http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Chin-Hsiung Loh,Yu-Ting Huang,Wan-Ying Hsiung,Yuan-Sen Yang,Kenneth J. Loh 한국풍공학회 2015 Wind and Structures, An International Journal (WAS Vol.21 No.6
In this study, the geometrical setup of a turbine blade is tracked. A research-scale rotating turbine blade system is setup with a single 3-axes accelerometer mounted on one of the blades. The turbine system is rotated by a controlled motor. The tilt and rolling angles of the rotating blade under operating conditions are determined from the response measurement of the single accelerometer. Data acquisition is achieved using a prototype wireless sensing system. First, the Rodrigues' rotation formula and an optimization algorithm are used to track the blade rolling angle and pitching angles of the turbine blade system. In addition, the blade flapwise natural frequency is identified by removing the rotation-related response induced by gravity and centrifuge force. To verify the result of calculations, a covariance-driven stochastic subspace identification method (SSI-COV) is applied to the vibration measurements of the blades to determine the system natural frequencies. It is thus proven that by using a single sensor and through a series of coordinate transformations and the Rodrigues' rotation formula, the geometrical setup of the blade can be tracked and the blade flapwise vibration frequency can be determined successfully.
Loh, Chin-Hsiung,Huang, Yu-Ting,Hsiung, Wan-Ying,Yang, Yuan-Sen,Loh, Kenneth J. Techno-Press 2015 Wind and Structures, An International Journal (WAS Vol.21 No.6
In this study, the geometrical setup of a turbine blade is tracked. A research-scale rotating turbine blade system is setup with a single 3-axes accelerometer mounted on one of the blades. The turbine system is rotated by a controlled motor. The tilt and rolling angles of the rotating blade under operating conditions are determined from the response measurement of the single accelerometer. Data acquisition is achieved using a prototype wireless sensing system. First, the Rodrigues' rotation formula and an optimization algorithm are used to track the blade rolling angle and pitching angles of the turbine blade system. In addition, the blade flapwise natural frequency is identified by removing the rotation-related response induced by gravity and centrifuge force. To verify the result of calculations, a covariance-driven stochastic subspace identification method (SSI-COV) is applied to the vibration measurements of the blades to determine the system natural frequencies. It is thus proven that by using a single sensor and through a series of coordinate transformations and the Rodrigues' rotation formula, the geometrical setup of the blade can be tracked and the blade flapwise vibration frequency can be determined successfully.
Ultrahigh Vacuum Technologies Developed for a Large Aluminum Accelerator Vacuum System
Hsiung, G.Y.,Chang, C.C.,Yang, Y.C.,Chang, C.H.,Hsueh, H.P.,Hsu, S.N.,Chen, J.R. The Korean Vacuum Society 2014 Applied Science and Convergence Technology Vol.23 No.6
A large particle accelerator requires an ultrahigh vacuum (UHV) system of average pressure under $1{\times}10^{-7}$ Pa for mitigating the impact of beam scattering from the residual gas molecules. The surface inside the beam ducts should be controlled with an extremely low thermal outgassing rate under $1{\times}10^{-9}Pa{\cdot}m^3/(s{\cdot}m^2)$ for the sake of the insufficient pumping speed. To fulfil the requirements, the aluminum alloys were adopted as the materials of the beam ducts for large accelerator that thanks to the good features of higher thermal conductivity, non-radioactivity, non-magnetism, precise machining capability, et al. To put the aluminum into the large accelerator vacuum systems, several key technologies have been developed will be introduced. The concepts contain the precise computer numerical control (CNC) machining process for the large aluminum ducts and parts in pure alcohol and in an oil-free environment, surface cleaning with ozonized water, stringent welding process control manually or automatically to form a large sector of aluminum ducts, ex-situ baking process to reach UHV and sealed for transportation and installation, UHV pumping with the sputtering ion pumps and the non-evaporable getters (NEG), et al. The developed UHV technologies have been applied to the 3 GeV Taiwan Photon Source (TPS) and revealed good results as the expectation. The problems of leakage encountered during the assembling were most associated with the vacuum baking which result in the consequent trouble shootings and more times of baking. Then the installation of the well-sealed UHV systems is recommended.
