http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
휴대폰 환경에서의 홍채 인식을 위한 홍채 코드 추출에 관한 연구
정대식 ( Dae-sik Jung ),박강령 ( Kang Ryoung Park ) 한국정보처리학회 2005 한국정보처리학회 학술대회논문집 Vol.12 No.1
최근 휴대폰의 활용 범위는 단순히 사용자간의 통신이라는 기본적인 목적을 넘어서 다양한 기능을 제공하고 있다. 그중 휴대폰에 카메라를 탑재하여 디지털 카메라의 기능을 혼합한 휴대폰은 최근 각광을 받고 있으며 휴대폰에 탑재된 카메라의 기능은 디지털 카메라의 메가 픽셀 급 화질을 제공하는 정도의 수준으로 발전하였으며 이미 그 수요는 대중화되어 가고 있다. 이런 카메라 폰을 응용한 연구 분야로 생체 인식 기술을 적용할 수 있으며, 본 논문에서는 휴대폰 환경에서의 홍채 인식을 위한 홍채 영역에서의 홍채 코드 추출에 관한 방법을 제안한다. 휴대폰에서의 홍채 인식에 사용되는 홍채 코드 추출 과정은 다음과 같다. 먼저 휴대폰 카메라를 통해 얻은 메가 픽셀 급 영상(2048x1536 pixel 8bit gray Image)에서 동공위치 추적 & 홍채 영역 추출 알고리즘[1]을 이용하여 눈 영상(640x480 pixel 8bit gray Image))을 추출한다. 이렇게 추출된 눈 영상 중에 홍채 코드 인식 에러율을 좀더 낮추기 위해 눈썹영역, 안경에 의해 반사되는 반사광(Specular Reflection), 눈꺼풀 영역을 눈 영역에서 제거 하는 과정을 거친다. 이 논문에서는 위와 같은 과정을 거쳐 얻어진 홍채 영상에 그대로 극좌표 가버 필터[2]를 씌워 홍채 코드를 추출해내기 때문에 기존 보간법을 이용한 스트레칭 된 홍채 영상에서의 홍채 코드 추출보다 잘못된 홍채 코드 정보를 줄일 수 있으며 휴대폰이라는 특수한 환경에서의 홍채 코드 추출이란 점을 고려하여 가버 필터를 고주파와 저주파로 나누어 미리 설계해두어 좀더 빠르고 정확한 홍채 코드를 추출해 내는 방법을 제안한다. 실험 결과, 기존 방식보다 극좌표 가버 필터를 사용한 홍채 코드 추출 실험에서 보다 높은 인식률을 보였다.
김봉환(Bong-Hwan Kim),정대식(Dae-Sik Jung) 한국기계가공학회 2009 한국기계가공학회지 Vol.8 No.4
Air drying technology was developed as an equipment for reducing of moisture content from wastewater treatment and waterworks sludge cake and reproducing it by reusable matter. Advantage of cyclone type pneumatic dehydrator is simple and excellent drying performance. The air drying equipment was composed to the air ejector which made high-speed fluid field, and cyclone which made circling fluid field. Dewatered cake was crushed at the high-speed zone as first step, and formed with dried powder of sphere shape by the collision between particles at the circling fluid zone. In this study, a CFD analysis has been performed to predict air-sludge particles flow in cyclone and ejector of pneumatic dehydrator. The computational results showed typical Rankine vortex structure which was frequently found in swirling flow phenomena. And the conical type wedge in lower part of a cyclone prevented accumulation of the sludge particles in the cyclone. Therefore, this technology was effective in drying of dehydrated cake of waterworks sludge.
안국찬(Kook-Chan Ahn),정대식(Dae-Sik Jung),김봉환(Bong-Hwan Kim) 한국기계가공학회 2011 한국기계가공학회지 Vol.10 No.1
A study was performed to investigate the dynamic behaviors of fiber-reinforced composite materials subjected to transversely low-velocity impact. For this purpose, the simulation of modified beam finite element based on higher order beam theory for two(isotropic and anisotropic) materials is carried out according to the changes of material property, stacking sequence, geometric dimension and impact velocity of steel ball, etc. Main composite materials for simulation are composed of [0°/90°/0°/-90°/0°]2s, [0°/90°/0°/-90°/0°]s and [0°/45°/0°/-45°/0°]2s, [0°/45°/0°/-45°/0°]s stacking sequences. The effectiveness of this simulation for qualitative and quantitative evaluations in composite materials subjected to foreign object impact was established.
