RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재후보

        하부압입공법에 의한 콘크리트 충전강관(CFT)기둥의 충전특성에 관한 실험적 연구

        김명모,전상우,Kim, Myoung Mo,Jeon, Sang Woo 한국강구조학회 2002 韓國鋼構造學會 論文集 Vol.14 No.2

        To evaluate the applicability of the construction method involving infilling CFT columns by pumping-up, a trial construction was done using 6 actual size test samples. The 12.8m-high test samples were similar to a four-story building scale. The pumping-up level was controlled at 12m. The test used two types of high performance concrete with $450kgf/cm^2$ standard design strength, and a concrete pump which is used domestically. The pressure changes in pipes or pump as well as the changes in concrete characteristics were measured during construction. in order to evaluate applicability. After the concrete hardened, the column was dismantled. The filled state of the concrete, concrete strength distribution according to column height, etc., were checked to evaluate the quality of the concrete, From the results, some basic data which characterize the pumping-up pressure were suggested. Also, the strength of hardened concrete as well as the filled state were proven to be acceptable ranges. 콘크리트 충전강관(CFT) 기둥의 하부압입공법의 시공성을 평가하기 위해 6개의 실대규모 시험체에 대한 시험시공을 실시하였다. 시험체의 규모는 4개층 규모의 12.8m높이로 하여 콘크리트 압입 높이가 12m가 되도록 하였다. 사용된 콘크리트는 설계기준강도 $450kgf/cm^2$ 급의 고성능콘크리트이며 콘크리트 펌프는 국내에서 일반적인 시공시 사용하는 것을 채택하였다. 시공중 배관 및 펌프의 압력변화 특성, 콘크리트의 물성변화 등을 계측하여 시공성을 평가하였고 콘크리트가 굳은 후 기둥을 해체하여 콘크리트의 충전상태, 기둥높이에 따른 콘크리트 강도의 분포 등을 검사하여 콘크리트 품질을 확인하였다. 실험결과로부터 기본적인 압력특성 데이터를 제시하였으며 콘크리트의 충전성과 강도특성도 양호한 것을 확인할 수 있었다.

      • LP강판을 사용한 단순 지지된 판형의 휨 실험

        김명모 위덕대학교 산업기술연구소 2005 산업기술연구소 논문집 Vol.9 No.1

        종방향으로 두께가 연속적으로 변하는 LP강판은 용접부 개소를 줄일 수 있으며 강재 절감의 효과가 있다. 따라서 강재량 감소 및 용접작업 감소에 따른 비용 절감과 구조적인 효율성을 기대할 수 있으므로 유럽에서 처음 개발된 이후 강교량에 적용이 증가하고 있다. 근래에 국내에서도 LP강판이 개발되었으며 그 적용기술의 개발 필요성이 대두되었다. 본 연구에서는 국내에서 생산된 LP강판을 사용하여 판형 시험체를 제작하여 구조성능실험을 수행하였다. Longitudinally profiled steel Plates(LP plates), which have a continuously changing thickness longitudinally, are of such a type of high-performance steel that allows the number of welds and weight of steel to be reduced. Since the first introduction in Europe, LP plates have been used in bridge construction increasingly due to their cost and structural effectiveness. In Korea, recent development of LP plates by POSCO has brought up the domestic need for research in their practical application technologies. In this respect, an evaluation test for LP plates produced in Korea has been carried out to prepare for their applications. In this study, a welded plate girder specimen using LP plate was made and tested to check it's structural performance as a flexural member.

      • 광안대교 교각기초콘크리트의 수화열 해석

        김명모 위덕대학교 산업기술연구소 2004 산업기술연구소 논문집 Vol.8 No.1

        매스콘크리트로 시공되는 광안대교 교각기초 구조물에 대하여 수화열 해석을 수행하여 초기 재령에서의 응력 발생과 온도균열 발생 가능성을 평가하였다. 시공 단계별로 수화열에 의해 발생하는 온도 분포에 따른 온도응력 해석을 수행하였다. 응력해석 결과 각 리프트마다 콘크리트를 일시에 타설할 경우 유해한 균열 발생 가능성이 큰 것으로 나타났다. 따라서 이를 제어하기 위해 콘크리트 타설 시파이프쿨링 공법을 적용해야 하는 것이 권장된다. The main purpose of this study is to evaluate early age thermal stresses and to estimate the risk of thermal cracking in the footings of Kwang-Ahn Grand Bridge. In this study, stress analyses is performed for several construction stages using the computation of temperature distributions. The results of stress analysis show that, not using the embedded pipe cooling, placing the concrete at once for each lifts may cause sever thermal cracking. So, the pipe cooling method was recommended in placing the concrete.

      • KCI우수등재

        개단 강관말뚝의 폐색효과에 대한 모형실험 연구

        김명모,Kim, Myoung Mo 대한토목학회 1987 대한토목학회논문집 Vol.7 No.3

        개단 강관말뚝의 선단지지력은 폐색 효과에 의하여 발생되는데 이 폐색 효과는 말뚝의 직경에 대한 관입깊이의 비 즉, 상대 관입깊이와 밀접한 관계가 있는 것으로 알려져 있다. 이에 본 연구에서는 폐색 효과를 종합적으로 평가하기 위하여 지반의 상대밀도와 모형말뚝의 상대 관입 깊이를 달리하여 재하시험을 수행하였으며 개단 말뚝의 유효직경을 축소시킬 목적으로 십자 모양의 칸막이 판을 선단에 부착한 모형말뚝에 대한 시험도 병행하였다. 그 결과로서 개단 말뚝은 말뚝의 극한 지지력을 기준으로 폐색효과를 평가할 때 말뚝 타설 지반이 단단할수록 작은 상대관입깊이에서 큰 폐색효과를 얻을 수 있으나 100%의 폐색효과는 지반의 상대밀도에 상관없이 대략 상대관입깊이 25 정도에서 발휘된다는 사실을 알았다. 그리고 칸막이 판의 설치로 인한 폐색효과의 증대는 기대하기 어려운 것으로 판단된다. Plugging effect of open-ended pipe piles is known to have a close relationship with the ratio of an embedment depth to a pile diameter, i.e., the relative embedment ratio. To evaluate this relationship in the concrete, load tests are performed on the open and the close ended model piles varying the relative embedment ratio as well as the relative density of the model test ground. Cross-shaped hollow plates are attached at the open pile ends to reduce the effective pile diameters, on which load tests are also performed. As a result, it is confirmed that higher plugging effect may be obtained in the denser ground at lower relative embedment. However, 100% plugging effect can be obtained at the relative embedment ratio of 25 or bigger regardless of the density of the ground. Increment of the plugging effect by introducing the cross-shaped attachment can hardly be achieved.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