Pyrophosphate-triggered nanoaggregates with aggregation-induced emission

Li, Chun-Tao,Xu, You-Liang,Yang, Jian-Gong,Chen, Yong,Kim, Hyeong Seok,Cao, Qian-Yong,Kim, Jong Seung Elsevier Sequoia 2017 Sensors and actuators. B Chemical Vol.251 No.-

<P><B>Abstract</B></P> <P>A novel tetraphenylethene-based probe bearing bis-imidazolium anion donors is herein reported for pyrophosphate anion recognition. This probe can self-assemble finite, small sphere nanoaggregates with very weak emission in aqueous solution, and changes into large rod-like nanoaggregates with strong aggregation-induced emission upon binding with the pyrophosphate anion.</P> <P><B>Highlights</B></P> <P> <UL> <LI> A bis-imidazolium functionalized tetraphenylethene probe was prepared. </LI> <LI> This probe self-assemble finite small sphere nanoaggregates in aqueous solution. </LI> <LI> The probe can recognize pyrophosphate anion with strong aggregation-induced emission. </LI> <LI> The probe/pyrophosphate assembly can fluorescence assay alkaline phosphatase. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>A novel nanoaggregates for recognition of pyrophosphate anion with aggregation-induced emission in pure aqueous solution is introduced.</P> <P>[DISPLAY OMISSION]</P>

Research on the motion characteristics of a trans-media vehicle when entering water obliquely at low speed

Li, Yong-li,Feng, Jin-fu,Hu, Jun-hua,Yang, Jian The Society of Naval Architects of Korea 2018 International Journal of Naval Architecture and Oc Vol.10 No.2

This paper proposes a single control strategy to solve the problem of trans-media vehicle difficult control. The proposed control strategy is just to control the vehicle's air navigation, but not to control the underwater navigation. The hydrodynamic model of a vehicle when entering water obliquely at low speed has been founded to analyze the motion characteristics. Two methods have been used to simulate the vehicle entering water in the same condition: numerical simulation method and theoretical model solving method. And the results of the two methods can validate the hydrodynamic model founded in this paper. The entering water motion in the conditions of different velocity, different angle, and different attack angle has been simulated by this hydrodynamic model and the simulation has been analyzed. And the change rule of the vehicle's gestures and position when entering water has been obtained by analysis. This entering water rule will guide the follow-up of a series of research, such as the underwater navigation, the exiting water process and so on.

An experimental investigation on mechanical property and anchorage effect of bolted jointed rock mass

Yong Li,Chao Li,Lei Zhang,Weishen Zhu,Shucai Li,Jian Liu 한국지질과학협의회 2017 Geosciences Journal Vol.21 No.2

Apparent discontinuities can be easily found in natural rock medium owing to the constant motion and change of the Earth’s crust, which contains large amount of discontinuous surfaces such as faults, joints, cracks and so forth. Rock bolt is one of the most effective and economical reinforcing tools in practical geotechnical engineering for a long time. This paper investigates the mechanical properties, anchorage effect, cracking, and coalescence process of intact rock-like specimens, rock-like specimens containing flaws, and bolted rock-like specimens containing flaws. A series of uniaxial compression tests, splitting tests, and biaxial compression tests are performed on these specimens. Some findings can be observed from this study. (1) The number of rock bolt(s) and the anchoring angle have a great influence on the anchorage effect of rock bolt(s). With the increasing number of rock bolt(s), the uniaxial compressive strength (UCS), the splitting peak strength (which can be converted to the tensile strength), and biaxial compressive strength (BCS) can all be improved, whose variation tendencies do not follow a linear relationship. (2) The contributions to the tensile strength for rock bolt is greater than that to the UCS for the same-type specimen. (3) In the biaxial compression tests, with the increasing of the lateral pressures, the anchorage effect of rock bolt gradually declines and the lateral pressure plays a dominant role in improving the strength of the specimen. The failure characteristics of three types of laboratory tests have also been systematically analyzed in this paper.

