(Distributed Arithmetic) and pipeline structure based on R4 SDC FFT algorithm to reduce multiplication cost. The DA structure executes complex multiplications using ROM and adders without multiplication operation and pipeline structure can reduce operation time. As a results, the proposed FFT architecture decreased logic cell size as 30.8% than the existent radix-4 SDC structure.