불투과 잠제 전면에서 파랑 작용 하의 세굴 해석을 위한 수치모델의 개발

허동수(Hur,Dong-Soo),전호성(Jeon,Ho-Seong) 대한토목학회 2011 대한토목학회논문집 B Vol.31 No.5B

본 연구에서는 잠제 주변의 세굴 및 퇴적현상을 수치적으로 모의하기 위해 기존의 수치 파동 모델에 모래입자의 거동 해석을 위한 lagrangian 입자 모델을 결합한 새로운 수치모델을 개발하였다. 수치 피동 모델로서는 파랑에 의한 해저지반 내의 모래입자의 이동과 유동화 해석을 위해 투수성 매체 내부의 유체저항(관성저항, 층류저항 및 난류저항)을 고려할 수 있는 수치모델에 LES 난류모델을 도입한 수치해석기법(허와 최, 2008)을 이용하였다. 또한, 모래입자의 이동해석을 위한 lagrangian 입자 모델로서는 많은 개개의 입자들의 동적해석에 탁월한 개별요소법(Cundall and Strack, 1979)을 적용하였다. 개발된 해석기법을 이용하여 불투과 잠제 전면의 세굴에 대한 수치시뮬레이션을 실시한 후, 기존의 수리모형실험과 정성적으로 비교하면서 그 적용성을 검토하였다. In this study, the coupled-numerical model has been newly developed to investigate numerically scouring and deposition around a coastal structure like a submerged breakwater using a numerical wave model and a lagrangian particle model for sand transport. As a numerical wave model, LES-WASS-2D (Hur and Choi, 2008) is adopted. The model is able to consider the flow through a porous midium with inertial, laminar and turbulent resistance term and determine the eddy viscosity with LES turbulence model. Distinct element method (Cundall and Strack, 1979), which is able to apply to many dynamical analysis of particulate media, as a lagrangian particle model for sand transport is newly coupled to the numerical wave model. The numerical simulation has been carried out to examine the scour problem in front of an impermeable submerged breakwater using the newly coupled-numerical model. The numerical results has been compared qualitatively with an existing experimental data and then its applicability has been discussed.

초고해상도 둥지격자 수치모델을 이용한 울릉도-독도 해역 해양순환 모의

김대혁(Daehyuk Kim),신홍렬(Hong-Ryeol Shin),최민범(Min-bum Choi),최영진(Young-Jin Choi),최병주(Byoung-Ju Choi),서광호(Gwang-Ho Seo),권석재(Seok-Jae Kwon),강분순(Boonsoon Kang) 한국해안해양공학회 2020 한국해안해양공학회 논문집 Vol.32 No.6

지역해양수치모델(ROMS)을 이용하여 동해 및 울릉도-독도 해역의 해양순환을 모의하였다. 동해 3 km 격자 수치모델과 HYCOM 9 km 격자 자료를 사용하여 울릉도 1 km 격자 수치모델, 울릉도-독도 300 m 격자 수치모델들을 서로 단방향 둥지격자화 기법으로 구축하였다. 그 과정에서 상위모델과는 다른 수심 자료 및 내·외삽 방법에 의해 나타날 수 있는 개방 경계자료의 왜곡에 대한 보정방법을 제시하였다. 구축한 시스템을 이용하여, 2018년 울릉도-독도 지역에서 수평해상도가 300 m인 초고해상도 해양순환 모의 결과를 산출하였다. 초고해상도 수치모델은 같은 조건임에도 불구하고 초기장 및 개방 경계자료에 따라 서로 다른 특징이 나타났다. 따라서 수치모델 결과를 인공위성 고도계 자료로 추정한 유속 자료 및 국립수산과학원의 수온 관측자료를 사용하여 비교 검증하였다. 검증결과 HYCOM 자료를 경계장으로 사용한 둥지격자기법 결과는 1km 격자모델 보다 300 m 격자모델 결과에서 RMSE, Mean Bias, Pattern Correlation, Vector Correlation이 전반적으로 향상되었다. 그러나 동해 3 km 수치모델을 사용한 결과에서는 1 km 모델의 결과가 300 m 결과보다 우수하게 나타났다. 수온 수직단면도에서는 수평해상도가 고해상도 일수록, 등온선의 골과 마루의 수직구조가 뚜렷해지는 경향이 나타났다. 또한 울릉도-독도 300 m 모델은 상위모델에서 재현되지 않았던 섬의 지형 효과에 따른 카르만 와열이 나타났다. The ocean circulation was simulated in the East Sea and Ulleungdo-Dokdo region using ROMS (Regional Ocean Modeling System) model. By adopting the East Sea 3 km model and the HYCOM 9 km data, Ulleungdo 1 km model and Ulleungdo-Dokdo 300 m model were constructed with one-way grid nesting method. During the model development, a correction method was proposed for the distortion of the open boundary data which may be caused by the bathymetry data difference between the mother and child models and the interpolation/extrapolation method. Using this model, a super-high resolution ocean circulation with a horizontal resolution of 300 m near the Ulleungdo and Dokdo region was simulated for year 2018. In spite of applying the same conditions except for the initial and boundary data, the numerical models result indicated significantly different characteristics in the study area. Therefore, these results were compared and verified by using the surface current data estimated by satellites altimeter data and temperature data from NIFS (National Institute of Fisheries Science). They suggest that in general, the improvement of the one-way grid nesting with the HYCOM data on RMSE, Mean Bias, Pattern correlation and Vector correlation is greater in 300 m model than in the 1 km model. However, the nesting results of using East Sea 3 km model showed that simulations of the 1 km model were better than 300 m model. The models better resolved distinct ridge/trough structures of isotherms in the vertical sections of water temperature when using the higher horizontal resolution. Furthermore, Karman vortex street was simulated in Ulleungdo-Dokdo 300 m model due to the terrain effect of th islands that was not shown in the Ulleungdo 1 km model.

