http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양극성 계면활성제에 의해 표면 전도도가 조절된 탄소나노튜브에 대한 유전영동
홍승현(Seung-hyun Hong),정세훈(Se-hun Jung),김영진(Young-jin Kim),최재붕(Jae-boong Choi),백승현(Seung-hyun Baik) 대한기계학회 2005 대한기계학회 춘추학술대회 Vol.2005 No.11
Dielectrophoresis has received considerable attention for separating nanotubes according to electronic types. Here we examine the effects of surface conductivity of semiconducting single-walled carbon nanotubes (SWNT), induced by ionic surfactants, on the sign of dielectrophoretic force. The crossover frequency of semiconducting SWNT increases rapidly as the conductivity ratio between the particle and medium increases, leading to an incomplete separation of ionic surfactant suspended SWNT at an electric field frequency of 10 ㎒ The surface charge of SWNT is neutralized by an equimolar mixture of anionic surfactant sodium dodecyl sulfate (SDS) and cationic surfactant cetyltrimenthylammonium bromide (CTAB), resulting in negative dielectrophoresis of semiconducting species at 10 ㎒. A comparative Raman spectroscopy study shows a nearly complete separation of metallic SWNT.
급성 골다공증성 요추 골절 환자에서 척추 기립근 및 다열근의 지방침투율과 후만각 변형의 연관 관계
전득수(Deuk Soo Jun),백종민(Jong-Min Baik),백승현(Seung Hyun Baek) 대한정형외과학회 2021 대한정형외과학회지 Vol.56 No.3
목적: 급성 골다공증성 요추 골절 환자에서 척추 변형의 진행을 예측할 수 있는 여러 인자들 중 척추의 자기공명영상 촬영에서 척추 주변 근육의 정량적 분석을 통해 척추 기립근 및 다열근의 감소와 후만각의 변형의 상관관계를 알아보고자 한다. 대상 및 방법: 이 연구는 2007년 1월부터 2018년 3월까지 단일 분절의 급성 요추 골절로 진단되어 보존적 치료 중인 환자를 대상으로 하였다. 다열근 및 척추 기립근의 감소는 지방으로 변성된 비율을 통해 확인하였고 이는 진단 당시 촬영한 요추 자기공명영상 촬영을 사용하여 측정되었으며, 지방으로 변성된 비율은 총 지방 침윤율로 정의하였다. 1년 추적 관찰에서 요추의 측면 방사선 사진에 기초하여 추체 압박률, 콥스각 및 쐐기각을 측정하였다. 피어슨 상관 계수를 분석하여 통계적 유의성을 확인하였다. 결과: 연구 대상은 129명으로 30명은 남자, 99명은 여자를 대상으로 하였다. 평균 연령은 71.28±9.55세, 평균 BMD 점수는 -3.53±0.79 g/cm², 평균 지방 침윤율은 15.20%±11.99%였다. 지방침투율은 수상 당시 나이(R=0.373, p<0.001)와 양의 상관관계가 있었지만, BMD 점수(R=-0.252, p=0.004)와는 음의 상관 관계를 보였다. 1년 후 추적관찰하여 확인한 결과에서 지방 침윤율은 추체 압박률(R=0.369, p<0.001) 및 콥스각(R=0.386, p<0.001)과 양의 상관 관계를 보였다. 요추 골절이 아래 분절로 내려 갈수록 추체 압박률(R=-0.191, p=0.030) 및 후만각(R=-0.428, p<0.001)은 감소하는 경향이 있었다. 결론: 급성 골다공증 요추 골절 환자에서 지방 침윤율은 보존적 치료를 위한 중요한 예측 인자가 될 수 있다. 지방 침윤율이 높은 환자의 예후는 환자 교육 과정에서 설명을 해야 하며 단기 외래 환자 후속 조치를 통해 환자를 면밀한 모니터링이 필요하다. Purpose: Verifying a reliable predictor of the progression of vertebral deformity in patients with acute osteoporotic fractures of the lumbar spine may be useful. A qualitative analysis of the muscle near the spine was performed using magnetic resonance imaging (MRI), and its correlation with a spinal deformity was determined under the hypothesis that the causes of the kyphotic deformity are associated with muscle reduction in the multifidus and erector spinae. Materials and Methods: The study was performed in a retrospective manner using the electronic medical records of patients who presented to the author’s institution between January 2007 and March 2018, and were diagnosed with an acute lumbar fracture. The fat infiltration rates of the multifidus and erector spinae were measured using MRI taken at the time of injury, and the mean value was defined as the total fat infiltration rate (TFI). Based on lateral radiographs of the lumbar spine at the one-year follow-up, the loss of height of the vertebral body, the kyphotic angle and the wedge angle were measured. The statistical significance was confirmed by calculating the Pearson correlation coefficient. Results: One hundred twenty-nine patients, of which 30 were male and 99 were female, were examined. The mean age was 71.28 years. The mean T-score was -3.53±0.79 g/cm², and the mean fat infiltration was 15.20%±11.99%. TFI was positively correlated with age (R=0.373, p<0.001), compression rate (R=0.369, p<0.001), and Cobb’s angle (R=0.386, p<0.001) after a one year follow-up, but negatively correlated with the BMD score (R=-0.252, p=0.004). As the fracture progressed to the lower lumbar level, the compression rate (R=-0191, p=0.030) and wedge angle (R=-0.428, p<0.001) at the time of injury tended to decrease. Conclusion: In patients with osteoporotic vertebral fractures, the fat infiltration rate may be an important predictor of conservative treatment. The prognosis of patients with a high-fat infiltration rate should be explained during patient education, and the patients must be monitored closely through short-term outpatient follow-up.
알루미늄탄소나노튜브 복합재의 가공 방법과 탄소나노튜브 함량에 따른 트라이볼로지 특성
이중희(Jung-Hee Lee),김일영(Il-Young Kim),이규선(Gyu-Sun Lee),백승현(Seung-Hyun Baik),윤정일(Jeong-Il Youn),김영직(Young-Jig Kim),이영제(Young-Ze Lee) 한국트라이볼로지학회 2008 한국윤활학회지(윤활학회지) Vol.24 No.5
Carbon nanotube composite is considered to be a good candidate material for composite material because of its excellent mechanical property and low density under high temperature as well as good wear and frictional properties. In this study, tribological characteristics of carbon nanotube aluminum composite were evaluated using pin-on-disk wear tester. Spark Plasma Sintering method is more effective than Hot Pressing method in terms of wear and friction. The composite with 1% CNT has the lowest friction and wear characteristic.
알루미늄ㆍ탄소나노튜브 복합재의 분산 조건에 따른 마찰 마멸 특성
이중희(Jung-Hee Lee),김일영(Il-Young Kim),이규선(Gyu-Sun Lee),윤정일(Jeong-Il Youn),김영직(Young-Jig Kim),백승현(Seung-Hyun Baik),이영제(Young-Ze Lee) 한국트라이볼로지학회 2008 한국트라이볼로지학회 학술대회 Vol.2008 No.6
To improve a lightweight property and mechanical properties, carbon nanotube-aluminum composites were fabricated using HP(Hot Pressing) method. These composites are fabricated under three different conditions. To know the friction and wear characteristics according to dispersion conditions, the coefficient of friction and the wear rate were evaluated using pin-on-disk tester. And conglomerated CNT particles are observed using SEM(Scanning Electron Microscope). As a result, it was proven that irregular dispersion of CNT leads an increase in friction coefficient and wear rate.