http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김재학 ( Jea-hag Kim ),배철호 ( Cheol-ho Bae ),김정현 ( Jeong-hyun Kim ),신은허 ( Eun-hur Shin ),김경필 ( Kyoung-pil Kim ),구자용 ( Jayong Koo ) 한국수처리학회(구 한국수처리기술연구회) 2018 한국수처리학회지 Vol.26 No.4
The purpose of this study was to investigate the peeling percent, EIS, and neutralization degree of the inner lining and outer coating materials used to protect large diameter steel pipe or cast iron pipe from corrosion. And the service life of the inner lining and outer coating materials were predicted. The results are as follows. First, the peeling percent of the coal-tar enamel lining was estimated to be more than 10% after the age of 15 years or 19 years. And the electro impedance spectroscopy(EIS) was predicted that it reduced under 6 log (/Z/ohm) after 22 years, so that the protection of the pipe surface from corrosion would be lost. On the other hands, the EIS of outer coal-tar enamel coatings was predicted after about 28 years. Second, the epoxy resin lining is expected to have a slightly longer service life compared to inner coal-tar enamel lining, although the years of aging are close to 20 years. The EIS was predicted to be reached at 6 log (/Z/ohm) after at least 60 years. However the relationship coefficient of prediction function was low as 0.11. Third, the cement mortar lining used in ductile iron casting pipe was predicted to lose the function of CML after 40 years at under 450 mm diameter and at least after 60 years over 500 mm diameter.
배·급수관망의 잔류염소 확보를 위한 적정 재염소 주입량 산정 및 효과분석
김도환(Do Hwan Kim),이두진(Doo Jin Lee),김경필(Kyoung Pil Kim),배철호(Chul Ho Bae),주혜은(Hye Eun Joo) 大韓環境工學會 2010 대한환경공학회지 Vol.32 No.10
일반적으로 정수처리 공정에서 염소에 의한 소독공정은 수인성 질병을 억제하고 상수도관망에서 미생물의 재성장을 억제하는 목적으로 사용되고 있다. 그러나 염소소독은 수중의 유기물과 반응하여 소독부산물(Disinfection By-products; DBPs)과 같은 발암성 물질을 생성함으로 적절한 염소 주입이 필요하고 최근에는 관말지역에서의 잔류염소 확보를 위해 상수관로나 배수지 등에서 재염소를 실시하는 경향이 증가하고 있는 추세이다. 따라서 본 연구에서는 정수장에서 최적의 염소주입과 재염소 주입량을 산정하기 위하여 미국 EPA에서 개발한 EPANET 2.0을 사용하여 최적 염소 주입량을 산정하고 그 효과를 모의하였다. 대상지역 상수관로에 대한 수질을 모의하기 위하여 bottle test를 통해 수체감소계수(kbulk)를 도출하였으며, systermatic analysis method를 이용하여 관벽감소계수(kwall)를 도출하였다. 배·급수계통에서의 수질을 정확히 예측하고자 유량과 체류시간 등을 고려한 수리해석 모델을 기초로 하여 상수도관망에서의 잔류염소 농도를 예측하고 염소주입 농도에 따른 소독부산물(DBPs)인 트리할로메탄(Trihalomethanes; THMs)의 생성변화를 실험을 통해 확인하였다. 수체감소계수(kbulk)를 도출한 결과 온도가 높을수록 초기에 빠른 감소를 보였으며, 25℃의 경우 25시간이 지난 이후에는 절반이상이 감소하였다. 대상지역에 재염소 주입시설을 도입할 경우 최적 재염소 주입량을 산정하였으며, 관망도상에서 경제적으로 유리한 지점을 선정할 수 있었다. In general water treatment process, the disinfection process by chlorine is used to prevent water borne disease and microbial regrowth in water distribution system. Because chlorines were reacted with organic matter, carcinogens such as disinfection by-products (DBPs) were produced in drinking water. Therefore, a suitable injection of chlorine is need to decrease DBPs. Rechlorination in water pipelines or reservoirs are recently increased to secure the residual chlorine in the end of water pipelines. EPANET 2.0 developed by the U.S. Environmental Protection Agency (EPA) is used to compute the optimal chlorine injection in water treatment plant and to predict the dosage of rechlorination into water distribution system. The bulk decay constant (kbulk) was drawn by bottle test and the wall decay constant (kwall) was derived from using systermatic analysis method for water quality modeling in target region. In order to predict water quality based on hydraulic analysis model, residual chlorine concentration was forecasted in water distribution system. The formation of DBPs such as trihalomethanes (THMs) was verified with chlorine dosage in lab-scale test. The bulk decay constant (kbulk) was rapidly decreased with increasing temperature in the early time. In the case of 25 degrees celsius, the bulk decay constant (kbulk) decreased over half after 25 hours later. In this study, there were able to calculate about optimal rechlorine dosage and select on profitable sites in the network map.
상수관망 공급능 향상을 위한 제수밸브의 차폐구역을 고려한 다목적 최적설계
유도근(Yoo Do Guen),김경필(Kim Kyoung Pil),박무종(Park Moo Jong),주진걸(Joo Jin Gul) 한국방재학회 2017 한국방재학회논문집 Vol.17 No.2
상수관망 시스템은 충분한 양의 용수를 적절한 수질과 수압으로 안정적으로 소비자에게 공급해야한다. 이를 만족하기 위해서는, 관로 사고 등과 같은 비정상상황에서도 신뢰도 인자 중 하나인 공급성을 충분히 발휘하기 위한 설계가 필요하다. 본 연구에서는 용수공급 안정화를 위한 연계관로 설계문제를 대상으로 관로 공사비를 최소화하는 동시에 관로 사고시에도 공급능이 최대화 될 수 있는 다목적 최적설계 모형을 개발하였다. 이를 위하여 공급능을 정량적으로 산정할 수 있는 신뢰도 인자중 하나인 부족량 기대치를 활용하였으며, 개별 관로의 파손을 해석할 시 실제 밸브 차단에 의해 발생되는 차폐구역인 세그먼트를 고려하여 보다 현실적인 결과를 도출하고자 하였다. 개발된 방법론을 두 개의 상수관망에 적용하여 그 결과를 분석하였다. 개발된 모형은 정상상황시의 최소수압 조건만을 고려하는 현재의 설계기법에 비하여, 비정상상황을 고려함에 따라 미래의 불확실성을 고려할 수 있다는 장점을 가지므로, 향후 다양한 설계인자의 도입시 기초방법론으로 고려할 수 있을 것으로 기대된다. The water supply system should provide a sufficient amount of water to the consumers with adequate water quality and pressure. In order to satisfy this requirement, it is necessary to design the hydraulic system to exhibit sufficient serviceability, which is one of the reliability, even in an abnormal situation such as a pipe accident. In this study, we developed a multi-objective optimal design model that minimizes pipeline construction cost and maximizes supply capacity in case of pipeline accident. To do this, we used the expected water shortage, which is one of the reliability factors that can quantitatively measure the supply serviceability. In analyzing process, segment and unintended isolation were considered to obtain more realistic results under abnormal conditions. The developed methodology was applied to two water networks and the results were analyzed. The developed model has the advantage of considering the uncertainty of the future in abnormal situation compared with the current design method considering only the minimum hydraulic pressure condition in normal situation.