http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조민경(Mingyoung Cho),김진용(Jinyong Kim),박성한(Sunghan Park) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
본 연구에서는 침식연소를 고려한 내탄도 프로그램을 이용하여 침식연소 모델에 따른 해석결과를 비교하였다. 또한 그레인 형상 변화에 따른 침식연소 경향 변화를 고찰하기 위해 동일 추진제를 적용한 이형 그레인의 시험 결과와 해석결과를 비교하였다. 비교 결과 침식연소 상수인 값이 연소면적에 비례하며 그레인 단면적과는 반비례하게 변화하는 것을 확인 하였다. Two erosive burning model was applied to compare analysis results of a internal ballistic. By comparing motor tests with analysis results, variance of a grain shape was analyzed and coefficients of erosive burning were drew. Compared results showed that the coefficient of erosive burning were proportional to the change of burning area but inversely proportional to the change of cross area.
펄스형 플라즈마 추력기 성능해석을 위한 테프론의 이온화 비정상 모델링 연구
조민경(Mingyoung Cho),성홍계(Hong Gye Sung) 한국항공우주학회 2017 韓國航空宇宙學會誌 Vol.45 No.8
펄스형 플라즈마 추력기의 성능해석을 위해 Teflon의 승화와 이온화 모델링을 수행하였다. PPT 작동 시 발생하는 방전 전휴의 변화를 예측하기 위해 일차원 lumped circuit model을 적용하였으며 Mickeal Keidar가 제시한 테플론-플라즈마 온도에 따른 테플론 승화 모델을 적용하였다. Saha 방정식을 이용하여 테플론 구성 원소인 탄소와 불소분자의 이온화를 예측하였다. 프로그램 검증을 위해 선행실험 결과와 비교하여 유사함을 확인하였으며 PPT 작동 전압에 따른 전류 변화정도를 고찰하였다. A teflon ionization modeling has been conducted to predict the performance of a PPT(Pulsed Plasma Thruster). One dimensional unsteady circuit model and Teflon ablation model were implemented. The Saha equation was adapted to predict the ionization of Carbon and Fluorine gas. The lumped circuit model including a resistance and a inductance model of a plasma was adapted to predict the magnitude of a discharge current. Numerical simulation results had good agreements with pervious research. The degree of current change according to PPT operating voltage was examined.
조민경(Mingyoung Cho),김진용(Jinyong Kim),박성한(Sunghan Park) 한국추진공학회 2014 한국추진공학회지 Vol.18 No.3
Two erosive burning models were applied to compare analysis results of ballistic for the internal ballistics of solid rocket motors. By comparing motor tests with results of analysis, the variance of a grain shape was analyzed and coefficients of erosive burning were drawn. Results of comparison presents that the coefficient of erosive burning was proportional to the change of burning area, while inversely proportional to the change of cross area.
디스크형 유체역학적 방향제어 시스템 성능해석 및 설계 인자 민감도 분석
조민경(Mingyoung Cho),한두희(Doohee Han),성홍계(Hong-Gye Sung),최현영(Hyun Yung Choi) 한국추진공학회 2016 한국추진공학회지 Vol.20 No.3
A performance analysis program of a disk type fluidic valve was developed to predict a chamber pressure and a response time. A parametric study of this device was performed by using scattering plot method. A sensitivity of Mach number at a nozzle outlet showed the highest value about a outlet diameter of nozzle. An inlet flow rate is the most important parameter to design the fluidic valve because it has high sensitivity value both a outlet velocity and a response time.