Extrusion of porous silicon nitride using different binders

Jian-Feng Yang,Guang-Peng Jiang,Ji-Qiang Gao 한양대학교 세라믹연구소 2010 Journal of Ceramic Processing Research Vol.11 No.1

Porous silicon nitride ceramics were prepared using an extrusion process. Starch and thermoset phenol-formaldehyde resin were used as binders. The effect of the different binders on the microstructure and mechanical strength of the porous silicon nitride were investigated in detail. It is shown that the microstructure was more uniform when phenol-formaldehyde resin was used as the binder. In contrast, the pore size distribution was bimodal when starch was used. Furthermore, the flexural strength of porous Si3N4 using resin as the binder was higher than that using the starch.

Apply Partition Tree to Compute Canonical Labelings of Graphs

HAO Jian-Qiang,GONG Yun-Zhan,Tan Li,Duan Da-Gao 보안공학연구지원센터 2016 International Journal of Grid and Distributed Comp Vol.9 No.5

This paper establishes a theoretical framework by defining a set of concepts useful for classifying graphs and computing the canonical labeling Cmax(G) of a given undirected graph G, which including the partition tree PartT(G), maximum partition tree MaxPT(G), centre subgraph Cen(G), standard regular sequence SRQ(G), standard maximum regular sequence SMRQ(G), and so on. The implementations of algorithms 1 to 5 show how to calculate them accordingly. The worst time complexities of algorithms 1, 2, 4, and 5 are O(n2) respectively. The time complexity of Algorithm 3 is O(n). By Theorem 3, all leaf nodes of PartT(G) and MaxPT(G) are the regular subgraphs. By Theorem 4 and 5, there exists only one Cen(G) in G. Regular Partition Theorem 6 shows that there exists just one corresponding PartT(G), SRQ(G), MaxPT(G), and SMRQ(G). One can use Classification Theorem 7 to category graphs. Theorem 8 and 9 establish the link between the Cen(G) and the calculation of the first node u1 added into MaxQ(G) corresponding to the canonical labeling Cmax(G) of G. Further, it utilizes the Cen(G) to calculate the first node u1 added into MaxQ(G). The proposed methods can be extended to deal with the directed graphs and weighted graphs.

Effective removal of anilines using porous activated carbon based on ureaformaldehyde resin

Fu-Qiang An,Dong Zhang,Xiao-Xia Yue,Guo-Li Ou,Jian-Feng Gao,Tuo-Ping Hu 한국화학공학회 2016 Korean Journal of Chemical Engineering Vol.33 No.2

The effective removal of aniline and its derivatives from wastewater is very important due to the high toxicity. Adsorption with a high-performance adsorbent is an efficient pathway. A novel activated carbon, ACUF-700, was synthesized using homemade ureaformaldehyde resin as the major carbon source carbonized at 700 oC. ACUF-700 is characterized by surface area analyzer, FTIR, elemental analyzer, and SEM. The adsorption properties of ACUF-700 towards anilines are also investigated by using batch methods. The test results showed that the ACUF-700 possesses higher specific surface area and narrower pore size distribution. In virtue of its developed pore structure and nitrogencontaining chemical groups, the adsorption capacities towards aniline, p-toluidine and p-chloroaniline could reach 95.6, 108.1 and 128.9mg/g, respectively. The adsorption process could be well described by the intra-particle mass transfer diffusion model and Sips model. Besides, ACUF700 was regenerated easily using diluted hydrochloric acid solution as eluent and ACUF700 possesses better reusability.

Selective Removal of Al(III) from Rare Earth Solutions Using Peas-based Activated Carbon

Fu-Qiang An,Rui-Yan Wu,Zhi-Guo Yuan,Tuo-Ping Hu,Jian-Feng Gao 대한화학회 2017 대한화학회지 Vol.61 No.5

Efficiently removing Al(III) from rare earth is very significant because even trace amount of Al(III) can cause serious harm to the rare earth materials. In this paper, a nitrogen-containing activated carbon, AC-P700, was synthesized using peas as raw materials. The AC-P700 was characterized by surface area analyzer, FT-IR, and XPS methods. The adsorption and recognition properties of AC-P700 towards Al(III) were investigated, and the recognition mechanism was also analyzed. The BET special surface area of AC-P700 was 1277.1 m2·g−1, and the average pore diameter was 1.90 nm. The AC-P700 possesses strong adsorption affinity and excellent recognition selectivity towards Al(III). The adsorption capacity for Al(III) could reach to 0.53 mmol·g−1, and relative selectivity coefficients relative to La(III) and Ce(III) is 9.6 and 8.7, respectively. Besides, ACP700 possesses better regeneration ability and reusability.