Validation of a 750 kW semi-submersible floating offshore wind turbine numerical model with model test data, part II: Model-II

Kim, Junbae,Shin, Hyunkyoung The Society of Naval Architects of Korea 2020 International Journal of Naval Architecture and Oc Vol.12 No.1

Floating Offshore Wind Turbines (FOWT) installed in the deep sea regions where stable and strong wind flows are abundant would have significantly improved energy production capacity. When designing FOWT, it is essential to understand the stability and motion performance of the floater. Water tank model tests are required to evaluate these aspects of performance. This paper describes a model test and numerical simulation for a 750-kW semi-submersible platform wind turbine model-II. In the previous model test, the 750-kW FOWT model-I suffered slamming phenomena from extreme wave conditions. Because of that, the platform freeboard of model-II was increased to mitigate the slamming load on the platform deck structure in extreme conditions. Also, the model-I pitch Response Amplitude Operators (RAO) of simulation had strong responses to the natural frequency region. Thus, the hub height of model-II was decreased to reduce the pitch resonance responses from the low-frequency response of the system. Like the model-I, 750-kW FOWT model-II was built with a 1/40 scale ratio. Furthermore, the experiments to evaluate the performance characteristics of the model-II wind turbine were executed at the same location and in the same environment conditions as were those of model-I. These tests included a free decay test, and tests of regular and irregular wave conditions. Both the experimental and simulation conditions considered the blade rotating effect due to the wind. The results of the model tests were compared with the numerical simulations of the FOWT using FAST (Fatigue, Aerodynamics, Structures, and Turbulence) code from the National Renewable Energy Laboratory (NREL).

Validation of a 750 kW semi-submersible floating offshore wind turbine numerical model with model test data, part II: Model-II

Kim, Junbae,Shin, Hyunkyoung The Society of Naval Architects of Korea 2020 International Journal of Naval Architecture and Oc Vol.12 No.-

Floating Offshore Wind Turbines (FOWT) installed in the deep sea regions where stable and strong wind flows are abundant would have significantly improved energy production capacity. When designing FOWT, it is essential to understand the stability and motion performance of the floater. Water tank model tests are required to evaluate these aspects of performance. This paper describes a model test and numerical simulation for a 750-kW semi-submersible platform wind turbine model-II. In the previous model test, the 750-kW FOWT model-I suffered slamming phenomena from extreme wave conditions. Because of that, the platform freeboard of model-II was increased to mitigate the slamming load on the platform deck structure in extreme conditions. Also, the model-I pitch Response Amplitude Operators (RAO) of simulation had strong responses to the natural frequency region. Thus, the hub height of model-II was decreased to reduce the pitch resonance responses from the low-frequency response of the system. Like the model-I, 750-kW FOWT model-II was built with a 1/40 scale ratio. Furthermore, the experiments to evaluate the performance characteristics of the model-II wind turbine were executed at the same location and in the same environment conditions as were those of model-I. These tests included a free decay test, and tests of regular and irregular wave conditions. Both the experimental and simulation conditions considered the blade rotating effect due to the wind. The results of the model tests were compared with the numerical simulations of the FOWT using FAST (Fatigue, Aerodynamics, Structures, and Turbulence) code from the National Renewable Energy Laboratory (NREL).