Eliminating the Third Harmonic Effect for Six Phase Permanent Magnet Synchronous Generators in One Phase Open Mode

Jian Liu,Gui-jie Yang,Yong Li,Hong-wei Gao,Jian-yong Su 전력전자학회 2014 JOURNAL OF POWER ELECTRONICS Vol.14 No.1

To insure stable operation and eliminate twice torque ripple, a topology for a six phase permanent magnet synchronous generator (SP-PMSG) with a neutral point connected together was analyzed in this paper. By adopting an extended transformation matrix, the mathematic model of the space vector control was established. The voltage and torque equations were deduced while considering the third harmonic flux and inductance. In addition, the suppression third harmonic method and the closed loop control strategy were proposed. A comparison analysis indicates that the cooper loss minimum method and the current magnitude minimum method can meet different application requirements. The voltage compensation amount for each of the methods was deduced which also takes into account the third harmonic effect. A simulation and experimental result comparison validates the consistency through theoretical derivation. It can be seen that all of the two control strategies can meet the requirements of post-fault.

Experimental and numerical investigations on the shear behavior of a jointed rock mass

Yong Li,Hao Zhou,Weishen Zhu,Shucai Li,Jian Liu 한국지질과학협의회 2016 Geosciences Journal Vol.20 No.3

The original forming process of the earth crust is companied with internal in situ stress, which gradually complicates while the earth crust evolves with geological conformation movements, leading to the generation of large amounts of faults, joints and fissures. These structural planes, to some extent, remarkably reduce the strengths of rock mass, including the shear behavior. In this paper, the authors report a physical model test on jointed rock mass under direct shear stress state and also adopt a numerical method, Discontinuous Deformation Analysis for Rock Failure (DDARF), to simulate the shear failure process, the variation of stresses and displacements of some key monitoring points. The comparative analysis demonstrates that the numerical results are favorable with those obtained in the physical model test. Therefore, it is concluded that the method of DDARF could effectively simulate the shear behavior of jointed rock mass. Furthermore, other than the original physical model test, the numerical models with echelon joints under different axial loadings are also simulated. The crack initiation, extension, coalescence, and the ultimate shear failure are totally investigated, after which the shear behavior of numerical models in different cases are comparatively analyzed.

Research on the motion characteristics of a trans-media vehicle when entering water obliquely at low speed

Yong-li Li,Jin-fu Feng,Jun-hua Hu,Jian Yang 대한조선학회 2018 International Journal of Naval Architecture and Oc Vol.10 No.2

This paper proposes a single control strategy to solve the problem of trans-media vehicle difficult control. The proposed control strategy is just to control the vehicle's air navigation, but not to control the underwater navigation. The hydrodynamic model of a vehicle when entering water obliquely at low speed has been founded to analyze the motion characteristics. Two methods have been used to simulate the vehicle entering water in the same condition: numerical simulation method and theoretical model solving method. And the results of the two methods can validate the hydrodynamic model founded in this paper. The entering water motion in the conditions of different velocity, different angle, and different attack angle has been simulated by this hydrodynamic model and the simulation has been analyzed. And the change rule of the vehicle's gestures and position when entering water has been obtained by analysis. This entering water rule will guide the follow-up of a series of research, such as the underwater navigation, the exiting water process and so on.

Application of Joint Detection of AFP, CA19-9, CA125 and CEA in Identification and Diagnosis of Cholangiocarcinoma

Li, Yong,Li, Da-Jiang,Chen, Jian,Liu, Wei,Li, Jian-Wei,Jiang, Peng,Zhao, Xin,Guo, Fei,Li, Xiao-Wu,Wang, Shu-Guang Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.8

Objective: To explore the application of joint detection of serum AFP, CA19-9, CA125 and CEA in identification and diagnosis of cholangiocarcinoma (CC). Materials and Methods: The levels of serum AFP, CA19-9, CA125 and CEA of both 30 patients with CC and 30 patients with hepatocellular carcinoma (HCC) were assessed. Receiver operating characteristic (ROC) curves were used to evaluate the diagnostic effects of single and joint detection of those 4 kinds of tumor markers for CC. Results: The levels of serum CA19-9, CA125 and CEA in CC patients were higher than that in HCC patients,whereas that of serum AFP was significantly lower s. The area under ROC curve of single detection of serum AFP, CA19-9, CA125 and CEA were 0.05, 0.86, 0.84 and 0.83, with the optimal cutoff values of 15.4 ng/ml, 125.1 U/ml, 95.7 U/ml and 25.9 ng/ml, correspondingly, and the percentage correct single diagnosis was <79%. With joint detection, the diagnostic effect of combined AFP, CA19-9, CA125 and CEA was the highest, with an area under the ROC curve of 0.94 (95%CI 0.88~0.99). Conclusions: Single detection of serum CA19-9, CA125 and EA is not meaningful. The sensitivity, specificity, the rate of correct diagnosis and the area under ROC curve of joint detection of AFP, CA19-9, CA125 and CEA are highest, indicating that the joint detection of these 4 tumor markers is of great importance in the diagnosis of CC.

