The conditional risk probability-based seawall height design method

Yang, Xing,Hu, Xiaodong,Li, Zhiqing The Society of Naval Architects of Korea 2015 International Journal of Naval Architecture and Oc Vol.7 No.6

The determination of the required seawall height is usually based on the combination of wind speed (or wave height) and still water level according to a specified return period, e.g., 50-year return period wind speed and 50-year return period still water level. In reality, the two variables are be partially correlated. This may be lead to over-design (costs) of seawall structures. The above-mentioned return period for the design of a seawall depends on economy, society and natural environment in the region. This means a specified risk level of overtopping or damage of a seawall structure is usually allowed. The aim of this paper is to present a conditional risk probability-based seawall height design method which incorporates the correlation of the two variables. For purposes of demonstration, the wind speeds and water levels collected from Jiangsu of China are analyzed. The results show this method can improve seawall height design accuracy.

The conditional risk probability-based seawall height design method

Xing Yang,Xiaodong Hu,Zhiqing Li 대한조선학회 2015 International Journal of Naval Architecture and Oc Vol.7 No.6

The determination of the required seawall height is usually based on the combination of wind speed (or wave height) and still water level according to a specified return period, e.g., 50-year return period wind speed and 50- year return period still water level. In reality, the two variables are be partially correlated. This may be lead to overdesign (costs) of seawall structures. The above-mentioned return period for the design of a seawall depends on economy, society and natural environment in the region. This means a specified risk level of overtopping or damage of a seawall structure is usually allowed. The aim of this paper is to present a conditional risk probability-based seawall height design method which incorporates the correlation of the two variables. For purposes of demonstration, the wind speeds and water levels collected from Jiangsu of China are analyzed. The results show this method can improve seawall height design accuracy.

Sliding Mode Predictive Active Fault-tolerant Control Method for Discrete Multi-faults System

Pu Yang,Zhangxi Liu,Dejie Li,Zhiqing Zhang,Zixin Wang 제어·로봇·시스템학회 2021 International Journal of Control, Automation, and Vol.19 No.3

For discrete systems with sensor and actuator failures, this paper proposes an observer that can estimate both sensor failures and actuator failures and designs a sliding mode predictive fault-tolerant control method based on an improved whale optimization algorithm. First, a proportional-integral observer that can observe actuator fault and sensor fault is designed to estimate the value of faults, which greatly improves the work efficiency. After that, a global sliding mode surface is designed as a prediction model, so that the initial state of the system is located on the sliding mode surface to avoid the instability of the sliding mode approaching the process. The reference trajectory of a power function with uncertainty and disturbance compensation is designed to reduce the bad influence of uncertainty and disturbance on the system and suppress chattering greatly. Meanwhile, in the rolling optimization part, an improved whale optimization algorithm(IWOA) is designed to optimize the control law. Finally, the simulation results on the four-rotor helicopter simulation platform show the practicability and superiority of the algorithm.

Anti-glioma Effect and Safety of Docetaxel-loaded Nanoemulsion

Huil Gaoe,Xinguo Jiang,Zhiqing Pang,Shuaiqi Pan,Shijie Cao,Zhi Yang,Chen Chen 대한약학회 2012 Archives of Pharmacal Research Vol.35 No.2

Docetaxel, an inhibitor of microtubule depolymerization, has been used for many malignancies. Due to its toxicity and the non-selective distribution of its commercial formulation, Taxotere®, new formulations with less toxicity and tumor targeting need to be explored. For its safety and ease of factory scale production, nanoemulsion, was selected to encapsulate docetaxel. The particle size of docetaxel loaded nanoemulsion (DNE) was 72.3 nm, the average zeta potential was −6.38 mV, the encapsulation efficiency was 93.1% and the drug loading capacity was 2.87%. Although DNE presented similar antiproliferation effects on both U87 cells and bEnd.3 cells, its in vivo toxicity was significantly lower than Taxotere®. In vivo fluorescent imaging suggested nanoemulsions loaded with a fluorescent probe could distribute to the brain and accumulate at the glioma site. The pharmacological experiments also confirmed that the DNE could target glioma sites and prolong the median survival time of mice with gliomas. In conclusion, DNE is a new, less toxic, drug formulation that is effective for brain glioma therapy.

The Predictive Value of Magnetic Resonance Imaging-based Texture Analysis in Evaluating Histopathological Grades of Breast Phyllodes Tumor

Yifei Mao,Zhongtang Xiong,Songxin Wu,Zhiqing Huang,Ruoxian Zhang,Yuqin He,Yuling Peng,Yang Ye,Tianfa Dong,Hui Mai 한국유방암학회 2022 Journal of breast cancer Vol.25 No.2

