http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
승인돈 대한영상의학회 1986 대한영상의학회지 Vol.22 No.5
Sonographic measurements often give considerable diagnostic significance. However, large discrepancy between the real anatomic sizes and sonographic measurements could cause an incorrect diagnosis. Authors carried out a series of experiment using a phantom and two scanners and the results are as follows : 1. There is a little difference in errors between two scanners, and the measurement does not almost always correspond to the real distance. 2. The rates of errors of the measurements are almost fixed regardless of the positions of the reflectors. 3. There is no relationship between the transducer MHz and error rate. 4. As the error is derived from the scanner electronics it isnecessary to calibrate the scanner periodically, and if not calibrated one should consider the error rate of the scanner inthe anatomical measurement .
건설용 3D 프린팅 기술의 해외 사례 조사 및 국내 상용화 방안
승인배,백효선,박정환 한국산업융합학회 2018 한국산업융합학회 논문집 Vol.21 No.6
3D printing technology in the construction field is currently being developed and commercialized actively in foreign countries, but the development of material and equipment is underway as an initial research stage in Korea. It is necessary to implement commercialization through the introduction of 3D printing technology in the construction field as soon as possible in Korea, but there is no guideline for suitable equipment and materials in Korea at present. Therefore, in order to help prepare for commercialization, it is necessary to provide data such as equipment size and materials suitable for commercialization at the initial stage. This study investigates the types, specifications, and applications of equipment that are being used overseas to provide the equipment type and material cost required in the initial stage of commercialization in Korea. Using the surveyed data, it was possible to calculate the advantages and disadvantages of the equipment type and specification, and the cost of materials used. As a result of the analysis, Gantry type is suitable for the domestic commercialization, and the standard of the output area is 100m² and the extrusion amount of 250m³ / sec is proposed, and the material cost of the commercial product is 20thousand won. The suggestions in this study will help to plan the construction of products and equipments to commercialize 3D printing technology in construction field in the future.
영하온도에서 결합재의 경화시간 및 폴리머 콘크리트의 사용가능시간
승인배 ( In-bae Seung ),최윤상 ( Yoon-sang Choi ),민승호 ( Seung-ho Min ),연규석 ( Kyu-seok Yeon ) 한국농공학회 2012 한국농공학회 학술대회초록집 Vol.2012 No.-
폴리머 콘크리트의 제조에는 에폭시(epoxy), 불포화 폴리에스터(unsaturated polyester, UP), 비닐에스터(vinylester), MMA(methyl methacrylate) 수지 등과 같이 다양한 결합재가 사용된다. 폴리머 콘크리트는 양생 온도에 따라 결합재의 종류에 따라 결합재의 경화시간 및 폴리머 콘크리트의 사용가능시간이 상이하게 나타나므로 현장 적용을 위해서는 이에 대한 연구가 필요하다. 본 연구에서는 영하온도에서 UP, UP-MMA, MMA-PMMA(polymethyl methacrylate), 에폭시, 비닐에스터 등의 결합재에 대한 경화시간과 이들 결합재로 제조된 폴리머 콘크리트의 사용가능시간을 측정하여 비교분석하였다. 폴리머 콘크리트의 경화를 위해 필요한 개시제와 촉진제 등의 첨가량을 달리하고, 양생온도는 0, -10, -20 ℃로 설정하여 시험하였다. 시험결과, 결합재의 경화시간은 0, -10, -20 ℃ 온도에서 UP-MMA, MMA-PMMA 가 10분 이내의 경화반응을 보였다. UP의 경우 0, -10 ℃에서 10분 이내에 경화반응을 보였지만, -20 ℃에서는 20분에 경화반응을 나타냈다. 특히 -10, -20℃에서 재료의 점도가 높아져 작업성이 나빠지는 특징을 보였다. 비닐에스터는 0 ℃에서 30분 이내, -10 ℃에서 60분 이내에 경화반응이 나타났다. -20 ℃에서는 24시간 이내에서는 반응을 보이지 않았다. 에폭시의 경화시간은 0 ℃에서 18시간 이후 경화반응을 보였으나, -10, -20 ℃에서는 비닐에스터와 같이 24시간 이내에 반응을 일으키지 않았다. 폴리머 콘크리트의 사용가능시간은 0, -10, -20 ℃ 온도에서 UP-MMA, MMA-PMMA를 결합재로 사용한 경우가 30분이내였다. UP를 결합재로 사용한 경우는 0, -10 ℃에서 20분 이내로 UP-MMA, MMA-PMMA를 사용한 경우보다 짧았으나, -20 ℃에서는 40분 이내의 사용가능시간을 보여 길게 나타났다. 그러나 -10, -20 ℃에서 결합재의 점도 증가로 작업성이 나빠져 영하온도에서 현장 적용 시 UP-MMA, MMA-PMMA 폴리머 콘크리트에 비해 불리한 것으로 나타났다. 비닐에스터 폴리머 콘크리트의 사용가능시간은 0 ℃에서 40분 정도, -10 ℃에서 120분 정도였으나, -20 ℃에서는 24시간 정도로 길게 나타났다. 에폭시 폴리머 콘크리트의 사용가능시간은 0, -10, -20 ℃ 등 영하온도의 경우 24시간 이상으로 매우 길게 나타나 적용이 어려울 것으로 판단된다.
승인돈 대한영상의학회 1986 대한영상의학회지 Vol.22 No.4
An incidentally detected transposition of the inferior vena cava in patient with gall bladder carcinoma is reported with discussion of findings of CT scan and review of anomalies of the inferior vena cava. Since anomalous vena cava may simulate any other abnormality such as metastatic disease, it is very important to know anomaly of the vena cava with understanding of its embryological background.