http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고 용융점 소재의 압출적층성형을 위한 우수한 방열특성을 갖는 3차원 프린터 nozzle부 기구설계
김완진(Wan-Chin Kim),이상욱(Sang-Wook Lee) 한국전자통신학회 2020 한국전자통신학회 논문지 Vol.15 No.2
300도 이상의 높은 용융점을 갖는 소위 엔지니어링 플라스틱은 기구적인 강성과 내화학성 및 마찰 및 마모성능이 우수하여 여러 산업에서 금속을 대체하는 소재로 각광받고 있다. 본 연구에서는 용융적층모델링 공법을 기반으로 하는 3D 프린터에서 높은 용융점을 갖는 엔지니어링 플라스틱을 조형할 수 있도록 방열특성이 우수한 3D 프린터 nozzle부의 구조를 설계하고 이를 해석적으로 검증하였다. 높은 온도로 가열되는 heat block과 필라멘트가 이송되는 nozzle상부 간의 단열 및 신속한 냉각을 위하여, 열전도계수가 낮은 열차단부(heat brake부)를 2중으로 구성하였고, 열차단부에 생성되는 열이 냉각핀을 통해 대기에 의해 냉각되는 구조를 적용하였다. 개선된 nozzle부 구조설계를 통해 종래 3D 프린터의 BCnozzle과 비교할 때, heat sink부에서의 온도를 50% 가량 낮출 수 있었으며, heat block에 직접적으로 연결된 heat brake부 최종단의 정상상태 온도를 14% 가량 낮출 수 있었다. Since the engineering plastics having a melting point of higher than 300 degrees have a high mechanical rigidity, chemical resistance, friction and abrasion performance, those are being highlighted as metal replacement materials in various industries. In this study, 3D printer nozzle with excellent heat dissipation characteristics are designed and analytically verified to form engineering plastics with high melting points in 3D printers based on the melt-lamination modeling method. In order to insulate between the heat block heated to a melting point of filament material and the upper part of the nozzle where the filament is transferred, the heat brake part with low thermal conductivity was designed to have two separate parts, and a cooling fin structure is further applied to the heat brake part to lower steady-state temperature by air convection. Optimized structural design on FDM nozzle part reduces the temperature at the heat sink and at the end part of heat brake by 50% and 14% respectively, compared to the conventional BCnozzle structure.
SIL 응용 광 기록계에서 발생하는 위상 및 진폭 Apodization 해석
김완진 ( Wan Chin Kim ),최현,송태선 ( Tae Sun Song ),박노철 ( No Cheol Park ),박영필 ( Youn Gpil Park ) 정보저장시스템학회 2005 추계학술대회논문집 Vol.2005 No.-
In near-field recording (NFR) optics using solid immersion lens (SIL), near-field air gap induces unwanted spherical aberration, defocus and astigmatism. This phenomenon can be explained with the apodization of phase and amplitude between each linearly polarized light. In this paper, we analyzed the effect of phase and amplitude apodization with the fundamental multiple beam interference theory, and we compared resultant diffracted patterns on the image plane for the Si-disk first surface media structure and cover-layer incident media structure.
컴팩트한 Spot형 UV 경화기 광학계를 구현하기 위한 TIR 렌즈 설계 및 응용에 관한 연구
김유림(Yu-Rim Kim),허승예(Seung-Ye Heo),이상욱(Sang-Wook Lee),김완진(Wan-Chin Kim) 한국전자통신학회 2022 한국전자통신학회 논문지 Vol.17 No.2
종래의 spot형 UV경화기는 복수의 렌즈를 이용한 collimator 광학계를 구성하여 광속을 광케이블로 입사하도록 하고 있다. 전달 광 효율을 높이기 위해 3매 이상의 렌즈로 구성된 collimator 광학계가 필요하며 이에 따라 광학계 정렬에 어려움이 있고, 시스템을 컴팩트하게 구현하기 어렵다. 본 연구에서는 3매 렌즈로 구성된 collimator 광학계와 동등한 수준의 스폿 직경 및 광 효율을 구현할 수 있는 단일 TIR 렌즈 collimator 설계하였다. 이를 통해 최소 조도 편차를 갖는 경화 위치에서의 광 효율이 33.2 % 수준으로 참조 collimator 광학계의 성능과 유사한 수준을 확보하였고, 경화면에서의 조도 편차는 18.8 % 수준으로 양호한 성능을 확보하였다. 또한, 이미지 면에서의 조도 평탄화 기능을 갖는 fly-eye lens를 condensing 렌즈 앞단에 배치함으로써, TIR 렌즈만 적용한 경화 광학계와 비교할 때, 유효 경화영역 직경이 5.0 mm에서 3.0 mm 로 줄어 보다 높은 경화 에너지 밀도를 구현할 수 있었으며, 조도 편차는 14.4 % 수준으로 현격히 개선할 수 있음을 확인하였다. The conventional spot-type UV curing machine configures a collimator optical system using a plurality of lenses so that the light beam is incident through an optical cable. In order to increase the transmission light efficiency, a collimator optical system composed of three or more lenses is required, and accordingly, it is difficult to align the optical system, and it is difficult to implement the system compactly. In this study, a single TIR lens collimator that can realize the same level of spot diameter and light efficiency as the conventional collimator optical system composed of three lenses was designed. Through this, the light efficiency at the curing area with the minimum illuminance deviation was 33.2 %, which was similar to the performance of the reference collimator optical system, and the illuminance deviation on the curing area was 18.8 %, ensuring acceptable performance. In addition, by arranging a fly-eye lens with field flattening function at the front end of the condensing lens, the effective curing area diameter was reduced from 5.0 mm to 3.0 mm, enabling higher curing energy density to be realized. In addition, it was confirmed that the illuminance deviation can be greatly improved to a level of 14.4%.