다원기술 상호보완식 태양열 난방기술

남보현(Nan Bao-xuan) 한국태양에너지학회 2008 한국태양에너지학회 논문집 Vol.28 No.6

This article deals with system technology of a new solar heating system which systematically com bines existing solar collector technology, auxiliary electrical water heating, floor heating system and well insulated construction method and its application of this system to apartment house heating system in the cold region, and also analyzed performance of the new system in terms of technical and economic feasibility. Results shows that energy efficiency approaches up to 50% of the energy consumption of local construction from 1980 to 1981. The implementation of "DQ technology" to floor heating system achieved from 79% to 85% of the energy-saving benefits comparing to other housing units which were supplied by the local district heating plant.

Molecular organization of the B mating type locus of a Lentinula edodes monokaryon strain SUP2

Bao Da-Peng Chen Ming-Jie,Song Wen-Hua,Song Chun-yan,Zhang Mei-Yan,Chen Xiang,Lin Nan 한국버섯학회 2010 한국버섯학회 국제학술대회 Vol.6 No.-

Effect of Heterogeneous Lamella Structure on Mechanical Properties of Double-Pass Friction Stir Processed Cu–30%Zn Alloy

Nan Xu,Yuzhui Xu,Boshuo Zhang,Qining Song,Jianhua Zhao,Yefeng Bao 대한금속·재료학회 2023 METALS AND MATERIALS International Vol.29 No.11

Double-pass friction-stir processing (FSP) with different probe lengths and coolants was conducted on a 3 mm thick Cu–30%Zn alloy plate, and a heterogeneous lamella structure (HLS) was produced along the plate thickness direction. TheHLS can be divided into three layers with their volume ratio was approximately 1:1:1, i.e., ultra-fine grain layer, fine grainlayer, and coarsened grain layer which produced by cold source assisted FSP, conventional FSP, and annealing treatment,respectively. The average hardness in ultra-fine grain layer was about 123 HV, which was significantly higher than those ofcoarsened grain layer (94 HV) and fine grain layer (105 HV). In each layer, the hardness slightly decreased with distanceincreased from the surface, but the hardness value decreased sharply in the transition zones of different layers. The HLSCu–30%Zn alloy showed yield strength of 220 MPa, ultimate tensile strength of 462 MPa, and fracture elongation of 30%. The strength-ductility synergy was attributed to the back-stress strengthening between the different layers, which induceda remarkable strain hardening at the initial stage of plastic deformation. This study provided a possible way for preparingHLS copper alloys with relatively good mechanical properties, and the HLS copper alloys have an application potential inthe manufacture of bearing, propeller, and condenser.

In Vitro Inhibitory Effect of Triterpenoidal Saponins from Platycodi Radix on Pancreatic Lipase

Bao Jun Xu,Li Kun Han,Yi Nan Zheng,Jeong Hyun Lee,Chang Keun Sung 대한약학회 2005 Archives of Pharmacal Research Vol.28 No.2

In the process of investigating anti-obesity effect of Platycodi Radix, we found that aqueous extract of Platycodi Radix might inhibit intestinal absorption of dietary fat by inhibiting pancreatic lipase (PL) activity. In order to clarify the anti-obesity mechanism of Platycodi Radix, activity- guided isolation was performed to find active components. The total saponin fraction of Platycodi Radix appeared to have a potent inhibitory activity against the hydrolysis of triolein emulsified with phosphatidycholine by pancreatic lipase in vitro. Based on these results, further purification of active components yielded 10 known triterpenoidal saponins, among these compounds, platycodin A, C, D, and deapioplatycodin D exhibited significant inhibitory effects on PL at the concentration of 500 µg/mL with 3.3, 5.2, 34.8, and 11.67% pancreatic lipase activity vs control, respectively. Platycodin D was found to inhibit the PL activity in a dosedependent manner. Therefore, the anti-obesity effect of Platycodi Radix might be due to the inhibition of pancreatic lipase by its saponins.