The 5p15.33 Locus Is Associated with Risk of Lung Adenocarcinoma in Never-Smoking Females in Asia
Hsiung, Chao Agnes,Lan, Qing,Hong, Yun-Chul,Chen, Chien-Jen,Hosgood III, H. Dean,Chang, I-Shou,Chatterjee, Nilanjan,Brennan, Paul,Wu, Chen,Zheng, Wei,Chang, Gee-Chen,Wu, Tangchun,Park, Jae Yong,Hsiao, Public Library of Science 2010 PLoS genetics Vol.6 No.8
<▼1><P>Genome-wide association studies of lung cancer reported in populations of European background have identified three regions on chromosomes 5p15.33, 6p21.33, and 15q25 that have achieved genome-wide significance with p-values of 10<SUP>−7</SUP> or lower. These studies have been performed primarily in cigarette smokers, raising the possibility that the observed associations could be related to tobacco use, lung carcinogenesis, or both. Since most women in Asia do not smoke, we conducted a genome-wide association study of lung adenocarcinoma in never-smoking females (584 cases, 585 controls) among Han Chinese in Taiwan and found that the most significant association was for rs2736100 on chromosome 5p15.33 (p = 1.30×10<SUP>−11</SUP>). This finding was independently replicated in seven studies from East Asia totaling 1,164 lung adenocarcinomas and 1,736 controls (p = 5.38×10<SUP>−11</SUP>). A pooled analysis achieved genome-wide significance for rs2736100. This SNP marker localizes to the <I>CLPTM1L</I>-<I>TERT</I> locus on chromosome 5p15.33 (p = 2.60×10<SUP>−20</SUP>, allelic risk = 1.54, 95% Confidence Interval (CI) 1.41–1.68). Risks for heterozygote and homozygote carriers of the minor allele were 1.62 (95% CI; 1.40–1.87), and 2.35 (95% CI: 1.95–2.83), respectively. In summary, our results show that genetic variation in the <I>CLPTM1L-TERT</I> locus of chromosome 5p15.33 is directly associated with the risk of lung cancer, most notably adenocarcinoma.</P></▼1><▼2><P><B>Author Summary</B></P><P>Worldwide, approximately 15% of lung cancer cases occur among nonsmokers. Genome-wide association studies (GWAS) of lung cancer conducted in populations of European background have identified three regions on chromosomes 5, 6, and 15 that harbor genetic variants that confer risk for lung cancer. Prior studies were conducted primarily in cigarette smokers, raising the possibility that the associations could be related to tobacco use, lung carcinogenesis, or both. A GWAS of lung cancer among never-smokers is an optimal setting to discover effects that are independent of smoking. Since most women in Asia do not smoke, we conducted a GWAS of lung adenocarcinoma among never-smoking females (584 cases, 585 controls) in Taiwan, and observed a region on chromosome 5 significantly associated with risk for lung cancer in never-smoking women. The finding was independently replicated in seven studies from East Asia totaling 1,164 lung adenocarcinomas and 1,736 controls. To our knowledge, this study is the first reported GWAS of lung cancer in East Asian women, and together with the replication studies represents the largest genetic association study in this population. The findings provide insight into the genetic contribution of common variants to lung carcinogenesis.</P></▼2>
Kai-Hsiung Ko,Hsian-He Hsu,Woei-Yau Kao,Ching-Feng Chang,Ming-Fang Cheng,Guo-Shu Huang 대한영상의학회 2009 Korean Journal of Radiology Vol.10 No.1
The radiological appearance of diffuse discrete pulmonary nodules associated with cryptogenic organizing pneumonia (COP) has been rarely described. We describe a case of COP in 49-year-old woman with acute myeloid leukemia who developed diffuse pulmonary nodules during the second course of induction chemotherapy. The clinical status of the patient and imaging findings suggested the presence of a pulmonary metastasis or infectious disease. A video-assisted thoracoscopic lung biopsy resulted in the unexpected diagnosis of COP as an isolated entity. Steroid therapy led to dramatic improvement of the clinical symptoms and the pulmonary lesions. The radiological appearance of diffuse discrete pulmonary nodules associated with cryptogenic organizing pneumonia (COP) has been rarely described. We describe a case of COP in 49-year-old woman with acute myeloid leukemia who developed diffuse pulmonary nodules during the second course of induction chemotherapy. The clinical status of the patient and imaging findings suggested the presence of a pulmonary metastasis or infectious disease. A video-assisted thoracoscopic lung biopsy resulted in the unexpected diagnosis of COP as an isolated entity. Steroid therapy led to dramatic improvement of the clinical symptoms and the pulmonary lesions.