http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김정식(Jeongsik Kim),김효철(Hyochul Kim),김종환(Jonghwan Kim),윤주한(Juhan Youn),김형일(Hyung-il Kim) 한국고분자학회 2017 폴리머 Vol.41 No.5
열분해 반응을 통해 제조된 비극성 폴리에틸렌 왁스에 대해 극성 아크릴산 단량체를 그래프트 반응시켜 기능성 첨가제를 제조하였고, 반응인자가 그래프트 효율에 미치는 영향을 조사하였다. 폴리에틸렌 왁스의 분자량이 작을수록 그래프트율이 증가하였다. 아크릴산 함량이 증가할수록 그래프트율이 증가하였으나 과량의 아크릴산 함량에서는 비극성 반응물과의 혼화성이 불량하여 그래프트율이 감소하였다. 반응시간이 증가하거나 반응온도가 증가함에 따라 폴리에틸렌 사슬에 그래프트 반응활성점이 증가하여 그래프트율이 향상되었다. 개시제로는 반감기가 더 긴 라디칼 개시제가 동일 반응조건에서 더 높은 그래프트율을 나타내었다. 그래프트율이 증가할수록 그래프트 폴리에틸렌 왁스의 유리전이온도는 감소하였다. Functional additives were prepared by grafting polar acrylic acid on nonpolar polyethylene wax which was produced by pyrolysis. The effect of reaction factors on grafting degree was investigated. The grafting degree increased as the molecular weight of polyethylene wax decreased. Although the grafting degree increased as acrylic acid content increased, the grafting degree became lower in case of excess acrylic acid content due to the incompatibility with nonpolar reaction medium. The grafting degree increased as both reaction temperature and reaction time increased because of the increased formation of reaction active sites on polyethylene chains. The radical initiator of longer half life gave the higher grafting degree at the same reaction conditions. Glass transition temperature of grafted polyethylene wax decreased as the grafting degree increased.
스타이렌-무수말레인산 그래프트 반응에 의한 폴리에틸렌 왁스의 극성 특성 향상
김정식(Jeongsik Kim),송지은(Jieun Song),임민지(Minji Im),김효철(Hyochul Kim),김종환(Jonghwan Kim),김형일(Hyung-Il Kim) 한국고분자학회 2018 폴리머 Vol.42 No.4
열분해 반응을 통해 제조된 비극성 폴리에틸렌 왁스에 스타이렌과 무수말레인산 단량체를 그래프트 반응시켜 극성을 가지는 기능성 왁스를 제조하였다. 그래프트 반응 인자에 따라 폴리에틸렌 왁스의 산도 변화를 조사하였다. 무수말레인산 단독으로 그래프트된 폴리에틸렌 왁스보다 스타이렌과 무수말레인산의 교대공중합을 통해 그래프트된 폴리에틸렌 왁스가 월등히 높은 산도를 나타내었다. 또한 가수분해를 추가적으로 진행한 폴리에틸렌 왁스는 산무수 물기의 카복실기 형성으로 더 높은 산도를 보여주었다. 개시제의 분해온도 영향으로 무수말레인산 단독으로 그래프트된 폴리에틸렌 왁스 합성에서는 디큐밀퍼옥사이드 개시제가 더 높은 산도를 나타냈다. 반면, 낮은 반응온도에서스타이렌과 무수말레인산 공중합체가 그래프트된 폴리에틸렌 왁스 합성에서는 벤조일퍼옥사이드 개시제가 더 높은 산도를 나타내었다. Polar functional polyethylene wax was prepared by grafting maleic anhydride and styrene monomers on nonpolar polyethylene wax which was produced by pyrolysis process. The acidity variation of polyethylene wax was investigated depending on the graft reaction variables. The polar functional polyethylene wax, which was prepared by grafting via alternating copolymerization of styrene and maleic anhydride, showed the significantly higher acid value compared to the polyethylene wax grafted with maleic anhydride alone. As the anhydride group of polar functional polyethylene wax was hydrolyzed to form carboxylic acid groups, the acid value of hydrolyzed functional polyethylene wax increased further. Due to the effect of initiator decomposition temperature, dicumyl peroxide resulted in the higher acid value of polyethylene wax in the grafting with maleic anhydride alone. On the other hand, benzoyl peroxide resulted in the higher acid value of polyethylene wax in the grafting with maleic anhydride and styrene together at lower temperature.
전산유체역학(CFD)을 통한 지중점적관수 장치에 따른 압력강하 분석
김정식(Jeongsik Kim),김필(Phil Kim),김설하(Seolha Kim),김진현(Jinhyun Kim),엄덕호(Dukho Um),이상훈(Sanghun Lee) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.11
Watering crops inside the soil is more efficient in terms of water saving than outside watering. To resolve this problem, we use the drip irrigation system which is used the Drip irrigation pipe. This system can save water by evenly supplying water directly into the roots of the crops. To determine which shape has good pressure drop, this study compares the two commercial Drip irrigation pipe and analyzes experiment and computational values through CFD. For calculation through CFD, the shape of the Drip irrigation pipe was produced in CAD based on actual measurement and calculated through ANSYS. Experiment used a water pump and was measured every 20 kPa in the range from 100 to 400 kPa.. This paper reports the advantages and disadvantages of both Drip irrigation pipes.