DISPERSION OF CARBON NANOFIBERS IN AQUEOUS SOLUTION

BAO-MIN WANG,YUAN ZHANG,ZHI-QIANG GUO,YU HAN,HAI-NAN MA 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2012 NANO Vol.7 No.6

Carbon nano¯bers (CNFs) were puri¯ed by the method of heat treating, and stable homogeneous suspensions of heat-treated CNFs were prepared by using methylcellulose (MC) as a surfactant. The heat-treated CNFs were characterized by di®erential thermal analysis (DTA) and thermogravimetry analysis (TGA), and the sonication-driven dispersion of CNFs in aqueous solution was investigated by measuring ultraviolet absorbency (UV absorbency), zeta potential, adsorption isotherm of MC on CNFs and surface tension of CNF suspensions. In these CNF suspensions, the zeta potentials of CNFs progressively increase with increasing MC concentration, and change from ?15.4?0 mV. The surface tension of CNF suspensions decrease from 38.87mN/m to 36.54mN/m. The adsorption isotherm of MC on CNFs shows an adsorption platform (namely \L" style), and the adsorption isotherm reaches the saturation plateau at MC concentration of about 0.4 g/L. All results show that the optimum concentration ratio of MC to CNFs is 2:1 for dispersion.

Molecular organization of the B mating type locus of a Lentinula edodes monokaryon strain SUP2

Bao Da-Peng Chen Ming-Jie,Song Wen-Hua,Song Chun-yan,Zhang Mei-Yan,Chen Xiang,Lin Nan 한국버섯학회 2010 한국버섯학회지 Vol.8 No.4

Lentinula edodes is an important cultivated mushroom in China. The development of Lentinula edodes production promotes more studies on it. In our previous work, degenerate PCR and chromosome walking technologies were used to obtain one pheromone receptor gene and one pheromone precursor gene from Lentinula edodes. In this study, four pairs of specific primers were designed according to the whole genome sequencing of the protoplast monokaryon of Lentinula edodes strain 135, to amplify STE3-like pheromone receptor gene and its flanking conserved genes in the protoplast monokaryon strain SUP2 derived from Lentinula edodes strain Suxiang and 33655bp DNA sequence was obtained. By BlastX search, seven putative genes were identified, and three of them are pheromone receptor encoded genes. Furthermore, near to two pheromone receptor genes, four genes encoding proteins with conserved motifs of pheromone precursors were found. This study firstly reveals the molecular organization of the B mating type locus of Lentinula edodes.

Screening of MicroRNA in Patients with Esophageal Cancer at Same Tumor Node Metastasis Stage with Different Prognoses

Zhao, Bao-Sheng,Liu, Shang-Guo,Wang, Tian-Yun,Ji, Ying-Hua,Qi, Bo,Tao, Yi-Peng,Li, Han-Chen,Wu, Xiang-Nan Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.1

Patients at the same pathological stage of esophageal cancer (EC) that received the same surgical therapy by the same surgeon may have distinct prognoses. The current study aimed to explore the possibility of differentially-expressed microRNAs (miRNAs) underlying this phenomenon. Samples were collected from EC patients at the same tumor node metastasis (TNM) stage but with different prognoses. Paracancerous normal tissues were taken as controls. The specimens were histopathologically analyzed. Differentially-expressed miRNAs were analyzed using real-time quantitative reverse transcription polymerase chain reaction. Compared with patients with poor prognosis, those with good prognosis exhibited 88 two-fold or more than two-fold increased miRNA fragments and 4 half-decreased miRNAs. The most noticeably up-regulated miRNAs included hsa-miR-31, hsa-miR-196b, hsa-miR-652, hsa-miR-125a-5p, hsa-miR-146b, hsa-miR-200c, hsa-miR-23b, hsa-miR-29a, hsa-miR-186, hsa-miR-205, hsa-miR-376a, hsa-miR-410, hsa-miR-532-3p, and hsa-miR-598, whereas the most significantly-downregulated miRNAs were hsa-let-7e, hsa-miR-130b, and hsa-miR-103. EC patients at same TNM stage but with different prognoses show differentially-expressed miRNAs.

