http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Jingjing Gao,Xu Yang,Jian Huang,Kaixiang Peng 제어·로봇·시스템학회 2023 International Journal of Control, Automation, and Vol.21 No.1
Stimulated by the enhancing requirements for system safety as well as process reliability in industrial processes, this paper investigates a subspace aided fault-tolerant control scheme for distributed homogeneous systems with symmetric interconnection pattern. To this end, a decomposition approach is first addressed to show how to convert and decompose the original distributed homogeneous system into a set of independent subsystems. Then, for the independent subsystems, offline subspace predictive controllers and recursive fault-tolerant subspace predictive controllers are designed respectively in a decentralized way. Finally, the controllers designed for the independent subsystems are converted back to the original distributed homogeneous system to achieve its faulttolerant control goal. The effectiveness of the proposed scheme is demonstrated by a case study on a multi-area interconnected power system.
Construct the Multifunction of Cotton Fabric by Synergism between Nano ZnO and Ag
Dangge Gao,Jingjing Liu,Leihong Lyu,Yajuan Li,Jianzhong Ma,Warda Baig 한국섬유공학회 2020 Fibers and polymers Vol.21 No.3
Ag deposited ZnO (Ag/ZnO) nano materials with different Ag molar content were prepared via chemicalprecipitation method. The morphology of nano ZnO was rod like, while the size was 170 nm in length and 30 nm in diameter. Silver nanoparticles were found to be spherical with the diameter about 15 nm. When it deposited on the surface of the nanoZnO, the size of the nano ZnO was almost unchanged when the doping amount is 2.5 %. All the samples were treated oncotton fabric, and the laden fabric had excellent performance on hydrophobicity, including UV resistance, antibacterialactivity and anti-mildew. The contact angle of fabric loaded with 3 % Ag/ZnO was 139 o compare to nano ZnO, which was103 o. The fabric loaded with Ag/ZnO had superior performance of UV resistance. With the increase of depositing amount,the antibacterial rates were promoted; the antibacterial rates against S. aureus, E. coil, and C. albicans of fabric with 3 % Ag/ZnO were promoted to 91 %, 96 % and 98 %. Moreover, Ag/ZnO gave cotton fabrics good anti-mildew performance,especially A. flavus, and its anti-mildew effect could reach 0 grade.
Tao Liu,Jingjing Dong,Chaonan Ye,Xianyan Wu,Wei Fan,Linlin Lu,Jingyu Kang,Xingzhong Gao,Baozhong Sun,Honglei Yi 한국섬유공학회 2022 Fibers and polymers Vol.23 No.12
In this work, the bending modal properties of three-dimensional (3D) braided composites were investigated withthe experimental and numerical methods. Three braided angles were selected to study the braided angle effect on the modalbehavior of 3D braided composites. According to the experimental parameters, a homogeneous model containing the interior,surface and corner representative unit cells of the braided composites were proposed to compute the elastic constants of eachcomposite. Besides, the fiber breakage defects were introduced to the homogeneous model to improve the accuracy ofpredicting the modal behavior of the braided composite. The results indicate that the increase of the braided angle and thefiber breakage defects could apparently reduce the natural frequency of the braided composite. The modal propertiessimulated by the homogeneous models containing some fiber breakage defects could fit well with the correspondingexperimental results. The proposed method to create the homogenous model can be used to predict the modal behavior of the3D braided composites.
Weihong Wu,Jingjing Leng,Zheng Wang,Hongqiang Qu,Jungang Gao 한국고분자학회 2016 Macromolecular Research Vol.24 No.3
Boron-containing bisphenol-S formaldehyde resin (BBPSFR) with different amounts of nano-SiO2 by in situ formation was used to cure o-cresol formaldehyde epoxy resin (o-CFER). The curing kinetics, dynamic mechanical properties, and thermal stability of BBPSFR/o-CFER/nano-SiO2 composites (BCS) were investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetry (TG), and thermogravimetrymass spectrometry (TGMS). Morphology of nano-SiO2-containing BBPSFR and glass fiber laminates of the BCS were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The mechanical properties and electrical properties were also determined. The results showed that nano-SiO2 accelerated the curing process and decreased the curing temperature; the non-isothermal curing kinetics of the BCS can be described by the two-parameter (m, n) Šesták-Berggren kinetic model, and the average value of m was 0.32 and n was 1.00. The thermal stability was enhanced by the addition of nano-SiO2, especially at higher temperatures, and the residual weight increased with increasing nano-SiO2 content. Incorporation of 6 wt% of nano-SiO2 increased the impact strength from 105 to 149 kJ/m2 and storage modulus at ambient from 6.85 to 12.7 GPa, and the TEM photograph of which showed that nano-SiO2 particles (about 50 nm) were dispersed in the matrix more uniformly. The volume resistance, Rv, and dielectric constant, ε, slightly increased when the nano-SiO2 content was 3 wt%.