An Accurate Numerical Model Simulating Hysteretic Behavior of Reinforced Concrete Columns Irrespective of Types of Loading Protocols

Chang Seok Lee,Sang Whan Han 한국콘크리트학회 2021 International Journal of Concrete Structures and M Vol.15 No.1

In older reinforced concrete (RC) buildings, columns are fragile elements that can induce collapse of entire buildings during earthquakes. An accurate assessment of the seismic vulnerability of RC buildings using nonlinear response history analyses requires an accurate numerical model. The peak-oriented hysteretic rule is often used in existing numerical models to simulate the hysteretic behavior of RC members, with predefined backbone curves and cyclic deterioration. A monotonic backbone curve is commonly constructed from a cyclic envelope. Because cyclic envelope varies according to loading protocols, particularly in a softening branch, it is difficult to obtain a unique backbone curve irrespective of loading protocols. In addition, cyclic deterioration parameters irrespective of loading protocols cannot be found because these parameters are estimated with respect to the backbone curves. Modeling parameters of existing numerical models can also vary with respect to loading protocol. The objective of this study is to propose a loading protocol-independent numerical model that does not require estimates of modeling parameters specifically tuned for a certain loading protocol. The accuracy of the proposed model is verified by comparing the simulated and measured cyclic curves of different sets of identical RC column specimens under various loading protocols.

대향류형 액체식 제습시스템의 제습 성능 예측을 위한 수치적 및 경험적 모델 비교

조혜진(Hye Jin Cho),박준영(Joon Young Park),천성용(Seong Yong Cheon),조민석(Min Seok Jo),정재원(Jae Weon Jeong) 대한설비공학회 2017 대한설비공학회 학술발표대회논문집 Vol.2017 No.6

This paper aims to propose the numerical model of counter flow type liquid desiccant (LD) system and to compare the dehumidification effectiveness between the numerical model and empirical model to verify the accuracy of the predicting performance of the proposed numerical model. A heat and mass transfer correlations using NTU as an input parameter are employed to solve this system model equations for predicting dehumidifications effectiveness. The simulation results were compared with the results from the empirical model presented in existing literatures. The 24 groups are chosen based on the air properties conditions for the liquid desiccant performance test and the valid parameter range of the empirical model. For the 24 groups of both predicted and experimental results, the overall discrepancy is within 20%, which proves that the calculated results by the model accord well with the experimental findings.

수치모형을 이용한 고리형 수위-유량 관계 분석

김지성(Kim Ji Sung),김원(Kim Won),김동구(Kim Dong Gu),김치영(Kim Chi Young) 대한토목학회 2009 대한토목학회논문집 B Vol.29 No.1B

본 연구에서는 일반적으로 유량 자료의 생산을 위해 널리 사용되는 수위-유량관계의 고리형 특성 분석과 수치모형에 의해 이를 재현하는 것을 목적으로 하고 있다. 팔당대교 등 3개 지점의 연속적인 수위와 유량자료를 분석한 결과 여러 사상에서 매우 강한 고리형 특성이 발생하는 것을 확인하였다. 이는 기존 단일 수위-유량관계가 많은 오차를 포함할 수 있다는 것을 나타낸다고 할 수 있다. 한강 본류부에 일차원 수치모형을 이용하여 다양한 홍수사상에 적용하고, 그 결과를 실측 수위와 비교하여 검증하였다. 특히 2007년 홍수사상의 경우, 한강대교에 설치된 ADVM을 이용한 연속적인 유량측정 자료와 비교하여 수치모형에 의한 간접유량 산정의 적용성을 검증하였다. 검증된 수치해석 결과로부터 주요지점의 수위-유량관계를 작성한 결과 실측치와 유사한 형태를 구할 수 있었는데, 적절히 보정되고 검증된 수치모형을 이용하면 고리형 특성이 매우 강한 수위-유량관계의 재현이 가능함을 분석하였다. 본 연구 결과는 기존 단일 수위-유량관계의 오차 분석과 수치모형을 이용한 고리형 수위-유량관계 개발에 기여할 수 있을 것으로 판단된다. This study is focused on the analysis of loop characteristics of stage-discharge relation which is widely used for the production of discharge data and the simulation of loop stage-discharge relation using the numerical model. Analysis of consecutive stage and discharge data at 3 points revealed that loop of stage-discharge relationship is very strong. This means that the existing single stage-discharge relation may include large amount of error. Various flood events are simulated in mainstream of Han river with one-dimensional numerical model. The calculated stage data are compared with measured data. Especially continuous field-flow measurements concurrently collected with an Acoustic Doppler Velocity Meter (ADVM) on Hangang bridge in the case of 2007 flood event are used to verify the model applicability of estimating flows in open channels. This comparison shows that numerical model is an accurate and reliable alternative for making the real stage-discharge relation. Simulation of stage-discharge relation by a numerical model at Paldang and Hangang bridge showed good agreements with measured one, so it may be possible to generate real loop stage-discharge relation with properly calibrated and verified numerical model. It can be concluded that results of this study can contribute to error analysis of conventional single stage-dis-charge relation and development of loop stage-discharge relation with numerical model.