In Vitro Inhibitory Effect of Triterpenoidal Saponins from Platycodi Radix on Pancreatic Lipase

Xu Bao Jun,Han Li Kun,Zheng Yi Nan,Lee Jeong Hyun,Sung Chang Keun The Pharmaceutical Society of Korea 2005 Archives of Pharmacal Research Vol.28 No.2

In the process of investigating anti-obesity effect of Platycodi Radix, we found that aqueous extract of Platycodi Radix might inhibit intestinal absorption of dietary fat by inhibiting pancreatic lipase (PL) activity. In order to clarify the anti-obesity mechanism of Platycodi Radix, activity-guided isolation was performed to find active components. The total saponin fraction of Platycodi Radix appeared to have a potent inhibitory activity against the hydrolysis of triolein emulsified with phosphatidycholine by pancreatic lipase in vitro. Based on these results, further purification of active components yielded 10 known triterpenoidal saponins, among these compounds, platycodin A, C, D, and deapioplatycodin D exhibited significant inhibitory effects on PL at the concentration of $500\;{\mu}g/mL$ with 3.3, 5.2, 34.8, and $11.67\%$ pancreatic lipase activity vs control, respectively. Platycodin D was found to inhibit the PL activity in a dose-dependent manner. Therefore, the anti-obesity effect of Platycodi Radix might be due to the inhibition of pancreatic lipase by its saponins.

Effect of control route on the unstart/restart characteristics of an over-under TBCC inlet

Li, Nan,Chang, Juntao,Tang, Jingfeng,Yu, Daren,Bao, Wen,Song, Yanping Techno-Press 2018 Advances in aircraft and spacecraft science Vol.5 No.4

Numerical simulations have been conducted to study the unstart/restart characteristics of an over-under turbine-based combined-cycle propulsion system (TBCC) inlet during the inlet transition phase. A dual-solution area exists according to the Kantrowitz theory, in which the inlet states may be different even with the same input parameters. The entire transition process was divided into five stages and the unstart/restart hysteresis loop for each stage was also obtained. These loops construct a hysteresis surface which separates the operating space of the engine into three parts: in which a) inlet can maintain a started state; b) inlet keeps an unstarted state; c) inlet state depends on its initial state. During the transition, the operation of the engine follows a certain order with different backpressures and splitter angles, namely control route, which may result in disparate inlet states. Nine control routes with different backpressures and transition stages were designed to illuminate the route-dependent behavior of the inlet. The control routes operating towards the unstart boundary can make the inlet transit from a started state into an unstarted one. But operating backward the same route cannot make the inlet restart, additional effort should be made.

Large-Scale Production of Graphene Nanoribbons from Electrospun Polymers

Liu, Nan,Kim, Kwanpyo,Hsu, Po-Chun,Sokolov, Anatoliy N.,Yap, Fung Ling,Yuan, Hongtao,Xie, Yanwu,Yan, Hao,Cui, Yi,Hwang, Harold Y.,Bao, Zhenan American Chemical Society 2014 JOURNAL OF THE AMERICAN CHEMICAL SOCIETY - Vol.136 No.49

<P>Graphene nanoribbons (GNRs) are promising building blocks for high-performance electronics due to their high electron mobility and dimensionality-induced bandgap. Despite many past efforts, direct synthesis of GNRs with controlled dimensions and scalability remains challenging. Here we report the scalable synthesis of GNRs using electrospun polymer nanofiber templates. Palladium-incorporated poly(4-vinylphenol) nanofibers were prepared by electrospinning with controlled diameter and orientation. Highly graphitized GNRs as narrow as 10 nm were then synthesized from these templates by chemical vapor deposition. A transport gap can be observed in 30 nm-wide GNRs, enabling them to function as field-effect transistors at room temperature. Our results represent the first success on the scalable synthesis of highly graphitized GNRs from polymer templates. Furthermore, the generality of this method allows various polymers to be explored, which will lead to understanding of growth mechanism and rational control over crystallinity, feature size and bandgap to enable a new pathway for graphene electronics.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/jacsat/2014/jacsat.2014.136.issue-49/ja509871n/production/images/medium/ja-2014-09871n_0007.gif'></P><P><A href='http://pubs.acs.org/doi/suppl/10.1021/ja509871n'>ACS Electronic Supporting Info</A></P>