Zhongyi Han,Peng Gao,Jingjing Ai,Gongju Liu,Hanlin Xiao 한국광학회 2023 Current Optics and Photonics Vol.7 No.5
As an effective means of remotely detecting the spectral information of the object, the spectral calibration for the Savart polarization interference imaging spectrometer (SPIIS) is a basis and prerequisite of information quantification, and its experimental calibration scheme is firstly proposed in this paper. In order to evaluate the accuracy of the spectral information acquisition, the linear interpolation, cubic spline interpolation, and piecewise cubic interpolation algorithms are adopted, and the precision of the quadratic polynomial fitting is the highest, whose fitting error is better than 5.8642 nm in the wavelength range of [500 nm, 820 nm]. Besides, the inversed value of the spectral resolution for the monochromatic light is greater than the theoretical value, and the deviation between them becomes larger with the wavelength increasing, which is mainly caused by the structural design of the SPIIS, together with the rationality of the spectral restoration algorithm and the selection of the maximum optical path difference (OPD). This work demonstrates that the SPIIS has achieved high performance assuring the feasibility of its practical use in various fields.
Volume Compatibility of Interlayer Treatment Materials with Roller-Compacted Concrete
Xiaoliang Zhu,Yuxin Gao,Wenjing Song,Jingjing Xu,Chengyang Li,Zhaoheng Guo,Fang Chen,Rui Zhang 대한토목학회 2022 KSCE Journal of Civil Engineering Vol.26 No.3
Interlayer is the weakest plane of the entire roller-compacted concrete (RCC) structure and is easily deteriorated under the pressure of water and other environmental factors. Shearing force induced by the different shrinkage in interlayer part is the main reason for that poor performance of the RCC. In this paper, the deformation of RCC concrete and interlayer treatment mortar with supplementary cementitious materials (SCMs, including fly ash and silica fume) and double expansive resources admixtures (HME, containing calcium sulphoaluminate (CSA) and CaO) were studied. Deformation of concrete (produced RCC) and interlayer treatment materials was modeled and compared. Porosity characters of interlayer treatment materials and water absorption of interlayer-treated RCC samples were tested. Results showed that the HME significantly reduced the shrinkage of mortar and the deformation difference degree between layers was shortened. Modified interlayer treatment materials with HME could modify the macroscopic properties of RCC, the low porosity of interlayer and water absorption of interlayer-treated RCC was resulted. The suitable HME content is necessary in interlayer treatment materials and which could improve the performance of RCC.
Total Synthesis of Hoiamide A Using an Evans-Tishchenko Reaction as a Key Step
Guo, Yian,Zhou, Jingjing,Gao, Bowen,Zhao, Meng,Yan, Jia-Lei,Xu, Zhengshuang,Choi, Sun,Ye, Tao THE AMERICAN CHEMICAL SOCIETY 2019 ORGANIC LETTERS Vol.21 No.14
<P>The first total synthesis of neurotoxic cyclodepsipeptide hoiamide A (<B>1</B>) has been accomplished. The synthesis features the use of an Evans-Tishchenko fragment coupling between a five-stereogenic-center-containing β-hydroxyketone and a chiral aldehyde derived from threonine.</P> [FIG OMISSION]</BR>
Lihua Wang,Yifei Zhu,Lili Wang,Jingjing Hou,Yongning Gao,Lei Shen,Jingyu Zhang 생화학분자생물학회 2017 Experimental and molecular medicine Vol.49 No.-
Little is known about the effects of chronic alcohol intake on the outcome of acute kidney injury (AKI). Hence, we examined the effects of chronic alcohol intake on the development of renal fibrosis following AKI in an animal model of bilateral renal ischemia–reperfusion (IR) injury. We first found that chronic alcohol exposure exacerbated bilateral IR-induced renal fibrosis and renal function impairment. This phenomenon was associated with increased bilateral IR-induced extracellular matrix deposition and an increased myofibroblast population as well as increased bilateral IR-induced expression of fibrosis-related genes in the kidneys. To explore the mechanisms underlying this phenomenon, we showed that chronic alcohol exposure enhanced β-arrestin 2 (Arrb2) expression and Akt and glycogen synthase kinase-3 (GSK3)β activation in the kidneys. Importantly, pharmacological GSK3 inhibition alleviated bilateral IR-induced renal fibrosis and renal function impairment. Furthermore, we demonstrated that Arrb2− / − mice exhibited resistance to IR-induced renal fibrosis and renal function impairment following chronic alcohol exposure, and these effects were associated with attenuated GSK3β activation in the kidneys. Taken together, our results suggest that chronic alcohol exposure may potentiate AKI via β-arrestin 2/Akt/GSK3β-mediated signaling in the kidney.
Ultrafast epitaxial growth of metre-sized single-crystal graphene on industrial Cu foil
Xu, Xiaozhi,Zhang, Zhihong,Dong, Jichen,Yi, Ding,Niu, Jingjing,Wu, Muhong,Lin, Li,Yin, Rongkang,Li, Mingqiang,Zhou, Jingyuan,Wang, Shaoxin,Sun, Junliang,Duan, Xiaojie,Gao, Peng,Jiang, Ying,Wu, Xiaoson Elsevier 2017 Science bulletin Vol.62 No.15