Static analysis of 2D-FG nonlocal porous tube using gradient strain theory and based on the first and higher-order beam theory

Xiaozhong Zhang,Jian-Feng Li,Yan Cui,Mostafa Habibi,H. Elhosiny Ali,Ibrahim AlBaijan,Tayebeh Mahmoudi 국제구조공학회 2023 Steel and Composite Structures, An International J Vol.49 No.3

This article focuses on the study of the buckling behavior of two-dimensional functionally graded (2D-FG) nanosize tubes, including porosity, based on the first shear deformation and higher-order theory of the tube. The nano-scale tube is simulated using the nonlocal gradient strain theory, and the general equations and boundary conditions are derived using Hamilton’s principle for the Zhang-Fu’s tube model (as a higher-order theory) and Timoshenko beam theory. Finally, the derived equations are solved using a numerical method for both simply-supported and clamped boundary conditions. A parametric study is performed to investigate the effects of different parameters, such as axial and radial FG power indices, porosity parameter, and nonlocal gradient strain parameters, on the buckling behavior of the bi-dimensional functionally graded porous tube. Keywords: Nonlocal strain gradient theory; buckling; Zhang-Fu’s tube model; Timoshenko theory; Two-dimensional functionally graded materials; Nanotubes; Higher-order theory.

Bone Grafting Can Promote the Prognosis of Displaced Femoral Neck Fractures: A Follow-up of the Clinical Significance of Bone Defects

Xiaozhong Zhu,Wei Wang,Zhiyuan Wang,Yi Zhu,Guangyi Li,Jiong Mei 대한정형외과학회 2023 Clinics in Orthopedic Surgery Vol.15 No.4

Background: Femoral neck fractures (FNFs) comprise a large proportion of osteoporotic fractures in Asia. However, the full range of prognostic variables that affect prognosis remains unclear. Here, we aimed to determine whether the severity of bone defects at the fracture site and other variables impact the prognosis of displaced FNFs. Methods: We evaluated the incidence of FNF internal fixation failures at regular intervals after surgery in data collected retrospectively. Digital Imaging and Communications in Medicine (DICOM) magnetic resonance imaging data of the displaced FNFs of 204 patients (> 20 years old; mean age, 52.3 years; men, 55.4%) who underwent internal fixation were used to construct threedimensional (3D) virtual models of the femoral neck region. We calculated the position and volume of bone defect (VBD) using our independently developed algorithm and Mimics software. Each participant was followed up for at least 24 months; complications were noted and correlated with VBD and demographic and clinical variables. Results: On the basis of VBD values calculated from virtual reduction models, 57 patients were categorized as having a mild defect, 100 as having a moderate defect, and 47 as having a severe defect. Age (p = 0.046) and VBD (p < 0.001) were significantly correlated with internal fixation failure. Multivariate analysis revealed that severe bone defects were associated with internal fixation failure (adjusted odds ratio [aOR], 23.073; 95% confidence interval [CI], 2.791–190.732) and complications (aOR, 8.945; 95% CI, 1.829–43.749). In patients with a severe defect, bone grafting was inversely associated with internal fixation failure (aOR, 0.022; 95% CI, 0.002–0.268) and complications (aOR, 0.023; 95% CI, 0.002–0.299). Conclusions: Bone defect severity was associated with internal fixation failure and other complications. For young adults with large VBDs, bone grafting of the defect can reduce the risk of internal fixation failure. These results provide useful new quantitative information for precisely classifying displaced FNFs and guiding subsequent optimal treatments.

Controlling the Thickness of Thermally Expanded Films of Graphene Oxide

Chen, Xianjue,Li, Wei,Luo, Da,Huang, Ming,Wu, Xiaozhong,Huang, Yuan,Lee, Sun Hwa,Chen, Xiong,Ruoff, Rodney S. American Chemical Society 2017 ACS NANO Vol.11 No.1

