http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Lee, Yun,Choi, Jeong-Il,Kim, Hyeong-Ki,Lee, Bang Yeon ELSEVIER (APPLIED SCIENCE) 2017 COMPOSITE STRUCTURES -BARKING THEN OXFORD- Vol.172 No.-
<P><B>Abstract</B></P> <P>The pore characteristic is a factor that influences on the mechanical properties of composites; the characteristic can be controlled by a defoamer. This paper presents an experimental study on the effect of a defoamer on the compressive strength and tensile behavior of alkali-activated slag-based cementless composite reinforced by polyethylene fiber. Three types of mixtures were made according to the amount of defoamer and the compressive strength, tensile behavior, density, and pore size distribution were measured. Test results show that the compressive strength and tensile behavior of the alkali-activated slag-based polyethylene fiber reinforced composite investigated in this study can be improved by including a small amount of defoamer in the composite.</P>
이방연(Lee, Bang Yeon),최정일(Choi, Jeong-Il),김영석(Kim, Young-Suk) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.8
본 연구의 목적은 폴리에틸렌섬유로 보강한 무시멘트 복합재료의 인장 거동을 실험적으로 조사하는 것이다. 폴리에틸렌섬유 보강 무시멘트 복합재료의 성능을 평가하기 위하여 4가지 배합을 결정하였다. 물/결합재비는 0.30에서 0.38이며,폴리에틸렌섬유의 혼입량은 부피비로 1.75 %이다. 일축 인장 실험, 밀도 실험, 압축강도 실험 등 일련의 실험을 수행하였으며, 실험결과 본 연구에서 조사한 폴리에틸렌섬유 보강 무시멘트 복합재료는 기존 복합재료에 비하여 높은 인장강도와 높은 연성 등 전반적으로 우수한 인장 성능을 나타내었다. This study investigated experimentally the tensile behavior of polyetylene fiber-reinforced cementless composite. Four types of polyetylene fiber-reinforced cementless composite were designed. The water to binder ratio was 0.30-0.38, and the amount of polyetylene fiber was 1.75 vol%. A series of experiments including uniaxial tension, density, and compression tests were performed to evaluate the performance of the composites. From the test results, it was exhibited that the composite has superior tensile performance such as high tensile strength and tensile strain capacity compared with other types of composites.
초고성능 콘크리트와 고연성 무시멘트 복합재료의 압축 및 인장성능
최정일,박세언,이방연 한국구조물진단유지관리공학회 2017 한국구조물진단유지관리공학회 논문집 Vol.21 No.3
초고성능 콘크리트와 고연성 무시멘트 복합재료는 높은 압축강도 및 높은 연성 등 재료의 우수한 성능으로 인하여 유망한 건설재 료로 분류되고 있다. 이 연구의 목적은 초고성능 콘크리트와 고연성 무시멘트 복합재료의 압축강도와 인장거동에 대하여 실험적으로 조사하 여 성능을 비교하는 것이다. 이를 위하여 밀도, 압축강도, 일축인장실험 등 일련의 실험을 수행하였다. 실험결과 알칼리 활성 슬래그 기반 고연 성 무시멘트 복합재료의 압축강도와 인장강도는 초고성능 콘크리트의 압축강도와 인장강도에 비하여 낮게 나타났지만, 인장하중 하에서 알칼 리 활성 슬래그 기반 고연성 무시멘트 복합재료의 인장변형성능 및 인성은 초고성능 콘크리트의 인장변형성능 및 인성에 비하여 높은 것으로 나타났다. 또한 알칼리 활성 슬래그 기반 무시멘트 페이스트에 폴리에틸렌섬유를 보강하여 7.89 %에 달하는 높은 인장변형성능을 확보할 수 있는 것으로 나타났다. Ultra-high performance concrete and high ductile cementless composite are considered as promising construction materials because those exhibits higher performance in terms of high strength and high ductility. The purpose of this study is to investigate experimentally the compressive strength and tensile behavior of ultra-high performance concrete and high ductile cementless composite. A series of experiments including density, compressive strength, and uniaxial tension tests were performed. Test results showed that the compressive strength and tensile strength of alkali-activated slag based high ductile cementless composite were lower than those of ultra-high performance concrete. However, the tensile strain capacity and toughness of alkali-activated slag based high ductile cementless composite were higher than those of ultra-high performance concrete. And it was exhibited that a high ductility up to 7.89% can be attainable by incorporating polyethylene fiber into the alkali-activated slag based cementless paste.
Tensile strain-hardening behaviors and crack patterns of slag-based fiber-reinforced composites
Kwon, Seung-Jun,Choi, Jeong-Il,Nguyen, Huy Hoang,Lee, Bang Yeon Techno-Press 2018 Computers and Concrete, An International Journal Vol.21 No.3
A strain-hardening highly ductile composite based on an alkali-activated slag binder and synthetic fibers is a promising construction material due to its excellent tensile behavior and owing to the ecofriendly characteristics of its binder. This study investigated the effect of different types of synthetic fibers and water-to-binder ratios on the compressive strength and tensile behavior of slag-based cementless composites. Alkali-activated slag was used as a binder and water-to-binder ratios of 0.35, 0.45, and 0.55 were considered. Three types of fibers, polypropylene fiber, polyethylene (PE) fiber, and polyparaphenylene-benzobisethiazole (PBO) fiber, were used as reinforcing fibers, and compression and uniaxial tension tests were performed. The test results showed that the PE fiber series composites exhibited superior tensile behavior in terms of the tensile strain capacity and crack patterns while PBO fiber series composites had high tensile strength levels and tight crack widths and spacing distances.