Intermedins A and B; New Metabolites from Schisandra propinqua var. intermedia

Li, Hong-Mei,Lei, Chun,Luo, Yong-Ming,Li, Xiao-Nian,Li, Xiao-Lei,Pu, Jian-Xin,Zhou, San-Yun,Li, Rong-Tao,Sun, Han-Dong 대한약학회 2008 Archives of Pharmacal Research Vol.31 No.6

A new dibenzocyclooctadiene lignan, intermedin A (1), and a new natural bisabolane sesquiterpenoid, intermedin B (2), were isolated from the aerial parts of Schisandra propinqua var. intermedia. Their structures were elucidated on the basis of extensive spectroscopical analysis.

Optimization of a Liquid Medium for Beauvericin Production in Fusarium redolens Dzf2 Mycelial Culture

Li-Jian Xu,Li-Gang Zhou,Yuan-Shuai Liu,Jian-Yong Wu 한국생물공학회 2010 Biotechnology and Bioprocess Engineering Vol.15 No.3

Beauvericin (BEA) is a proven and potent antibiotic compound useful for bio-control and a potential antifungal and anticancer agent for human. This study was to evaluate and optimize the nutrient medium for BEA production in mycelial liquid culture of a high BEAproducing fungus Fusarium redolens Dzf2 isolated from a medicinal plant. Among various organic and inorganic carbon and nitrogen sources, glucose and peptone were found the most favorable for the F. redolens Dzf2 mycelial growth and BEA production. Through a Plackett-Burman screening test on a basal medium, glucose, peptone, and medium pH were identified as the significant factors for mycelial growth and BEA production. These factors were optimized through central composite design of experiments and response surface methodology, as 49.0 g/L glucose,13.0 g/L peptone and pH 6.6, yielding 198 mg/L BEA (versus 156 mg/L in the basal medium). The BEA yield was further increased to 234 mg/L by feeding 10 g/L glucose to the culture during exponential phase. The results show that F. redolens Dzf2 mycelial fermentation is a feasible and promising process for production of BEA.

Evaluation of the Geometric Accuracy of Anatomic Landmarks as Surrogates for Intrapulmonary Tumors in Image-guided Radiotherapy

Li, Hong-Sheng,Kong, Ling-Ling,Zhang, Jian,Li, Bao-Sheng,Chen, Jin-Hu,Zhu, Jian,Liu, Tong-Hai,Yin, Yong Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.5

Objectives: The purpose of this study was to evaluate the geometric accuracy of thoracic anatomic landmarks as target surrogates of intrapulmonary tumors for manual rigid registration during image-guided radiotherapy (IGRT). Methods: Kilovolt cone-beam computed tomography (CBCT) images acquired during IGRT for 29 lung cancer patients with 33 tumors, including 16 central and 17 peripheral lesions, were analyzed. We selected the "vertebrae", "carina", and "large bronchi" as the candidate surrogates for central targets, and the "vertebrae", "carina", and "ribs" as the candidate surrogates for peripheral lesions. Three to six pairs of small identifiable markers were noted in the tumors for the planning CT and Day 1 CBCT. The accuracy of the candidate surrogates was evaluated by comparing the distances of the corresponding markers after manual rigid matching based on the "tumor" and a particular surrogate. Differences between the surrogates were assessed using 1-way analysis of variance and post hoc least-significant-difference tests. Results: For central targets, the residual errors increased in the following ascending order: "tumor", "bronchi", "carina", and "vertebrae"; there was a significant difference between "tumor" and "vertebrae" (p = 0.010). For peripheral diseases, the residual errors increased in the following ascending order: "tumor", "rib", "vertebrae", and "carina"; There was a significant difference between "tumor" and "carina" (p = 0.005). Conclusions: The "bronchi" and "carina" are the optimal surrogates for central lung targets, while "rib" and "vertebrae" are the optimal surrogates for peripheral lung targets for manual matching of online and planned tumors.