Convolutive Independent Component Analysis Based on First-order Statistics for Complex-valued Source Extraction

Peng-cheng Xu,Yue-hong Shen 보안공학연구지원센터 2016 International Journal of Signal Processing, Image Vol.9 No.1

This paper addresses the problem of independent component extraction of complex-valued signals in convolutive mixtures. Most previous research focused on real-valued convolutive ICA, and corresponding solution methods are generally computationally complex and inefficient for real application. In order to solve the problem, we propose a novel method based on first-order statistics, which includes several single-step and iterative separators to satisfy different demands of engineering applications. We also provided the theoretical performance analysis, which is validated by experimental simulations. It is observed from the simulations that various factors (especially the noncircularity) affect the extraction performance of separators; hence we offer some advice on how to choose separators properly. Besides, the proposed iterative separators generally perform better and converge faster compared to two complex FastICA algorithms.

Impact of Co-transfection with Livin and Survivin shRNA Expression Vectors on Biological Behavior of HepG2 Cells

Xu, Wei,Chang, Hong,Qin, Cheng-Kun,Zhai, Yun-Peng Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.9

Objective: To construct short hairpin RNA (shRNA) eukaryotic expression vectors targeting Livin and Survivin genes, and to explore the impact of co-transfection of Livin and Survivin shRNA expression vectors on the biological behavior of HepG2 cells. Methods: shRNA eukaryotic expression vectors pSD11-Livin and pSD11-Survivin were designed and constructed then transfected into HepG2 cells separately or in combination. mRNA and protein expression in transfected cells was assessed by quantitative fluorescence PCR and Western blotting, respectively. Cell proliferation was measured by MTT assay and cell apoptosis by TUNEL assay. Results: The Livin and Survivin shRNA eukaryotic expression vectors were successfully constructed and transfected into HepG2 cells. The relative mRNA expression levels of Livin and Survivin in HepG2 cells co-transfected with pSD11-Livin and pSD11-Survivin were $0.12{\pm}0.02$ and $0.33{\pm}0.13$, respectively, which was significantly lower than levels in cells transfected with either pSD11-Livin or pSD11-Survivin (P<0.05). The relative protein expression levels of Livin and Survivin in the co-transfected cells were also significantly decreased compared to single-transfection (P<0.05). The inhibition rate of cell growth in the co-transfection group was higher than that in the single-transfection groups at 48 h, 60 h, or 72 h after transfection (P<0.01). The apoptotic rate increased to the greatest extent in the co-transfection group relative to any other group (P<0.05). Conclusions: Co-transfection with pSD11-Livin and pSD11-Survivin was more efficient than transfection with either vector alone in reducing the mRNA and protein expression of Livin and Survivin genes in HepG2 cells. Co-transfection also inhibited the proliferation of transfected cells more than the other groups, and induced cellular apoptosis more effectively.

Synthesis and characterization of monodisperse yttrium aluminum garnet (YAG) micro-crystals with rhombic dodecahedron

Xu, Tao,Yuan, Rui,Xu, Peng-Cheng,Pan, Dong-Jie,Yang, Woochul,Guo, Hai-Bo,Shen, Yu-Fang,Hu, Jian-Feng,Zhang, Zhi-Jun,Zhao, Jing-Tai Elsevier 2018 Journal of alloys and compounds Vol.762 No.-