ATO nanoparticle에 담지된 백금 촉매의 전기화학적 알콜 산화 반응에 관한 연구
이국승(Lee, Kug-Seung),박인수(Park, In-Su),정대식(Jung, Dae-Sik),박희영(Park, Hee-Young),성영은(Sung, Yung-Eun) 한국신재생에너지학회 2006 한국신재생에너지학회 학술대회논문집 Vol.2006 No.11
직접 알콜 연료전지는 액체인 알콜을 직접 연료전지에 공급하여 연소시킴으로써 높은 효율을 갖는 휴대용전원으로 주목받는 장치이다. 직접 알콜 연료전지에 담지체로 사용되는 탄소 소재는 넓은 표면적과 우수한 전기전도도를 가지고 있다는 장점 있으나 금속 촉매와의 상호작용이 약하여 촉매 활성에 영향을 주지 못한다. 산화물을 담지체로 사용할 경우 이러한 금속-담지체 간의 상호작용으로 인한 촉매활성 증가 및 입자성장 억제의 효과를 기대할 수 있다. 본 연구에서는, 안티몬 도핑된 주석산화물 (Sb-doped SnO2 : ATO nanoparticle)을 직접 메탄올 연료전지용 담지체어 적용하였으며 합성 과정은 다음과 같다. SnC14 5H2O SbC13, NaOH, HCl 수용액 혼합물을 삼구 플라스크에 넣고 100?C 온도에서 환류(reflux) 시킨 후 세척 및 건조하여 Air 분위기에서 열처리하였다. 합성된 산화물 수용액에 폴리올 방법으로 합성된 백금 콜로이드를 담지하였으며, 세척과 건조를 통하여 산화물에 담지된 백금 촉매를 촉매를 합성하였다. 촉매의 구조분석을 위해 XRD, TEM을 사용하였으며, 전극촉매로서의 활성을 평가하기 위해 cyclic voltammetry을 평가하였다. 본 연구에서는 백금의 담지량에 따른 Costripping voltammetry특성과 메탄올 및 에탄올 산화 반응 특성에 대하여, 탄소를 담지체로 사용한 Pt/C 촉매와 비교 평가하였다. 알콜 산화반응 평가결과, 주석산화물에 담지한 촉매가 탄소를 담지체로 사용한 촉매보다 우수한 활성을 나타내었으며 활성증가는 메탄올에 비해 에탄올 산화 반응의 경우 크게 증가하였다.
안국찬(Kook-Chan Ahn),정인조(In-Jo Jeong),정대식(Dae-Sik Jung) 한국기계가공학회 2012 한국기계가공학회지 Vol.11 No.4
This research is to analyze the wave propagation characteristics of anisotropic materials subjected to the low-velocity impact. For this purpose, a higher-order finite element program is used to simulate the dynamic behaviors according to the changes of material property, stacking sequence and dimension etc.. Materials for simulation are composed of [0°]10s, [45°/-45°]5s and [90°]10s stacking sequences. Finally, the results of this simulation are compared with those of wave propagation theory and then the impact responses and wave propagation phenomena are investigated.
고분자전해질 연료전지의 MEA 제조방법에 따른 성능비교
조용훈(Cho, Yong-Hun),조윤환(Cho, Yoon-Hwan),박인수(Park, In-Su),최백범(Choi, Baeckbom),정대식(Jung, Dae-Sik),성영은(Sung, Yung-Eun) 한국신재생에너지학회 2005 한국신재생에너지학회 학술대회논문집 Vol.2005 No.06
The PEMFC behavior is quite complex and is influenced by several factors, including composition and structure of electrodes and membrane type. Fabrication of MFA is important factor for proton exchange membrane fuel cell. MFA of PEMFC with hot pressing and direct coating method were prepared, and performances were evaluated and compared each other. The effect of MEA preparation methods, hot pressing methods and direct coating methods, on the cell performance was analyzed by impedance spectroscopy and SEM. The performance of PEMFC wi th direct coat ing method was better than wi th hot pressing method because membrane internal resistance and membrane-:-interfacial resistance were reduced by elimination of hot pressing process in MEA fabrication. In addition the micro structure of MEA with direct coating method reveals uniform interface between membrane and catalyst layer.
김봉환,정대식 진주산업대학교 산업과학기술연구소 2007 산업과학기술연구소보 Vol.- No.14
The turbulent energy intensity in the wake by the vortex shedding are effective for UV radiation. Therewith the effectiveness of wake generator is considered as an enhancement of UV disinfection. The numerical analysis results presented give important evidences and explain that it is possible to predict UV disinfection performance based on flow simulation. In this study, CFX program has been used to obtain solutions to the problem of three-dimensional, turbulent water flow in the UV disinfection system. An numerical investigation of two types of the vortex generator is presented. The qualitative and quantitative evaluations of the wake are made by numerical and experimental methods. From the results were obtained that the delta wing type vortex generator is more effective than circular type because of the higher vortex frequencies and the smaller drag.