http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
具泰槿 忠州大學校 1968 한국교통대학교 논문집 Vol.2 No.-
모멘트 분배법이란 탄성영역내에 있는 뼈대에 대한 해석방법을 말하는 것으로 Hardy cross 교수에 의하여 시작된 것이므로 간혹 Hardy cross Method라고도 불러진다. 이 모멘트 분배방법은 여러 개의 절점에 작용을 하는 모멘트가 주어진 하중으로 생기는 모멘트의 진가에 점점 가까이 접근 하게끔 순서대로 행하는 한 Serie의 간단한 단계를 포함한다. 계산 되어진 모멘트는 진모멘트에 보통은 빨리 수험하기 때문에 우리가 원하는 어떤 정도의 정확성을 얻을 수 있는 것이다.
무정전전원장치용 3-레벨 인터리브드 충방전기에 대한 연구
구태근,이인환,조영훈 전력전자학회 2017 전력전자학회 논문지 Vol.22 No.6
This paper proposes a simple 3-level interleaved charger-discharger for the uninterruptible power supply (UPS) with various combinations of battery cells. The proposed converter not only improves charging and discharging efficiency, but also reduces the physical volume and the cost. Furthermore, the converter also offers the capability of the neutral point voltage, so that more stable operation can be obtained. In addition, the proposed converter significantly reduces the ripple current of the battery inductor, thereby providing an expected life extension of the battery. Experimental results for a 300kVA UPS prototype verify the validity of the proposed converter. The proposed charger-discharger is suitable for UPSs and energy storage systems (ESSs) with wide input battery voltage ranges.
온라인 변압기 탭 절환에 의한 고효율 계통연계형 태양광 발전용 PCS
구태근(TaeGeun Koo),송두익(DuIk Song),조정구(JungGoo Cho) 전력전자학회 2009 전력전자학술대회 논문집 Vol.2009 No.1
본 논문은 온라인 변압기 탭 절환에 의한 계통연계형 태양광 발전용 PCS에 관한 것으로, 저주파 변압기로 구성된 절연형 PCS에서 변압기 1차 권선에 탭을 두고 태양전지 출력 전압 크기에 연동하여 탭을 절환함으로써 PCS의 출력전류를 낮게 유지할 수 있는 고효율 PCS를 제안한다. 본 논문에서는 안정적인 온라인 탭 절환과 효율향상의 타당성을 실험을 통해서 검증한다.
460[V]/225[A]/50[kA] 한류형 배선용 차단기 소호부 개발
최영길,구태근,이광식 한국조명전기설비학회 2002 조명·전기설비학회논문지 Vol.16 No.6
배선용 차단기(MCCB)는 신속한 고장전류 차단과 전원시스템의 안정성을 확보하기 위해 배전시스템에 폭넓게 사용되고 있다. 본 논문에서는 MCCB의 소호부 형상에 따른 차단성능을 파악하고 이를 통해 성능향상을 꾀하고자 3차원 자계해석을 이용한 차단성능 평가해석기법을 개발하고, 개발한 평가해석기법을 각 모델 차단기에 적용한 바를 기술하였다. 또한, 소호부내 3분할 다단형 아크런너을 구성하여 불연속 통전경로를 형성함으로 해서 차단성능에 미치는 영향을 살펴보았다. 끝으로, 이상의 연구내용을 토대로 새로운 소호부 형상을 고안하여 국내 최초로 460[V]/225[A]/50[kA] 대전력 단락시험에 성공한 결과를 제시하였다. Low voltage circuit breakers which interrupt rapidly and raise the reliability of power supply are widely used in power distribution systems. In the paper, it has been investigated how much interrupting capability is improved by correcting the shape of the contact system in molded case circuit breaker(below MCCB), especially arc runner. Prior to the interrupting testing, it is necessary for the optimum design to analyze electromagnetic forces on the contact system generated by current and flux density. This paper presents both our computational analysis and test results on contact system in MCCB.