Investigation of Flow Over Spillway Modeling and Comparison between Experimental Data and CFD Analysis

Serife Yurdagul Kumcu 대한토목학회 2017 KSCE JOURNAL OF CIVIL ENGINEERING Vol.21 No.3

As a part of design process for hydro-electric generating stations, hydraulic engineers typically conduct some form of model testing. The desired outcome from the testing can vary considerably depending on the specific situation, but often characteristics such as velocity patterns, discharge rating curves, water surface profiles, and pressures at various locations are measured. Due to recent advances in computational power and numerical techniques, it is now also possible to obtain much of this information through numerical modeling. In this paper, hydraulic characteristics of Kavsak Dam and Hydroelectric Power Plant (HEPP), which are under construction and built for producing energy in Turkey, were investigated experimentally by physical model studies. The 1/50-scaled physical model was used in conducting experiments. Flow depth, discharge and pressure data were recorded for different flow conditions. Serious modification was made on the original project with the experimental study. In order to evaluate the capability of the computational fluid dynamics on modeling spillway flow a comparative study was made by using results obtained from physical modeling and Computational Fluid Dynamics (CFD) simulation. A commercially available CFD program, which solves the Reynolds-averaged Navier-Stokes (RANS) equations, was used to model the numerical model setup by defining cells where the flow is partially or completely restricted in the computational space. Discharge rating curves, velocity patterns and pressures were used to compare the results of the physical model and the numerical model. It was shown that there is reasonably good agreement between the physical and numerical models in flow characteristics.

Eulerian-Granular method를 사용한 고체 입자 유동 모델 개발

이태규(T. G. Lee),신승원(S. W. Shin) 한국전산유체공학회 2015 한국전산유체공학회지 Vol.20 No.2

In this paper, we have developed numerical model for particulated flow through narrow slit using Eulerian-Granular method. Commercial software (FLUENT) was utilized as simulation tool and main focus was to identify the effect from various numerical options for modeling of solid particles as continuos phase in granular flow. Gidaspow model was chosen as basic model for solid viscosity and drag model. And lun-et-al model was used as solid pressure and radial distribution model, respectively. Several other model options in FLUENT were tested considering the cross related effect. Mass flow rate of the particulate through the slit was measured to compare. Due to the high volume density of the stacked particulates above the slit, effect from various numerical options were not significant. The numerical results from basic model were also compared with experimental results and showed very good agreement. The effects from the characteristics of particles such as diameter, angle of internal friction, and collision coefficient were also analyzed for future design of velocity resistance layer in solar thermal absorber. Angle of internal friction was found to be the dominat variable for the particle mass flow rate considerably. More defined 3D model along with energy equation for complete solar thermal absorber design is currently underway.

3차원 수치모형을 이용한 댐 붕괴파 모의에 관한 연구

정우창,이진우,조용식 한국방재학회 2012 한국방재학회논문집 Vol.12 No.2

In this study, the simulation of the flood wave due to the dam failure is carried out using a three-dimensional numerical model. The applied numerical model is ANSYS CFX (Ver. 13.0) which is a commercial software developed by ANSYS Inc. This numerical model is applied to three different cases of hydraulic model experiments related to the analysis of the dam-break wave, and the results simulated from three-dimensional model are compared and analyzed with those from laboratory measurements and the two-dimensional numerical model. As results of comparison, the predicted results agree well with measured ones and are more slightly accurate than those from the two-dimensional numerical model. In particular, the peak water depth and its time agree almost accurately with measured ones. Therefore, we can expect that the three-dimensional numerical model applied in this study could be effectively applied to predict the peak water depth and its time after a dam failure. 본 연구에서는 3차원 수치모형을 이용하여 댐 붕괴파에 대한 모의를 수행하였다. 적용된 3차원 수치모형은 ANSYS Inc에서 개발한 ANSYS CFX (Ver. 13.0) 상용 프로그램이며, 댐 붕괴파의 전파양상 분석과 관련된 기존의 세 가지 수리모형실험에 대해 측정결과와 2차원 수치모형에 의한 결과와 비교 및 분석을 수행하였다. 비교 결과 3차원 수치모형은 2차원 수치모형에 비해 측정결과에 보다 따르는 경향을 나타냈으며, 특히 첨두수심과 발생시간은 거의 정확하게 일치하였다. 따라서 본연구에서 적용된 3차원 수치모형은 댐 붕괴에 따른 첨두수심 및 발생시간의 예측에 대해 효과적으로 적용될 수 있을 것으로기대된다.