http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김영민,김치경,김태진,Kim, Yeong-Min,Kim, Chee-Kyeong,Kim, Tae-Jin 한국전산구조공학회 2007 한국전산구조공학회논문집 Vol.20 No.6
본 연구에서는 새로운 비선형해석 알고리즘인 적응형 Newton-Raphson 반복기법을 제안한다. 제안된 기법은 기존 Newton-Raphson 기법을 근간으로 적응형 부구조물화 기법을 이용하여 강성등가하중을 구하고, 이미 역행렬이 계산되어 있는 초기강성행렬에 강성등가하중을 적용하여 보정변위를 구하는 것으로 요약된다. 제안된 알고리즘의 가장 큰 특징은 하중 구간의 수에 관계없이 구조물 강성행렬에 대한 역행렬 계산을 단 한번만 수행한다는 것이다. 제안된 기법의 효율성은 강성행렬 및 역행렬 계산 후 부재강성행렬이 변경된 부재들이 연결된 자유도 수와 전체 자유도 수의 비율에 직접 관계된다. 이 비율에 따라 제안된 기법을 기존 비선형해석 기법과 보완적으로 사용함으로써 전체 비선형해석 효율을 향상시킬 수 있다. This paper presents a new nonlinear analysis algorithm, that is, adaptive Newton-Raphson iteration method, The presented algorithm is based on the existing Newton-Raphson method, and the concept of it can be summarized as calculating the equivalent load for stiffness(ELS) and adapting this to the initial global stiffness matrix which has already been calculated and saved in initial analysis and finally calculating the correction displacements for the nonlinear analysis, The key characteristics of the proposed algorithm is that it calculates the inverse matrix of the global stiffness matrix only once irresponsive of the number of load steps. The efficiency of the proposed algorithm depends on the ratio of the active Dofs - the Dofs which are directly connected to the members of which the element stiffness are changed - to the total Dofs, and based on this ratio by using the proposed algorithm as a complementary method to the existing algorithm the efficiency of the nonlinear analysis can be improved dramatically.
서미스터용 Mn-Co-Ni-Fe계 산화물의 조성에 따른 전기저항특성
김영민,임재석,임굉,Kim, Yeong-Min,Im, Jae-Seok,Im, Goeng 배재대학교 공학연구소 2004 공학논문집 Vol.5 No.1
Mn-Co-Ni 3성분계에 Fe의 첨가량을 변화시켜 따른 산화물 서미스터소결체(Mn-Co-Ni-Fe oxide)를 소성온도 1200~$1400^{\circ}C$에서 제조하여 전기저항특성을 조사한 결과, 결정상은 단일입방정 스피넬형 결정구조였고, 소성온도에 따른 전기전도도는 $1300^{\circ}C$에서 4시간 소결한 시미스터가 가장 높았다. 대체로 F-2를 제외하고는 Fe의 첨가량이 증가할 때 비저항은 증가하고 상대적으로 전기전도도는 감소한다. 특히 F-2의 조성에 있어서는 전기전도도가 1.4${\times}$$10^-3$${\ textohm}cm로 높았고 상대적으로 B정수는 2906K로 낮았다. The properties of electrical resistance of Mn-Co-Ni-Fe oxide-based thermistor with various Fe contents in sintering process at $1200^{\circ}$ to $1400^{\circ}C$ for 4 hours in air atmosphere for fabricating thermistor materials were investigated. The results were as follows: all samples showed single cubic spinel crystal structures in all region. The electrical conductivity is the highest thermistor sintered at $1300^{\circ}C$ for 4 hours. In general when the Fe content is increased except F-2, the resistivity increases and relatively the conductivity decreases. Particularly F-2 composition exhibited the highest electrical conductivity (1.4${\times}$$10^-3$${\textohm}cm) and relatively low B constant(2906K)
김영민,Kim, Yeong-Min 한국전자통신연구원 1989 전자통신 Vol.11 No.4
Closed form solution of nonlinear 2-DEG concentration formula is proposed. This allows us to model continuous 2-DEG charge concentration as the function of gate voltage covering subthreshold region of the I-V curves. Comparisons of the Ids-Vgs characteristics and transconductance with the measured data were performed to show the accuracy of the proposed model. This way we have completely closed form I-V characteristics in subthreshold, triode and saturation region incorporating accurate charge control mechanism for HEMTs.
김영민,Kim, Yeong-Min 한국전자통신연구원 1989 전자통신 Vol.11 No.2
Based on the 2-dimensional charge-control simulation[4], a purely analytical model for MODFET's is proposed. In this model, proper treatment of the diffusion effect in the 2-DEG transport due to the gradual channel opening along the 2-DEG channel was made to explain the enhanced mobility and increased thershold voltage. The channel thickness and gate capacitance are experssed as functions of gate vlotage including subthreshold characteristics of the MODFET's analytically. By introducing the finite channel opening and an effective channel-length modulation, the slope of the saturation region of the I-V curves was modeled. The smooth transition of the I-V curves from linear-to-saturation region of the I-V curves was possible using the continuous Troffimenkoff-type of field-dependent mobility. Furthermore, a correction factor f was introduced to account for the finite transtition section forming between the GCA and the saturated section. This factor removes the large discrepanicies in the saturation region fo the I-V curves presicted by existing 1-dimensional models. The fitting parameters chosen in our model were found to be predictable and vary over relatively small range of values.