<P><B>Abstract</B></P> <P>Uniform, monodisperse yttrium aluminum garnet (YAG) rhombic dodecahedron micro-crystals were synthesized using coprecipitation and hydrothermal methods. The Na<SUB>2</SUB>SO<SUB>4</SUB> as a surfactant was helpful in improving the dispersity of the crystallites and forming well-faceted, micro-sized dodecahedral YAG crystallites. The effect of the reaction time and the solvent has also been studied. The crystal growth mechanism called dissolution/crystallization was determined by analyzing the experimental and simulated results. And the specific well-developed crystal facets in the {110} family have been demonstrated by the theoretical calculation. A higher integrated emission intensity can be achieved for the YAG:Ce crystallites by improving the phase purity, morphology with better developed dodecahedrons, and dispersion. Furthermore, a rather high luminous efficacy (LE = 104.14 lm/W) for the white LED fabricated using the YAG:Ce<SUP>3+</SUP> phosphor prepared in this work was realized. The correlation between the crystal growth, morphology and luminescence properties of YAG crystallites has been established, which exhibits a great importance for the synthesis and application of mono-dispersed YAG crystallites.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Uniform and monodisperse YAG rhombic dodecahedron micro-crystals were synthesized. </LI> <LI> The growth mechanism of YAG rhombic dodecahedron was studied through experimental and computational simulation. </LI> <LI> The correlation between the crystal growth, morphology and luminescence of YAG crystallites was established. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Antimicrobial Resistance and Molecular Characteristics of Nasal Staphylococcus aureus Isolates From Newly Admitted Inpatients

XU CHENG,Kangde Sun,Danfeng Dong,Qingqiong Luo, M.S,Yibing Peng,Fuxiang Chen 대한진단검사의학회 2016 Annals of Laboratory Medicine Vol.36 No.3

Staphylococcus aureus, or methicillin-resistant S. aureus (MRSA), is a significant pathogen in both nosocomial and community infections. Community-associated MRSA (CA-MRSA) strains tend to be multi-drug resistant and to invade hospital settings. This study aimed to assess the antimicrobial resistance and molecular characteristicsof nasal S. aureus among newlyadmitted inpatients.In the present study, 66 S. aureus isolates, including 10 healthcare-associated MRSA (HA-MRSA), 8 CA-MRSA, and 48 methicillin-sensitive S. aureus (MSSA) strains, were found in the nasal cavities of 62 patients by screening 292 newlyadmitted patients. Antimicrobial resistance and molecular characteristics of these isolates, including spa-type, sequence type (ST) and SCCmec type, were investigated. All isolates were sensitive to linezolid, teicoplanin, and quinupristin/dalfopristin, but high levels of resistance to penicillin and erythromycin were detected. According to D-test and erm gene detection results, the cMLSB and iMLSB phenotypes were detected in 24 and 16 isolates, respectively. All 10 HA-MRSA strains displayed the cMLSB phenotypemediated by ermA or ermA/ermC, while the cMLSB CA-MRSA and MSSA strains carried the ermB gene. Molecular characterization revealedall 10 HA-MRSA strains were derived from the ST239-SCCmec III clone, and four out of eight CA-MRSA strains were t437-ST59-SCCmec V. The results suggest that patients play an indispensable role in transmitting epidemic CA-MRSA and HA-MRSA strains.

Lightweight and Ultrastrong Polymer Foams with Unusually Superior Flame Retardancy

Xu, Linli,Xiao, Linhong,Jia, Pan,Goossens, Karel,Liu, Peng,Li, Hui,Cheng, Chungui,Huang, Yong,Bielawski, Christopher W.,Geng, Jianxin American Chemical Society 2017 ACS APPLIED MATERIALS & INTERFACES Vol.9 No.31

<P>High-performance flame-retardant materials are urgently needed to address outstanding issues that pertain to safety. Traditional flame retardants are toxic to the environment and/or lack the physical properties required for use in many contemporary applications. Here, we show that isocyanate-based polyimide (PI) foam, a flammable material, can exhibit unusually superior flame retardancy as well as, other excellent properties, such as being lightweight and displaying high mechanical strength, by incorporating red phosphorus (RP)-hybridized graphene. The covalent bonds formed between the graphene platelets and the PI matrix provide the resultant PI foam with a specific Young's modulus (83 kNm kg(-1)) that is comparable to or even higher than those displayed by state-of-the-art foams, including silica aerogels, polystyrene foams, and polyurethane foams. In addition, even a low content of the RP -hybridized graphene (2.2 wt %) results in an exceptionally higher limiting oxygen index (39.4) than those of traditional flame-retardant polymer-based materials (typically 20-30). The resultant PI foam also exhibits thermal insulation properties that are similar to that of air. Moreover, the RP -hybridized graphene is prepared using a one-step ball milling process in 100% yield, and does not require solvent or produce waste. The preparation of the flame-retardant PI foams can be scaled as the starting materials are commercially available and the techniques employed are industrially compatible.</P>