<P>'Paper-like' film material made from stacked and overlapping graphene oxide sheets can be exfoliated (expanded) through rapid heating, and this has until now been done with no control of the final geometry of the expanded graphene oxide material, i.e., the expansion has been physically unconstrained. (As a consequence of the heating and exfoliation, the graphene oxide is 'reduced', i.e., the graphene oxide platelets are deoxygenated to a degree.) We have used a confined space to constrain the expanding films to a controllable and uniform thickness. By changing the gap above the film, the final thickness of expanded films prepared from, e.g., a 10 mu m-thick graphene oxide film, could be controlled to values such as 20, 30, 50, or 100 mu m. When the expansion of the films was unconstrained, the final film was broken into pieces or had many cracks. In contrast, when the expansion was constrained, it never cracked or broke. Hot pressing the expanded reduced graphene oxide films at 1000 degrees C yielded a highly compact structure and promoted graphitization. Such thickness-controlled expansion of graphene oxide films up to tens or hundreds of times the original film thickness was used to emboss patterns on the films to produce areas with different thicknesses that remain connected 'in plane'. In another set of experiments, we treated the original graphene oxide film with NaOH before its controlled expansion resulted in a different structure featuring uniformly distributed pores and interconnected layers as well as simultaneous activation of the carbon.</P>

n-Acetylcysteine protects against diazinon-induced histopathological damage and apoptosis in renal tissue of rats

Dong Gaiqin,Li Qingfeng,Yu Chun,Wang Qing,Zuo Danhua,Li Xiaozhong 한국독성학회 2024 Toxicological Research Vol.40 No.2

Diazinon (DZN) is a member of organophosphorus insecticides that has cytotoxic effects on different organs. n-Acetyl cysteine (NAC) is a widely used antioxidant in clinical, in vivo and in vitro studies. We evaluated the protective role of NAC against DZN-induced toxicity in kidney tissue of Wistar rats. 30 male Wistar rats were divided into 5 groups of control, single dose of DZN, continuous dose of DZN, single doses of DZN + NAC and continuous doses of DZN + NAC. Kidney function test (blood urea nitrogen, creatinine and uric acid) was provided. Levels of malondialdehyde (MDA), total antioxidant capacity (TAC) and total sulfhydryl (T-SH) were determined in renal tissues. Renal cells apoptosis was detected using TUNEL assay. The mRNA expressions of apoptosis, oxidative stress and inflammatory mediators, including B-cell lymphoma-2 (Bcl2), Bcl-2-associated X protein (Bax), superoxide dismutase (SOD), catalase (CAT), Interleukin 10 (IL-10), Tumor necrosis factor-α (TNF-α), Caspase-3 and Caspase-8 were analyzed in kidney tissues using Real Time PCR method. Chronic exposure to DZN was associated with severe morphological changes in the kidney, as well as impairment of its function and decreased kidney weights. Continues treatment with DZN significantly decreased the percentage of renal apoptotic cells as compared to rats treated with continuous dose of DZN alone (17.69 ± 3.67% vs. 39.46% ± 2.44%; p < 0.001). Continuous exposure to DZN significantly decreased TAC and T-SH contents, as well as SOD and CAT expression, but increased MDA contents in the kidney tissues (p < 0.001). A significant increase was observed in mRNA expression of Bax, Caspase-3, Caspase-8, as well as TNF-α following exposure to DZN, but the expression of IL-10 and Bcl2 was significantly decreased. NAC can protect kidney tissue against DZN-induced toxicity by elevating antioxidants capacity, mitigating oxidative stress, inflammation and apoptosis.

Reliability Analysis of Unrepairable Systems with Uncertain Lifetimes

Ying Liu,Xiaozhong Li,Congcong Xiong 보안공학연구지원센터 2015 International Journal of Security and Its Applicat Vol.9 No.12

The topic of unrepairable system is an important content in system reliability theory. There are many reasons cannot be repaired, some because of technical reasons, cannot repair, some because of economic reasons, not worth to repair, and some because of making repairable system simplification. So it is essential to pay attention to unrepairable systems. In this paper, the lifetimes of unrepairable systems are considered as uncertain variables. Based on that, the fundamental mathematical models of series systems, parallel systems, series-parallel systems and parallel-series systems are established, respectively. Furthermore, we make reliability analysis of above four unrepairable systems, respectively. Some numerical examples are also given for illustration.

