http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Measurement of Effective Refractive Index of Nematic Liquid Crystal in Fabry-Perot Etalon
고명옥,전민용,김성조,김종현,이봉원 한국광학회 2015 Current Optics and Photonics Vol.19 No.4
We report a measurement of the effective refractive index of a nematic liquid crystal (NLC) insidea Fabry-Perot (FP) etalon according to the applied electric fields. The effective refractive index of theNLC depends on the intensity of the applied electric field. A wavelength-swept laser with apolygon-scanner-based wavelength filter is used as a wide-band optical source to measure the effectiverefractive index of the NLC. The bandwidth of the optical source is greater than 90 nm around 1300nm. The fabricated NLC FP etalon consists of glass substrates, gold layers as the electrodes with highlyreflective surfaces, polyimide layers as the planar alignment layers, and an LC layer. Furthermore, wemeasured the Freedericksz transition voltages for three types of NLC FP etalons having thicknesses of30.6 μm, 55.4 μm, and 108.8 μm. The Freedericksz transition voltages in the three cases are nearly equal. The measured effective refractive indices in the three cases decreased from 1.67 to 1.51 as the appliedelectric field intensity was increased. Beyond the threshold electric field, the effective refractive indicesquickly decreased and eventually saturated at a value of 1.51 for all cases
다면체 거울 스캐닝 파장 필터를 이용한 파장 훑음 레이저의 출력 특성
고명옥,김남제,한상필,박경현,이봉완,전민용,Ko, Myeong Ock,Kim, Namje,Han, Sang-Pil,Park, Kyung Hyun,Lee, Bong Wan,Jeon, Min Yong 한국광학회 2014 한국광학회지 Vol.25 No.2
본 논문에서는 두 개의 반도체 광 증폭기 (SOA)와 다면체 거울 스캐닝 파장 필터를 이용한 파장 훑음 레이저의 특성을 보고한다. 파장 훑음 레이저의 출력 세기 및 파장 훑음 범위는 레이저 공진기에서 두 개의 SOA와 출력 광 커플러의 위치 및 커플링 비율에 의존한다. 본 연구에서는 크게 두 가지 광 배열에 대해 출력 광 커플러의 커플링 비율을 10%, 30%, 50%, 70%, 90%로 바꾸어 가면서 파장 훑음 속도에 따른 파장 훑음 범위와 광 출력을 비교 분석하였다. 두 SOA 사이에 광 커플러를 둔 최적화된 배열에서 비교적 높은 출력과 넓은 파장 훑음 범위를 얻을 수 있었다. 이 배열에서는 출력 광 커플러의 커플링 비율이 증가함에 따라 광 출력도 증가하는 것을 볼 수 있었다. 이러한 결과는 다면체 거울 스캐닝 필터를 이용하여 파장 훑음 레이저를 제작할 때 최적의 레이저 공진기 구성에 많은 도움이 될 것으로 기대한다. We report the characterization of a wavelength-swept laser (WSL) using a polygon-based wavelength scanning filter and two semiconductor optical amplifiers (SOAs). The output intensity and scanning bandwidth of the WSL depend on the position of the two SOAs in the laser cavity and the coupling ratio of the output fiber coupler. The outputs of the WSL are characterized for coupling ratios of 10%, 30%, 50%, 70%, and 90% for the output fiber coupler. In the setup in which the output fiber coupler is located between the two SOAs, high output power and wide scanning bandwidth can be achieved with an optimized configuration. Using the optimized configuration of the WSL, the intensity increases with the coupling ratio. These results can be used to construct an optimized WSL using the polygon-based wavelength scanning filter.