http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
배수호,정영수,박광수,이준구,Bae, Su-Ho,Chung, Young-Soo,Park, Kwang-Su,Lee, Joon-Gu 한국콘크리트학회 1999 콘크리트학회지 Vol.11 No.2
콘크리트의 품질확보와 문제점 해결방안으로서 20세기 전반까지는 주로 시멘트의 종류를 달리하는 경우가 많았으나, 그 후반기부터는 각종 혼화재료를 사용하여 콘크리트의 결점을 보완하고 각종 요구성능에 부응하는 다양한 품질의 콘크리트를 제조하고 있다. 따라서 이같은 다양한 요구에 부응키 위해서는 혼화재료의 사용이 필수적이므로 본 연구에서는 강도증진 및 수화열 저감목적으로 많이 사용되고 있는 실리카흄, 플라이애쉬, 고로슬래그 미분말 및 농업부산물인 왕겨재의 특성을 규명키 위하여 이들을 혼입한 콘크리트에 대해서 단위결합재량별(300~600kg/$m^3$)로 이들 각각의 혼입률에 따라서 시공성 및 강도특성을 분석한 후 각 혼화재의 성능을 발휘할 수 있는 최소 결합재량과 시공성 및 강도특성이 가장 우수한 최적 혼입률 등을 도출하였다. The purpose of this experimental research is to investigate the properties of workability and strength of the concrete containing admixtures such as silica fume, fly ash, ground granulated blast-furnace slag, and rice husk ash. For this purpose, the workability and the strength of the concrete containing each admixture were tested and analyzed according to the unit weight of binder and the replacement ratio of each admixture. As a result, considering their workability and strength, the existence of minimum binder weight and optimum replacement ratio of concrete containing admixture to plain concrete were obtained for each admixture.
산소부화된 난류확산화염에서 TEOS를 이용한 실리카 나노입자의 제조
배수호(Soo Ho Bae),신현동(Hyun Dong Shin) 한국연소학회 2008 KOSCOSYMPOSIUM논문집 Vol.- No.-
Silica nanoparticles were made by gas-to-particle conversion of tetraethylorthosilicate (TEOS) in coflowing turbulent nonpremixed flames with oxygen enrichment. The effects of flame residence time and temperature on the degree of agglomeration and the primary particle diameter of silica nanoparticles were investigated in turbulent nonpremixed flames burner controlled by providing velocity and oxygen enrichment.. The flame length was measured by OH chemiluminescence images using intensified charge-coupled device (ICCD) camera, respectively. The primary particle diameter of silica nanoparticles is quantitatively measured by transmission electron microscopy (TEM). The particle number density, geometric diameter, and standard deviation were measured by scanning mobility particle sizer (SMPS) spectrometer. The adiabatic flame temperature is calculated using CHEMKIN. Flame residence time, primary particle diameter, and geometric mean diameter decrease as fuel velocity increases.