DNA methylation levels in different tissues in tea plant via an optimized HPLC method

Ying Gao,Jia-Li Hao,Zhen Wang,Kwan-Jeong Song,Jian-Hui Ye,Xin-Qiang Zheng,Yue-Rong Liang,Jian-Liang Lu 한국원예학회 2019 Horticulture, Environment, and Biotechnology Vol.60 No.6

DNA methylation is one of the most important events in epigenetics and significantly influences plant growth and development. In the present study, we established and optimized a high-performance liquid chromatography method for detecting the base composition in DNA in tea plant (Camellia sinensis L.) tissues by using saline buffers-free mobile phases. The DNA methylation level varied with tea plant tissue, cultivar, and growth stage. A relatively higher DNA methylation level was observed in tender leaf (38.34%) and pistil (38.19%) tissues, while a relatively low level was detected in capillary root (19.45%), stamen (19.61%), and old leaf (20.70%) tissues. The pattern of the methylation level formed a saddle curve during the growth of dormant buds in spring; the lowest point appeared at the stage of one leaf and a bud. The methylation level in the adventitious buds regenerated from the branch after pruning seemed to decrease with an increase in the degree of pruning. These DNA methylation levels might be associated with the development of tea plant.

Selective Removal of Al(III) from Rare Earth Solutions Using Peas-based Activated Carbon

An, Fu-Qiang,Wu, Rui-Yan,Li, Min,Yuan, Zhi-Guo,Hu, Tuo-Ping,Gao, Jian-Feng Korean Chemical Society 2017 대한화학회지 Vol.61 No.5

Efficiently removing Al(III) from rare earth is very significant because even trace amount of Al(III) can cause serious harm to the rare earth materials. In this paper, a nitrogen-containing activated carbon, AC-P700, was synthesized using peas as raw materials. The AC-P700 was characterized by surface area analyzer, FT-IR, and XPS methods. The adsorption and recognition properties of AC-P700 towards Al(III) were investigated, and the recognition mechanism was also analyzed. The BET special surface area of AC-P700 was $1277.1m^2{\cdot}g^{-1}$, and the average pore diameter was 1.90 nm. The AC-P700 possesses strong adsorption affinity and excellent recognition selectivity towards Al(III). The adsorption capacity for Al(III) could reach to $0.53mmol{\cdot}g^{-1}$, and relative selectivity coefficients relative to La(III) and Ce(III) is 9.6 and 8.7, respectively. Besides, AC-P700 possesses better regeneration ability and reusability.

Processing, microstructure and mechanical properties of porous silicon nitride by a slip casting method using petroleum coke as pore former

Huan-Rui Wang,Ji-Qiang Gao,Fang-Li Yu,Yuan Li,Jian-Feng Yang 한양대학교 세라믹연구소 2009 Journal of Ceramic Processing Research Vol.10 No.6

In this study, porous Si3N4 ceramics were obtained by a slip casting method which would be easier applied in industry. The most stable and dispersing aqueous suspension was obtained from a solid slurry content of 56.2%, a carboxymethyl cellulose concentration of 0.3% as the adhesive and 0.05% glycerol as the defoamer. Petroleum coke was used as pore-former, and at the same time, it was helpful for the stability of the suspension. The burning-out of the petroleum coke seemed to be an economical way for increasing the porosity of porous Si3N4. After sintering at 1,800℃ for 2 h, samples with a pore size about 10 μm, porosities of 45-60%, and flexural strength of 52.0-112.1MPa were obtained. In this study, porous Si3N4 ceramics were obtained by a slip casting method which would be easier applied in industry. The most stable and dispersing aqueous suspension was obtained from a solid slurry content of 56.2%, a carboxymethyl cellulose concentration of 0.3% as the adhesive and 0.05% glycerol as the defoamer. Petroleum coke was used as pore-former, and at the same time, it was helpful for the stability of the suspension. The burning-out of the petroleum coke seemed to be an economical way for increasing the porosity of porous Si3N4. After sintering at 1,800℃ for 2 h, samples with a pore size about 10 μm, porosities of 45-60%, and flexural strength of 52.0-112.1MPa were obtained.