Purpose: Knowing the distinction between benign and borderline/malignant phyllodes tumors (PTs) can help in the surgical treatment course. Herein, we investigated the value of magnetic resonance imaging-based texture analysis (MRI-TA) in differentiating between benign and borderline/malignant PTs. Methods: Forty-three women with 44 histologically proven PTs underwent breast MRI before surgery and were classified into benign (n = 26) and borderline/malignant groups (n = 18 [15 borderline, 3 malignant]). Clinical and routine MRI parameters (CRMP) and MRI-TA were used to distinguish benign from borderline/malignant PT. In total, 298 texture parameters were extracted from fat-suppression (FS) T2-weighted, FS unenhanced T1-weighted, and FS first-enhanced T1-weighted sequences. To evaluate the diagnostic performance, receiver operating characteristic curve analysis was performed for the K-nearest neighbor classifier trained with significantly different parameters of CRMP, MRI sequence-based TA, and the combination strategy. Results: Compared with benign PTs, borderline/malignant ones presented a higher local recurrence (p = 0.045); larger size (p < 0.001); different time-intensity curve pattern (p = 0.010); and higher frequency of strong lobulation (p = 0.024), septation enhancement (p = 0.048), cystic component (p = 0.023), and irregular cystic wall (p = 0.045). TA of FS T2- weighted images (0.86) showed a significantly higher area under the curve (AUC) than that of FS unenhanced T1-weighted (0.65, p = 0.010) or first-enhanced phase (0.72, p = 0.049) images. The texture parameters of FS T2-weighted sequences tended to have a higher AUC than CRMP (0.79, p = 0.404). Additionally, the combination strategy exhibited a similar AUC (0.89, p = 0.622) in comparison with the texture parameters of FS T2-weighted sequences. Conclusion: MRI-TA demonstrated good predictive performance for breast PT pathological grading and could provide surgical planning guidance. Clinical data and routine MRI features were also valuable for grading PTs.

Cast Iron Smelting and Fining: An Iron Smelting Site of the Eastern Han Dynasty in Xuxiebian, Sichuan Province, China

( Yuniu Li ),( Chunyan Ma ),( Yasuyuki Murakami ),( Zhiqing Zhou ),( Yingdong Yang ),( Yingfu Li ) 성균관대학교 동아시아학술원 2019 Sungkyun Journal of East Asian Studies Vol.19 No.1

In this article, we introduce the excavation of an iron smelting site at Xuxiebian 許鞋匾, Pujiang 蒲江 County, Sichuan 四川 Province in the PRC. Two excavations were carried out in 2007 and 2011, and a total of four bowl-shaped furnaces, five pits, two trenches, and one posthole were excavated. The site is dated from the mid-late Eastern Han dynasty to the Jin dynasty (ca. AD 150-420) according to the local pottery assemblage. It is possible that the sole functions of the Xuxiebian site were the production of pig iron ingots and the conversion of pig iron to wrought iron. The iron ingots were likely transported to areas with stronger administrative control by the central government near the ancient city of Chengdu or even to the Central Plains, where they were then cast into different objects.

GATA2-Mediated Transcriptional Activation of Notch3 Promotes Pancreatic Cancer Liver Metastasis

Heng Lin,Peng Hu,Hongyu Zhang,Yong Deng,Zhiqing Yang,Leida Zhang 한국분자세포생물학회 2022 Molecules and cells Vol.45 No.5

The liver is the predominant metastatic site for pancreatic cancer. However, the factors that determine the liver metastasis and the specific molecular mechanisms are still unclear. In this study, we used human pancreatic cancer cell line Hs766T to establish Hs766T-L3, a subline of Hs766T with stable liver metastatic ability. We performed RNA sequencing of Hs766T-L3 and its parental cell line Hs766T, and revealed huge differences in gene expression patterns and pathway activation between these two cell lines. We correlated the difference in pathway activation with the expression of the four core transcriptional factors including STAT1, NR2F2, GATA2, and SMAD4. Using the TCGA database, we examined the relative expression of these transcription factors (TFs) in pan-cancer and their relationship with the prognosis of the pancreatic cancer. Among these TFs, we considered GATA2 is closely involved in tumor metastasis and may serve as a potential metastatic driver. Further in vitro and in vivo experiments confirmed that GATA2-mediated transcriptional activation of Notch3 promotes the liver metastasis of Hs766T-L3, and knockdown of either GATA2 or Notch3 reduces the metastatic ability of Hs766T-L3. Therefore, we claim that GATA2 may serve as a metastatic driver of pancreatic cancer and a potential therapeutic target to treat liver metastasis of pancreatic cancer.

The effect of biogas slurry application on biomass production and the silage quality of corn

Hua Sun,Kai Shi,Hairong Ding,Chenglong Ding,Zhiqing Yang,Chen An,Chongfu Jin,Beiyi Liu,Zhaoxin Zhong,Xia Xiao,Fuyin Hou Asian Australasian Association of Animal Productio 2023 Animal Bioscience Vol.36 No.12

Objective: The objective of this study was to evaluate the effect of biogas slurry application on biomass production and the silage quality of corn. Methods: A field experiment was conducted in which corn was grown using different biogas slurry application rates. The effect of 25% to 500% biogas slurry nitrogen replacement (T1 to T14) on the yield and quality indices of corn were studied by field plot experiments. Results: The results revealed that biogas slurry application improved the stem diameter and relative feed value of corn silage in treatments T13 and T11. Moreover, the fermentation quality of corn silage was improved due to an increase in lactic acid content; in comparison with the chemical synthetic fertilizer (CF) group. The crude protein contents of corn silage had no obvious change with increasing biogas slurry application. However, the forage quality index of acid detergent fiber was decreased (p<0.05) in the T11 group compared with the CF group. In addition, higher (p<0.05) 30 h in vitro dry matter digestibility and 30 h in vitro neutral detergent fiber digestibility were observed in the T11 and T13 groups than in the CF group. Conclusion: Based on these results, it was concluded that the optimum biogas slurry application rate for corn was approximately 350% to 450% biogas slurry nitrogen replacement under the present experimental conditions.