http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
플라이애시 치환 콘크리트의 응결시간 추정시 듀로미터 A 타입 사용가능성 분석
이혁주 ( Lee Hyuk-ju ),백승복 ( Baek Seung-bok ),신용섭 ( Shin Yong-sub ),한민철 ( Han Min-cheol ),한천구 ( Han Cheon-goo ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.2
본 연구에서는 Durometer A타입으로 응결시간에 확실하게 차이를 나타낼 수 있는 플라이애시(이하 FA) 치환 콘크리트에서 프록터 관입저항 시험치와 경도치를 비교 분석하고자 하였다. 연구결과로 프록터 관입저항 시험치와 Durometer A타입의 경도치는 곡선의 형태로 높은 상관관계를 나타내었다. 표면 마감작업에 대하여 Durometer A타입의 경도치로 약 25 HD는 초결, 약 35 HD는 종결로 관리한다면 표면 마감작업시간 판정에 효과적일 것으로 사료된다.
수중 침지 건조방법을 이용한 40 MPa급 Mock-up부재 콘크리트의 화해피해 깊이진단
임군수 ( Lim Gun-su ),백승복 ( Baek Seung-bok ),김종 ( Kim Jong ),한민철 ( Han Min-cheol ),한천구 ( Han Cheon-goo ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 연구에서는 흡수율 차이 원리를 이용하여, 육안으로 판정가능한 수중침지 후 건조법을 중성화 깊이 측정 방법과 비교하여 화재 피해 깊이를 분석하였다. 수중침지 후 건조법은 중성화 측정시험 방법과 동일한 수준의 화해피해 깊이평가가 가능하였고, 더 나아가 본 연구에 의한 방법으로 측정시 페놀프탈레인 방법에 비해 15 mm의 추가적인 피해깊이를 확인할 수 있었다.
CBS Dust 치환 콘크리트의 Durometer를 이용한 응결시간 추정
신세준 ( Sin Se-jun ),이혁주 ( Lee Hyuk-ju ),백승복 ( Baek Seung-bok ),현승용 ( Hyun Seung-yong ),신용섭 ( Shin Yong-sub ),한민철 ( Han Min-cheol ) 한국건축시공학회 2019 한국건축시공학회 학술발표대회 논문집 Vol.19 No.1
In this study, it was intended to confirm the possibility of using the Durometer in estimating the setting time by comparing the Proctor penetration resistance with the Durometer type A of hardness in concrete substituting CBS Dust. With the hardness of Durometer type A, it is expected to be used conveniently in the field of practice as it is determined to be about 18 HD for the initial determination and 31 HD for the end measurement.
CGS를 잔골재로 활용하는 콘크리트의 응결시간 추정시 고무경도계 A타입 사용 가능성 분석
이혁주 ( Lee Hyuk-ju ),한준희 ( Han Jun-hui ),백승복 ( Baek Seung-bok ),신용섭 ( Shin Yong-sub ),한민철 ( Han Min-choel ),한천구 ( Han Cheon-goo ) 한국건축시공학회 2019 한국건축시공학회 학술발표대회 논문집 Vol.19 No.2
In this research, Proctor insertion resistance test values and Durometer A type hardness values were compared and analyzed between the setting times of the concrete using CGS for Fine Aggregate, and the results are summarized as follows. 1) The Proctor penetration resistance test value and the hardness value of Durometer A type showed a high correlation in the form of a curve. 2) About surface finish The resolution exceeding the hardness value of the Durometer A type uses about 25 HD, and in the case of termination, about 35 HD, and is considered to be effective for determining the surface finishing work time. The possibility to do is expected.
CGS 잔골재를 사용한 콘크리트의 응결시간 추정시 듀로미터 사용 가능성 분석
이혁주 ( Lee Hyuk-ju ),한준희 ( Han Jun-hui ),백승복 ( Baek Seung-bok ),신용섭 ( Shin Yong-sub ),한민철 ( Han Min-choel ),한천구 ( Han Cheon-goo ) 한국건축시공학회 2019 한국건축시공학회 학술발표대회 논문집 Vol.19 No.2
In this study, we compared the proctor penetration resistance test value of the concrete using CGS for Fine Aggregate and the hardness value of the Durometer. The results are summarized as follows. 1) Surface finish The Durometer C type setting time measurement value was about 45 HD, and the hardness value of the Durometer D type was about 5 HD. 2) The proctor penetration resistance test value and the hardness value of the Durometer are highly correlated and are expected to be easy to use.