Clinical practice guidelines and real-life practice in hepatocellular carcinoma: A Chinese perspective

Diyang Xie,Jieyi Shi,Jian Zhou,Jia Fan,Qiang Gao 대한간학회 2023 Clinical and Molecular Hepatology(대한간학회지) Vol.29 No.2

Liver cancer is the fourth most prevalent and the second most lethal cancer in China. Hepatitis B virus (HBV) infection represents a major risk factor for hepatocellular carcinoma (HCC). Liver ultrasonography plus alpha-fetoprotein every 6 months continues to be the predominant surveillance modality. The age-Male-ALBI-Platelets score was recommended in the recent 2022 Chinese guidelines to predict HCC occurrence. The Chinese liver cancer (CNLC) staging system proposed in the 2017 guidelines continues to be the standard model for staging with modifications in the treatment allocations. Considering the aggressive nature of HBV-associated HCC, multimodal and high-intensity strategies like the addition of immunotherapy-based systemic treatment to local therapies, including resection, ablation, and intra-arterial therapies, have been adopted in real-life practices in China. The latest Chinese guidelines recommend atezolizumab plus bevacizumab, suntilimab plus a bevacizumab analog, lenvatinib, sorafenib, donafenib, and FOLFOX (folinic acid, fluorouracil, and oxaliplatin) chemotherapy as first-line treatment without priority. Regorafenib, apatinib, camrelizumab, and tislelizumab have been added as second-line systemic therapies for patients who progressed on sorafenib. Systemic therapies adopted in real-life practice are sophisticated with various combination modalities and different sequences.

Detection of gas-solid flow faults of a circulating fluidized bed using pressure fluctuations in wind caps

Hua-wei Jiang,Jian-qiang Gao,Hong-wei Chen,Jun-fu Lu,Fu-mao Wang,Yang Wang,Zhen-xin Wu 한국화학공학회 2016 Korean Journal of Chemical Engineering Vol.33 No.7

Wind cap partial blockages and agglomeration are two of the most common gas-solid flow faults that occur under the actual operations of circulating fluidized bed boilers. Using the method of measuring pressure fluctuations, for the characterization of fluid dynamics in fluidized beds, has a great advantage, due to its flexible adaptation to any operating conditions to monitor fluidization. This paper presents research into the use of measuring and analyzing pressure fluctuations in wind caps, for the analysis of the gas-solid fluidization characteristics in a fluidized bed with wind cap partial blockages or agglomeration fault. Partial blockages in a wind cap near feeding side and partial blockages in another wind cap near recycling side as well as agglomeration of different extents were simulated in a cold circulating fluidized bed. Pressure fluctuations in the inlets of several wind caps were measured at different primary air velocities under different fault conditions. They were then analyzed with the methods of statistical average, standard deviation, wavelet analysis and homogeneous index. Based on the calculated characteristic parameters, the effects of gas-solid flow faults on the gas-solid fluidization characteristics were analyzed. Results showed that variations of characteristic parameters of pressure fluctuations were related to variations of the gas-solid flow condition, which were caused by wind cap partial blockages or agglomerations. It is shown that the proposed method is practical.

Preparation and Characterization of Paclitaxel-Loaded PLGA Nanoparticles Coated with Cationic SM5-1 Single-chain Antibody

( Geng Kou ),( Jie Gao ),( Hao Wang ),( Huai Wen Chen ),( Bo Hua Li ),( Da Peng Zhang ),( Shu Hui Wang ),( Sheng Hou ),( Wei Zhu Qian ),( Jian Xin Dai ),( Yan Qiang Zhong ),( Ya Jun Guo ) 생화학분자생물학회 2007 BMB Reports Vol.40 No.5