A 5.6 kW 11.7 kW per kg Four-Phase Interleaved Buck Converter for the Unmanned Aerial Vehicle

Cheng Xu-Feng,Peng Zhenzhen,Yang Yulong,Liang Zhimin,Wu Chaofeng,Shao Zhiwei,Wang Dianlong 대한전기학회 2022 Journal of Electrical Engineering & Technology Vol.17 No.2

This paper proposed a 5.6 kW 11.7 kW/kg four-phase interleaved buck converter (FPIBC) for the unmanned aerial vehicle (UAV) low-voltage power system. The UAV mainly concerns the lightweight strategy and the power density of the DC-DC converter. We proposed a comprehensive lightweight strategy with the characteristics of reduced inductor current ripples, small size of fi lter inductors and capacitors, and high output power. The output current ripples are reduced by using interleaved modulation strategy and integrated CLC fi lters cascaded to the input side and output side respectively. In addition, the aluminum based printed circuit board (PCB) is used with SMD power transistors to obtain better heat dissipation capability without fans. With abovementioned methods, the designed DC-DC converter has a power of 5.6 kW @ 0.48 kg, the powerto-weight ratio is improved to be 11.7 kW/kg, and the power density is 3 W/cm 3 . The effi ciency of this DC-DC converter is up to 95.8%.

Expression and Significance of Microsomal Prostaglandin Synthase-1 (mPGES-1) and Beclin-1 in the Development of Prostate Cancer

Xu, Lu-Wei,Qian, Ming,Jia, Rui-Peng,Xu, Zheng,Wu, Jian-Ping,Li, Wen-Cheng,Huang, Wen-Bin,Chen, Xing-Guo Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.4

The aim of this study was to investigate the expression and significance of microsomal prostaglandin synthase-1 (mPGES-1) and Beclin-1 in the development of prostate cancer (PCa). Immunohistochemistry was performed on paraffin-embedded sections with rabbit polyclonal against mPGES-1 and Beclin-1 in 40 PCa, 40 benign prostatic hyperplasia (BPH) and 10 normal prostate specimens for this purpose. Quantitative real-time polymerase chain reaction (qRT-PCR) was applied for mRNA expression of mPGES-1 and Beclin-1, while MTT assays were used to ascertain the best working concentration of the mPGES-1 inhibitor (CAY10526). The effect of CAY10526 treatment on expression of Beclin-1 in DU-145 cells was studied using Western blot analysis. Localization of Beclin-1 and mPGES-1 was in endochylema. Significant differences in expression was noted among PCa, BPH and normal issues (P<0.05). Beclin-1 expression inversely correlated with mPGES-1 expression in PCa tissue (P<0.05). CAY10526 could significantly block mPGES-1 expression and the proliferation of DU-145 cells (P<0.05), while increasing Beclin-1 levels (P<0.05). Overexpression of mPGES-1 could decrease the autophagic PCa cell death. Inhibiting the expression of mPGES-1 may lead to DU-145 cell death and up-regulation of Beclin-1. The results suggest that inhibition of mPGES-1 may have therapeutic potential for PCa in the future.