김정식(Jeongsik Kim),심우찬(Woochan Shim),정재욱(Jaewook Jeong),이홍철(Hongchul Lee),김경운(Kyungwoon Kim),한대곤(Daegon Han) 한국자동차공학회 2011 한국자동차공학회 학술대회 및 전시회 Vol.2011 No.11
To meet stringent diesel particulate matter regulations, diesel particulate filter(DPF) is the best solution. Passive type DPF system is not able to regenerate for low load driving conditions. Therefore, this system is required to forcibly burn the particulate held in the DPF. One effective method of active DPF regeneration is to burn soot by using diesel burner. Although active diesel burner is useful tool to regenerate DPF, there are shortcomings related to ignition. Because ignition is seriously affected by oxygen density which varies with engine load, it is important to know the effect of oxygen density on ignition. In this study, it was found that oxygen density is a main key to start ignition and should be more than 15% for normal ignition of active diesel burner.
실루엣 영상을 이용한 3차원 형상 모델간의 유사도 측정
김정식(Jeongsik Kim),최수미(Soomi Choi) 한국정보과학회 2003 한국정보과학회 학술발표논문집 Vol.30 No.1B
3차원 형상 모델의 비교 연구는 의학, 분자 생물학, 컴퓨터 그래픽스 등의 분야에서 다루게 되는 기본적인 문제들 중의 하나이다. 본 논문에서는 3차원 형상 모델간의 유사성을 측정하기 위한 방법을 제안한다. 본 시스템은 삼각형 메쉬 모델을 유사성 평가에 사용한다. 유사성 비교를 위해 실루엣 영상을 이용하고, 유사 정도의 계산을 위한 측도(metric)로는 부피(Volume), 곡률(Curvature), 직선거리 (Euclidean Distance)를 사용한다. 또한 다양한 방식에 의해 획득된 형상 모델의 비교를 위하여 먼저 포즈 정규화(Pose Normalization)를 한 후 유사성 평가 작업을 수행한다. 본 논문에서 제시한 3차원 형상 비교 시스템은 형상 비교대상들에 대한 전체 변형 및 부분 변형, 그리고 회전 등에 강인함을 보였다.
열분해/그래프팅 연속반응에 의한 아크릴산 변성 폴리에틸렌 왁스 제조
김정식(Jeongsik Kim),송지은(Jieun Song),임민지(Minji Im),박지현(Jihyun Park),김효철(Hyochul Kim),김형일(Hyung-Il Kim) 한국고분자학회 2018 폴리머 Vol.42 No.3
폴리에틸렌 왁스는 여러 산업분야에서 첨가제로 사용되지만 비극성이므로 다양한 소재에 적용하기에는 한계가 있다. 따라서 일반적으로 제조된 폴리에틸렌 왁스에 대해서 극성을 부여하기 위해 후속적인 개질반응이 필요하게 된다. 본 연구에서는 열분해 반응을 통해 제조되는 비극성 폴리에틸렌 왁스에 대해 열분해 반응과 함께 연속적으로 극성 아크릴산 단량체를 그래프트 반응시켜 극성개질의 효율을 향상시키고자 하였다. 아크릴산 단량체의 함량, 첨가 시간 및 반응 시간을 조절변수로 하여 그래프트 효율에 미치는 영향을 조사하였다. 아크릴산 단량체의 함량, 첨가 시간, 반응 시간이 증가할수록 그래프트율이 증가하는 경향을 보였다. 아크릴산 변성 폴리에틸렌 왁스의 그래프트율이 증가할수록 왁스의 연화점이 증가하고 점도는 감소함을 확인하였다. Polyethylene waxes are used as additive in various industrial fields. However, nonpolar polyethylene waxes had some limit in expanded application to various materials due to nonpolar property. Therefore, subsequent modification reaction is usually required for polyethylene waxes to have polar property. In this study, polar polyethylene wax was produced via pyrolysis followed by grafting with acrylic acid in order to improve the polar modification efficiency. Effect of grafting reaction variables such as acrylic acid content, monomer addition time, and graft reaction time on grafting efficiency was studied. Grafting degree increased as acrylic acid content, monomer addition time, and graft reaction time increased. Softening point of grafted wax increased but viscosity of grafted wax decreased as grafting degree increased.
김정식(Jeongsik Kim),김현중(Hyunjoong Kim),최수미(Soomi Choi) 한국정보과학회 2006 한국정보과학회 학술발표논문집 Vol.33 No.2A
본 논문에서는 햅틱 피드백과 스테레오 비쥬얼 큐를 혼합한 다중 감각 기반의 지능형 3차원 형상 분석방법을 소개한다. 지능형 형상 분석 방법은 3차원 모델의 구조에 대한 보다 상세한 정보를 제공한다. 특히 의료 분야에 사용될 경우 전문가의 개입을 최소화하여 질병 진단 및 치료 등에 사용될 수 있다. 본 연구에서는, MRI나 CT 영상으로부터 생성된 3차원 매개변수형 모델을 이용하여 유사 모델 집단을 대표하는 통계 형상을 구축한 후, SVM (Support Vector Machine) 학습 알고리즘을 이용하여 두 집단간 형상 차이를 분석한다. 3차원 형상에 대한 신속한 시각적 이해와 직관적 조작감은 물체 표면의 형상 변화를 분석하는데 효과적으로 사용될 수 있다. 본 논문에서는 물체 조작 및 관찰 등의 작업을 수행할 때, 햅틱 피드백과 스테레오 비쥬얼 큐를 혼합한 인터랙션 기법을 사용하여 공간감과 깊이감을 향상시켜 형상 분석 결과를 효과적으로 분석한다. 본 연구에서는 해마, 관상 동맥, 뇌와 같은 인체 장기를 실험 데이터로 사용하여 제안한 SVM 기반의 분석 방법과 인터랙션 환경의 성능을 평가한다. 본 연구에서 구현한 SVM 기반 이진 분류기는 두 집단간 형상 차이를 효과적으로 분석하며, 또한 다중 감각 인터랙션은 사용자가 분석결과를 관찰하고 카메라 및 형상을 효율적으로 조작하는 데 도움을 준다.