ShcD interacts with TrkB via its PTB and SH2 domains and regulates BDNF-induced MAPK activation

( Yuangang You ),( Weiqi Li ),( Yanhua Gong ),( Bin Yin ),( Boqin Qiang ),( Jiangang Yuan ),( Xiaozhong Peng ) 생화학분자생물학회 (구 한국생화학분자생물학회) 2010 BMB Reports Vol.43 No.7

Neurotrophins regulate many aspects of neuronal function through activation of the high affinity Trk receptors. Shc family proteins are implicated in the coupling of RTK to the Ras/mitogen- activated protein kinase signaling cascade. Here we report that the fourth Shc family member, ShcD, associates with TrkB receptor and regulates BDNF-induced MAPK activation. Yeast two-hybrid assay and Co-IP experiments demonstrate ShcD interacts with TrkB in a kinase-activity-dependent manner. Confocal analysis shows ShcD cololizes well with TrkB in transfected 293T cells. Subsequent mapping experiments and mutational analysis indicate that both PTB and SH2 domains are capable of binding to TrkB and PTB domain binds to TrkB NPQY motif. Furthermore, ShcD is involved in BDNF-induced MAPK activation. In summary, we demonstrate that ShcD is a substrate of TrkB and mediates TrkB downstream signaling pathway. [BMB reports 2010; 43(7): 485-490]

Compensation of springback error based on comprehensive displacement method in cold rotary forging for hypoid gear

Yugong Dang,Yongyu Yao,Xiaozhong Deng,Genggeng Li,Chuang Jiang 대한기계학회 2019 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.33 No.7

Special cold rotary forging method for the fabrication of the big wheels of hypoid gears is proposed. The proposed method is established on the basis of the requirements of antifatigue manufacturing processes and the tooth profile characteristics of hypoid gears combined with the movement and forming methods of cold rotary forging. The geometric grid model is constructed on the basis of the basic theory of elastic-plastic thermo-mechanical coupling finite element for metal. Reasonable process parameters and boundary conditions are established. Thus, the cold rotary forging finite element model is built. The springback tooth surface is reconstructed through the results of finite element numerical simulation. The size and distribution of the springback error is the detected. In the springback process, a large displacement and large rotation can occur, so a comprehensive displacement compensation algorithm is adopted to modify the rotary forging die, and a springback error compensation iteration system is constructed based on the modified algorithm. In the case of a camion driving axle gear, the correction of the rotary forging die is analyzed. Results show that the error is already within the allowed range through only three iterations, which proves the efficiency of the system. The modified die is used for machining experiments. The measurement results of the experiment gear are consistent with the simulation results, which proves the reliability of the system. The LTCA of the gear further proves its reliability in compensating for springback error using numerical simulation technique.

Graphitization of graphene oxide films under pressure

Chen, Xianjue,Deng, Xiaomei,Kim, Na Yeon,Wang, Yu,Huang, Yuan,Peng, Li,Huang, Ming,Zhang, Xu,Chen, Xiong,Luo, Da,Wang, Bin,Wu, Xiaozhong,Ma, Yufei,Lee, Zonghoon,Ruoff, Rodney S. Elsevier 2018 Carbon Vol.132 No.-

<P><B>Abstract</B></P> <P>Lightweight, flexible graphite foils that are chemically inert, high-temperature resistant, and highly electrically and thermally conductive can be used as component materials in numerous applications. “Graphenic” foils can be prepared by thermally transforming graphene oxide films. For this transformation, it is desirable to maintain a densely packed film structure at high heating rates as well as to lower the graphitizing temperatures. In this work, we discuss the pressure-assisted thermal decomposition of graphene oxide films by hot pressing at different temperatures (<I>i.e.</I>, 300 °C, 1000 °C, or 2000 °C). The films pressed at 1000 °C or 2000 °C were subsequently heated at 2750 °C to achieve a higher degree of graphitization. The combination of heating and pressing promotes the simultaneous thermal decomposition and graphitic transformation of G-O films. Films pressed at 2000 °C as well as films further graphitized at 2750 °C show high chemical purity, uniformity, and retain their flexibility. For films pressed at 2000 °C and then further heated at 2750 °C, the mechanical performances outperform the reported values of the “graphite” foils prepared by calendering exfoliated graphite flakes; the electrical conductivity is ∼3.1 × 10<SUP>5</SUP> S/m and the in-plane thermal conductivity is ∼1.2 × 10<SUP>3</SUP> W/(m·K).</P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>