Past Millennium Contrasting Hydroclimate Patterns Between Monsoonal Northern China and Arid Central Asia: a Modeling Study

Youbing Peng,Hai Cheng,Caiming Shen,Ying Xu,Naifang Bei 한국기상학회 2018 Asia-Pacific Journal of Atmospheric Sciences Vol.54 No.3

Widely distributed proxy records show that there were out-of-phase behaviors of moisture change between arid central Asia (ACA) and monsoonal northern China during the Little Ice Age (LIA) and Medieval Climate Anomaly (MCA). We examined spatial pattern differences between the MCA and LIA to identify contrasting patterns of summer precipitation variability, and to diagnose explanatory mechanisms through the analysis of a 1000-year global climate model simulation driven by natural and anthropogenic forcing. The results show that the model was able to roughly produce the general features of MCA-LIA hydroclimatic spatial differences between monsoonal northern China and ACA, with a relatively wet MCA found in monsoonal northern China and a relatively dry MCA found in ACA. A further analysis of associated circulations shows that increased summer precipitation in monsoonal northern China was caused by the strengthening of summer monsoon, while the decline in summer precipitation in ACAwas caused by an anomalous northward displacement of the subtropical westerly jet stream. Our analyses suggest that both effective solar forcing and El-Niño Southern Oscillation (ENSO) may produce these contrasting patterns of precipitation between monsoonal northern China and ACA. Due to a change in the probability of ENSO phases at the centennial time scale found in our experiments may be attributed to solar irradiances, higher effective solar irradiances during the MCA relative to those of the LIA may have been the ultimate forcing mechanism for the simulated precipitation differences between the MCA and LIA.

Aberrant methylation of the 16q23.1 tumor suppressor gene ADAMTS18 promotes tumorigenesis and progression of clear cell renal cell carcinoma

Ben Xu,Yi‑ji Peng,Bing‑lei Ma,Si‑da Cheng 한국유전학회 2021 Genes & Genomics Vol.43 No.2

Background The 16q23.1 tumor suppressor gene (TSG) of ADAMTS18 has been identifed to be aberrant methylated in clear cell renal cell carcinoma (ccRCC), and there still exists an unclear situation between its methylation and the progression of ccRCC. Objective To analyze the biological function and mechanism of ADAMTS18 gene in the tumorigenesis and progression of ccRCC. Methods We examined ADAMTS18 gene methylation using methylation- specifc polymerase chain reaction (MSP) in 92 ccRCC primary tumors from September 2017 to May 2018. Using reverse transcriptase PCR (RT-PCR) and immunohistochemical (IHC) assay, the relative expression level of ADAMTS18 was measured in the representative tumor samples with their adjacent normal tissues. Meanwhile, colony formation, cell viability, wound healing, transwell chamber, fow cytometry, and PI staining were performed to confrm the tumor-suppressive function and mechanism of ADAMTS18 gene. Results Aberrant methylation was further detected in 47 of the 92 (51.1%) primary tumors and in 8 of the 92 (8.7%) adjacent normal tissues (p<0.05). Due to the phenomenon of aberrant methylation, ectopic low-level expression of ADAMTS18 gene could result in the promotion of tumorigenesis and progression in ccRCC. Conclusion The aberrantly methylated ADAMTS18 gene may be involved in the tumorigenesis and progression of ccRCC.

Numerical analysis on tensile properties of composite hybrid bonded/bolted joints with flanging

Xiaoquan Cheng,Jie Zhang,Jikui Zhang,Peng Liu,Yujia Cheng,Yahong Xu 국제구조공학회 2018 Steel and Composite Structures, An International J Vol.26 No.3

A detailed study was carried out on the tensile properties of the single-lap joint of a steel panel bolted/bonded to a composite laminate with a flanging. Finite element model (FEM) was established to predict the strength and to analyze the damage propagation of the hybrid joints by ABAQUS/Standard, which especially adopted cohesive elements to simulate the interface between the laminate and adhesive. The strength and failure mode predicted by FEM were in good agreement with the experimental results. In addition, three influence factors including adhesive thickness, bolt preload and bolt-hole clearance were studied. The results show that the three parameters have effect on the first drop load of the load-displacement curve, but the effect of bolt-hole clearance is the largest. The bolt-hole clearance should be avoided for hybrid joints.