http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박태조,김경웅 대한기계학회 1988 대한기계학회논문집 Vol.12 No.2
본 연구에서는 필자들의 수치해석방법을 발전시켜 프로파일링을 한 로울러의 프로파일 시작점부근에서의 압력과 유막의 거동을 보다 상세하게 해석하고자 한다.이를 위하여, 수치해석시 로울러 길이방향의 분할을 불균일하게 하여 프로파일 시작점부근에서의 절점의 간격을 조밀하게 하였으며 윤활유의 압축성효과도 고려하였다. A numerical solution of the elastohydrodynamic lubrication problem for an axially profiled cylindrical roller is presented. The problem is analyzed using finite difference method and Newton-Raphson method. The effect of side leakage and compressibility of lubricants are considered and axially nonuniform grid is constructed over the computation zone. Isobars, contours and section graphs show pressure variation and film shape. Contours plot is very similar to the previously reported experimental observations based upon optical interferometry. The maximum pressure and the minimum film thickness occur near the start of the profiling. The method used makes it possible to design an optimum axial profile of the roller to increase the life of rolling bearings.
크롬 도금한 유압 실린더 로드와 시일 사이의 미끄럼접촉 해석
박태조,김민규 사단법인 유공압건설기계학회 2018 드라이브·컨트롤 Vol.15 No.1
The hydraulic cylinder seals are used not only to protect leakage of the working fluids but also to prevent incoming of foreign particles into the system. Chromium plating is generally applied to improve corrosion and wear resistance. It has been noticed that sealing surface damage occurs due to the hard foreign/wear particles contained in the hydraulic oil. In this study, a three-bodied sliding contact problem related with a PTFE seal, a spherical particle and chrome-plated steel substrate is modeled to investigate the relations to wear mechanism. Using the nonlinear finite element software, MARC/MENTAT, the deformed shapes, the von Mises and first principal stress distributions with plating thickness were compared. The sealing surface was mainly abraded by hard particles embedded in the seal. The plastic deformation of the steel substrate decreased with thicker plating. Hence it could be more effective to coat the sealing surface of a hydraulic cylinder with a hard material such as TiN, TiC and DLC.