http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
평판에서의 음향 방사파워와 구면파 모델을 이용한 빔형성 파워와의 비교
김영기,김양한,Kim, Young-Key,Kim, Yang-Hann 한국음향학회 1997 韓國音響學會誌 Vol.16 No.6
빔형성 방법은 측정 범위의 제한에 의해 분해능이 제한되므로, 공간상에 분포되어 있는 소음원에 적용할 경우 소음워싱 형상을 스므딩(smoothing)시켜 표현하는 문제점을 갖게 된다. 특히 기계소음과 같은 저주파수 소음에서는 분해능의 향상이 한계를 갖게 되므로, 빔형성 방법의 적용이 어렵다. 따라서, 본 연구에서는 이러한 빔형성 방법에서의 스므딩 현상과 평판의 음향파워 방사 형태와의 관계를 살펴 봄으로써, 낮은 분해능을 갖는 빔형성 방법의 적용가능성을 보이고자 한다. 이 경우 구면파를 가정한 빔형성 방법의 분해능을 조정하므로써, 빔형성 파워의 형태가 아음속(subsonic) 및 초음속(supersonic) 음향 방사의 형태를 따르는 평판에서의 음향 방사파워의 형태가 됨을 알 수 있으며, 단순지지된 평판의 방사음장에서 이를 수치적으로 확인하였다. Beamforming method has a limited spatial resolution because of finite aperture size, so that the estimated source distributions are smoothed within the resolution. Especially for low frequency noise such as mechanical noise, this limitation often diminishes the direct use of beamforming method. In this study, the relation between smoothed beamforming and radiation power distribution of plate has been addressed. By adjustment of aperture size of array, the smoothed beamforming power shows radiation power distribution of plate. Numerical simulations are carried for simply supported plate.
마이크로콤퓨터를 이용한 다변수 시스템의 적응제어에 관한 연구
김영기,변증남,Kim, Young-Key,Bien, Zeungnam 대한전자공학회 1979 전자공학회지 Vol.16 No.5
전형적인 다변수 화공정시스템을 실제로 구성하고 이 시스템에 대해 종래에 쓰이던 하드웨어 제어기 대신에 마이크로콤퓨터를 써서 제어한 실험연구의 결과를 보고하였다. 특히 시스템에 공급되는 유동의 수압이 강하함으로 인한 시스템특성의 변화에 대해서 유량계를 이용한 적응제어를 시도하여 그 제어성능이 크게 개선되도록 하였다. It is reported that a typical multivariable system of chemical process type was constructed and control experiment was conducted using a $\mu$-computer instead of using conventional hardwave controller. When the pressure of water to be supplied to the multivariable system is varying, an adaptive control method using a flowmeter is suggested to enhance the control performance.
[진동·소음부문] 능동음원 및 벽면 어드미턴스 측정을 통한 실내 소음원 규명
김영기(Young-Key Kim),김양한(Yang-Hann Kim) 한국자동차공학회 1999 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
Nearfield acoustic holography [1. O. Maynard, and et ai, J. Acoust. Soc. Am, 78,1395-1413, 1985] has been used to reconstruct sound fields near sound sources. The reconstructed sound fields show noise source locations in exterior sound fields. However, in enclosures, the reconstructed sound fields generally do not show correct source locations. Since reflections are included in the field, the spatial distribution of reconstructed values does not coincide with source distribution. In this paper, we introduce a method to estimate active sources in enclosures. After eliminating the effect of reflections, we estimate the distribution of the sources that actively radiate sound into enclosures. An in-situ technique to measure surface admittance is also proposed. We use the surface admittance to eliminate the effect of reflections. Numerical simulations and experiments in two-dimensional sound fields verify the method.
김영기(Young-Key Kim),박재규(Chae-kyu Park) 한국인구학회 1997 한국인구학 Vol.20 No.1
본 연구는 한국사회의 산업화과정에서 배제되어 왔던 전북지역에서 직업집단들간에 생활기회가 얼마나 차등적으로 나타나고 있는지 분석하였다. 좀더 구체적으로 본 연구는 6개 직업범주에 속하는 사람들간에 생활기회의 하위영역인 건강상태와 여가생활 각각이 얼마나 차등적으로 나타나고 있는지 분석하였다. 분석결과에 의하면, 직업별로 생활기회가 차등적으로 나타나고 있음을 확인할 수 있었다. 즉 직업적 위세가 높은 직업에 종사하는 사람들이 좀더 좋은 생활기회를 가지고 있으며, 역으로 직업적 위세가 낮은 직업에 종사하는 사람들은 열악한 생활기회를 가지고 있다. 먼저 전문-관리직 종사자들은 모든 영역에서 가장 우수한 생활기회를 누리고 있었다. 그 다음으로 전문 기술직, 사무직, 그리고 판매-서비스직 종사자들이 높은 생활기회를 누리고 있다. 그러나 이들 3개 직업집단들 모두가 모든 영역에서 일치된 생활기회를 가진 것은 아니다. 특히 전문-기술직 종사들은 일의 자율성과 안정성에도 불구하고 작업환경의 열악성과 그것이 건강에 미친 영항을 부정적으로 인식하고 있다. 반면에 판매-서비스직 종사자들은 낮은 사회적 인식에도 불구하고 일의 자율성과 높은 수입 등으로 비교적 높은 생활기회를 누리고 있다. 그러나 농업과 생산직 종사자들은 비교적 열악한 생활기회를 가지고 있다. 특히 농업 종사자들은 여가생활부문을 제외한 다른 부문에서 생산직 종사자들보다 상대적으로 좋은 기회를 가지고 있었다. The main purpose of this study is to describe the different life chances among various occupational groups in Chonbuk Province which has been excluded in the process of Korea's industrialization since the 1960s. More specifically, this study analyzed to what extent 6 occupational groups have the different life chances in the sub-levels such as health conditions and leisure life. According to our data analysis, it is found that the 6 occupational groups have the different life chances. That is, while those who are engaged in the higher prestigious occupation have a good life chance, those who in the lower prestigious occupation have a worse life chance. For example, among 6 occupational groups, professional-managerial who secure the higher autonomy and stability in their work have the highest life chance in the labor and health, and leisure life. Next, professional-technical, white-collar, sales-service occupants have the higher life chance after the professional-managerial. However, these 3 occupation groups are partially inconsistent in the two sectors of the life chance. Specifically, the professional-technical, despite their autonomy and stability in the work world, conceived that their work conditions are worse as well as badly influencing on their own health. On the other hand, the sales-service workers group, despite their lower social status, is relatively autonomous and stable in their work environment and thus has the higher life chances. Finally, agricultural and productive workers have relatively the lower life chances. Nevertheless, there are some clear differences among these 2 occupational groups. That is, the farmers have relatively the higher life chances in the sectors of socio-economic characteristics, and labor and health rather than productive workers. As a result, the productive workers are generally located in the lowest level of life chance. This fact is particularly attributed to the fragility of manufacturing industries in Chonbuk Province.