http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
耐故障性 및 動적 再經路選澤 CSMP 多段相互接續網에 관한 硏究
林濟鐸,金明洙 서울산업대학교 산업대학원 1993 大學院論文集 Vol.2 No.-
내고장성 및 동적 재경로선택 특성을 갖는 CSMP 다중경로 다단상호접속망을 제안한다. 단의 수 및 단 사이의 링크 수는 단일경로 다단상호접속망과 같은 수준으로 구성되므로, 기존의 다중경로접속망들에 비하여 전반적인 하드웨어 복잡도가 상당히 감소되는 효과를 얻는다. 이 CSMP 접속망은 동일단에 속하는 스위치 소자들끼리 연결되어 루프를 이루는 것이 특징이다. 이 접속망은 첫단과 끝단을 포함하여 모든 단에서 발생하는 스위치 고장을 (N/4) * (log₂N-1)개까지 허용할 수 있다.(N: 입력의 수) 이 접속망의 신뢰도를 평가하기 위하여 terminal reliability(TR) 및 mean time to failute(MTTF)를 산출하여 다른 정적 및 동적 재경로선택 다중경로접속망들의 신뢰도와 비교 하였다. 제안한 접속망들의 성능을 BW 및 PA를 구하여 해석하고 하드웨어 복잡도가 더 높은 다른 다중경로 MIN들의 성능과 비교하였다. 또한 신뢰도 및 성능 대비용효율을 평가하여 이 접속망이 기존에 제안된 다중 경로 MIN들보다 더 효율적임을 입증하였다. A multipath MIN(Multistage Interconnection Networ), CSMP(Chained Shuffle Multi-Path) network, is proposed, having fault-tolerance and dynamic reroutability. The number of stages and the number of links between adjacent stages are the same as in single path MINs, so the overall hardware complexity is considerably reduced in comparison with other multipath MINs. The CSMP networks feature links between switches belonging to the same stage, forming loops of switches. The network can tolerate multiple faults, up to (N/4) * (log₂N-1), having occured in any stages including the frist and the last ones(N: NO. of input). To analyze reliability, terminal reliability(TR) and mean time to failure(MTTF) age given for the networks, and the TR figures are compared to those of other static and dynamic rerouting multipath MINs. Also the MTTF figures are compared. The performance of the proposed network with respect to its bandwidth(BW) and probability of acceptance (PA) is analyzed and is compared to that of other more complex multipath MINs. The cost efficiency analysis of reliability and perfor mance show that the network is more costeffective than other previously proposed fault-tolerant multipath MINs.
LIM, CHAE TAK 全北大學校 1964 論文集 Vol.6 No.-
發振器의 同調回路에 치탄酸바리움 强誘電體 蓄電器를 揷入하고 그 靜電容量을 入力信號에 依해서 變化하면 發振周波數는 信號波에 依하여 偏差을 일으키므로 周波數變調를 할 수 있다. 치탄酸바리움 强誘電體 蓄電器를 使用한 周波數 變調器는 信號波에 對한 人力 임피단스가 매우 크므로 消費電力은 거의 零이 되며 變調를 깊게 걸 수 있으며 그 위에 變調感度도 좋고 歪가 작고 簡單 그리고 小形化할 수 있는 利点을 갖고 있으나 反面 動作이 多小 不安定하고 搬送周波數에 對한 上限은 200∼300MC 程度이며 溫度特性이 좋지 않은 欠点이 있다. 이들은 動作点을 適當히 選定하고 탕크回路에 若干의 變化를 해줌으로서 相當히 滿足할 만한 結果를 얻을 수 있다. 0.1mm의 치탄酸바리움 强誘電體 蓄電器를 使用했을 때 靜的動作点을 75∼200볼트 內에 選定하면 信號電壓에 線型으로 動作하고, 溫度의 影響을 받지 않으며 損失이 적은 變調器를 얻으며 中心 周波數 50MC에서 100KC의 周波數偏移를 얻을 수 있다.