http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
퍼스널 컴퓨터에 의한 냉간단조 공정 및 금형설계의 자동화에 관한 연구( I )
최재찬,김병민,진인태,김형섭 대한기계학회 1988 대한기계학회논문집 Vol.12 No.4
본 연구에서는 프레스에 의한 축대칭 냉간단조품의 자동공정설계 및 금형설계 를 위한 대화식 프로그램인 "COLD-FORMING"과 "DESIGN-DIE"의 개발에 대하여 설명한다. 프로그램의 능력은 "COLD-FORMING"에서는 (1) 중실부품의 냉간단조에 있어서 작업 순 서의 해석과 각 단계에 포함된 개별작업의 인식 (2)중간 예비성형단계의 형상 및 치수 결정 (3) 각각의 성형단계에서의 성형하중계산 (4) 작업지시서를 위한 그래픽 출력 등 이며, "DESIGN-DIE"에서는 앞의 공정설계에서 구해진 결과를 이용하여 (1) 성형에 필 요한 다이세ㅌ의 형상, 재질 및 최적 치수를 결정 (2) 다이세ㅌ의 그래픽 출력 등을 할 수 있다. 및 최적 치수를 결정 (2) 다이세ㅌ의 그래픽 출력 등을 할 수 있다. This paper describes some development of computer-aided system called "COLD-FORMING" and "DESIGN-DIE". "COLD-FORMING" is designed for the forming sequence and "DESIGN-DIE" for the die design of press forming rotationally symmetric parts. The computer program developed is used in interactive and written in BASIC. Design rules for process planning and die design are formulated from process limitations, plasticity theory and know-how of experience of the field. "COLD-FORMING" capabilities include (1) analysis of forming sequence and recognition of individual operation involved each step, (2) determination of intermediate shape and dimensions, (3) calculation of forming loads to perform each forming operation and (4) graphic out put for the operation sheet. "DESIGN-DIE" capabilities include (1) optimum die design corresponding to the output of "COLD-FORMING" and (2) graphic output for the die design.of "COLD-FORMING" and (2) graphic output for the die design.ie design.
최재찬 대한기계학회 1990 大韓機械學會誌 Vol.30 No.1
공정설계 및 금형설계의 자동화, 계측, 제어 등과 같은 일련의 작업들이 종래에는 대형의 컴퓨터 에 의하여 행하여졌지만 전자산업의 빠른 진보로 퍼스널컴퓨터에 의해서도 충분히 설계를 행할 수 있게 되었다. 특히 퍼스널컴퓨터의 이용은 대형컴퓨터에 비하여 적은 비용으로 설치가 가능 하며, 이용이 용이하고, 작은 공간을 차지하므로 많은 이점을 갖고 있다.
PC에 의한 냉간단조 공정 및 금형설계의 자동화에 관한 연구 II
최재찬,김병민,김형섭,허만조 대한기계학회 1989 대한기계학회논문집 Vol.13 No.1
본 연구는 PC(personal computer)를 이용한 냉간단조 프레스용 축대칭 1,2단 원형 컵 제품의 공정설계 및 금형설계를 위한 대화식 프로그램인 "CUP- FORMING"과 "CUP-DIE"의 개발에 대하여 설명한다.quot;의 개발에 대하여 설명한다. Some Developments in computer aided procedures for cold forging process and tool design of rotationally symmetric cup shape parts are described. The developed system enables appropriate forging sequence to be determined automatically, together with details of corresponding preform, die and punch design. The computer program developed is interactive and written in BASIC. This system not only assist the heavy work of designers but greatly shorten the time of design.
최재찬,이성진,박봉수,Choi, Jae-Chan,Lee, Sung-Jin,Park, Bong-Su 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.4
In this study, in order to achieve the uniformity of mechanical properties and microstructures of a hot-rolled coil in the transversal direction, the edge mask device is newly device is newly developed and installed at the upper laminar-flow cooling head in the run out table, which controls the transversal temperature of strip with enco panel and bar edge heater. The device that is transversally movable prevents the temperature drop of strip edge by blocking the cooling water into the strip edge. So, the pattern of edge mask set-up condition of the device was derived by analyzing the characteristics of strip temperature and mechanical properties according to the on-line application of edge mask.