섬유의 형상비에 따른 고연성 무시멘트 복합재료의 인장특성
최정일(Jeong-Il Choi),박세언(Se Eon Park),강수태(Su-Tae Kang),오성우(Sungwoo Oh),이방연(Bang Yeon Lee) 한국건설순환자원학회 2018 한국건설순환자원학회 논문집 Vol.6 No.3
이 연구의 목적은 폴리에틸렌 섬유의 형상비에 따른 알칼리활성 무시멘트 복합재료의 압축강도와 인장거동을 실험적으로 조사하는 것이다. 이를 위하여 섬유의 형상비에 따라 두 가지 배합을 결정하였고, 압축강도를 측정하고 인장실험을 수행하였다. 실험결과 섬유의 형상비에 따른 압축강도의 영향은 거의 나타나지 않은 반면 인장거동은 큰 차이가 발생하였다. 형상비가 높은 섬유를 사용한 배합은 형상비가 낮은 섬유를 사용한 배합에 비하여 강도, 변형성능, 균열개수가 크게 나타났다. 반면에 균열간격과 균열폭은 높은 형상비를 갖는 섬유를 함유한 배합에서 작게 나타났다. The purpose of this study is to investigate experimentally the effects of aspect ratio of polyethylene fiber on the compressive strength and tensile behavior of alkali-activated cementless composite. Two mixtures were determined according to aspect ratio values of polyethylene fibers, and the compressive strength and tension tests were performed. Test results showed that the effect of aspect ratio of fiber on the compressive strength was negligible and the tensile strength, ductility, and number of cracks of the mixture including the fiber with high aspect ratio were higher than those of the mixture including the fiber with low aspect ratio. On the other hand, the crack spacing and crack width were low in the mixture including the fiber with high aspect ratio.
나트륨계 알칼리 활성화제 조합에 따른 섬유보강 무시멘트 복합재료의 압축 및 인장특성
최정일(Jeong-Il Choi),박세언(Se-Eon Park),이방연(Bang-Yeon Lee) 한국건설순환자원학회 2017 한국건설순환자원학회 논문집 Vol.5 No.1
이 연구의 목적은 알칼리 활성화제의 종류와 양생방법에 따라 나타나는 고로슬래그 기반 섬유보강 복합재료의 압축강도 및 인장거동에 대해 실험적으로 조사하는 것이다. 이를 위하여 알칼리 활성화제 2종류의 배합과 2가지 양생방법을 결정하였고, 밀도 실험, 압축강도 실험과 일축인장 실험을 수행하였다. 실험 결과, 규산나트륨을 사용한 경우 수산화칼슘과 탄산나트륨을 혼합하여 사용한 경우에 비하여 강도, 인장변형성능, 인성 측면에서 우수한 것으로 나타났으며, 활성화제 종류에 따라 양생방법에 의한 영향이 다르게 나타나는 것을 확인하였다. The purpose of this study is to investigate experimentally the effect of types of alkali-activators and curing conditions on the compressive and tensile behavior of fiber-reinforced cementless composites. Two types of alkali-activators and two curing conditions were determined and density test, compressive strength test, and uniaxial tension test were performed. Test results showed that the cementless composite with sodium silicate showed higher performance in terms of strength, tensile strain capacity, and toughness than that with calcium hydroxide and sodium carbonate. The effect of curing conditions depends on the types of alkali-activators.
산업부산물 바인더와 산업부산물 골재 기반 탄소중립형 고인성 무시멘트 복합체
주수환 ( Ju Suhawn ),강민창 ( Kangminchang ),표석훈 ( Pyo Sukhoon ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.1
본 연구에서는 바텀애시와 폴리에틸렌 섬유를 혼입하여 고로슬래그 기반의 탄소중립형 고인성 무시멘트 복합체를 개발하였다. 고인성 무시멘트 복합체의 인장성능과 지속가능성을 향상시키기 위해 전처리된 바텀애시와 폴리에틸렌 섬유를 사용하 였으며, 바텀애시는 선행연구를 바탕으로 전처리되었다. 선행연구의 기법을 통해 알칼리 활성화제의 실리카 공급원으로 바텀애시를 활용할 뿐만 아니라 잔류된 바텀애시를 잔골재로 대체하여 천연골재가 사용되지 않은 탄소중립형 고인성 무시멘트 복합체를 제작하였다.
폴리에틸렌 섬유 종류에 따른 고로슬래그 기반 무시멘트 복합재료의 역학특성
진정언,최정일,박세언,이방연 한국건설순환자원학회 2022 한국건설순환자원학회 논문집 Vol.10 No.3
이 연구의 목적은 인장강도 및 형상비가 다른 폴리에틸렌 섬유가 무시멘트 복합재료의 인장거동에 미치는 영향을 실험적으로조사하는 것이다. 이를 위하여 섬유 종류 및 물-결합재비를 달리한 세 가지 배합을 준비하였고, 밀도 실험, 압축강도 실험및 일축인장 실험을 수행하였다. 실험결과 유사한 화학구조를 갖지만 인장강도가 10 % 낮고, 형상비가 8.3 % 높은 폴리에틸렌섬유를 사용한 경우 복합재료의 인장변형성능과 인성이 각각 11.7 %와 12.4 % 높고 균열폭은 9.1 % 작은 성능을 나타내었다. 또한 동일한 폴리에틸렌 섬유를 사용한 경우 물-결합재비가 증가하여 복합재료의 강도가 낮지만 인장변형성능과 균열패턴이향상될 수 있는 것으로 나타났다.